I have a new iMac using OS 10.9.4. I got an external HD for backup purposes and successfully formatted it. Now I want to create partitions; however, my Disk Utilities app does not contain any tab or command for creating partitions. Where should I be looking?
View 4 Replies
I want to merge two OS X partition into one. In both of them it's installed OS X Mavericks but I don't need anymore the first partition.
Here's a screenshot of the partition table
I need to merge the 123.3 GB partition with the 34.9GB. Using Disk utility, if I erase the partition number 2, then can i merge the empty space (formatted with Mac OS X journaled) into the partition number 1, without loosing any file?
Disk Utility Crashed whilst creating a Partition, and I now have ~100GB missing, which was the amount I had allocated to the new partition.
The new partition didn't get created, and I now have 100GB missing from the Hard drive. I have a 1TB hard drive, and when I go to Disk Utility, it says: Capacity : 999.35 GB (999,345,127,424 Bytes)Available : 586.1 GB (586,103,844,864 Bytes)Used : 310.52 GB (310,524,317,696 Bytes)
Which adds up to about ~900GB.
I tried Repairing Disk in Disk Utility, booting into Recovery Mode and Repairing Disk there, but neither made a difference.
Info:
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.3)
MacBookAir,1.8GhZ,Memory 4GB1600 MHz DDR3 osx10.9.3
Finder can show and open the files from the external hard disk but can not searching for the files.
I'm a serious photographer and do my post processing in Capture NX2 (2.2.4). Sometimes, especially when saving files, it drags on interminably. I have read that one way to speed up NX2 is to create a scratch disk. I'm currently upgrading my HD on my iMac G5 (Leopard) to a 1TB HD. Would it be wise (and efficient) to create a partition on the new HD and use it as a scratch disk? I understand you can't use the boot drive as a scratch disk, but if I partition will I be able toname the new partition something other than Macintosh HD, thus permitting use of a scratch disk?
View 6 Replies View RelatedI recently formatted one of my HardDisk using the Leopard's Disk Utility into FAT32 format.
The HDD works well with the MAC however it will not mount on a windows XP machine.
The hardware detector detects the USB external harddisk but is not able to mount it. When i use the Windows Disk Management Utility, the hard disk appears with a (Not Initialized) and Unallocated warning message.
I have just had a new MBP delivered, its come through a company that provides machines for dyslexic students (myself). Its a replacement for my previous mac that I owned, suffice to say the other got destroyed. The company for some unknown reason put 2 partitions on the hard drive, its really annoying as I need to use the migrate assistant to put my old system on it and the 2 partitions are to small to accommodate it. My question.
1. Is it possible to combine these 2 partitions and if so how would I go about doing this from within the disk utility?
2. Is it also possible to transfer my partition over which held my bootcamp partition from my previous machine?
I am trying to make a single partition with Mac OS Journaled but Disk Utility won't let me. I currently have 2 partitions: MacHD with 80Gb and partition B with 3,35Gb (Partition where I used to have XP with BootCamp). I finished with XP and erased that partition to become Mac OS Journaled. Now I try to have a single partition but I couldn't. On the Partition tab of Disk Utility, when I select the whole machine (FUJISTSU MHW2120BH) the option Partition is dimmed and won't work.
I also tried iPartition, but it tells me: To make changes to this disk you should either boot from an external drive, use Target Disk Mode with another Mac, or create a bootable CD/DVD. You can create a bootable CD/DVD by running Coriolis CDMaker, which should be available from you distributor. I thought my instalation DVDs would work as bootable, but: I tried with the Tiger instalation DVDs but it makes me chose one of the partitions to format and won't let me do both at once.
I've a lot of files in Mac and my time machine back up drive now. Since most of my files are spreadsheet, doc, MP3 files and they can inter use in my Mac and Windows 7 PC. There are 4 Mac partitions and one PC partition in Mac Disk utility I can use. Do you know which partition I can use and Windows 7 PC will see them. In this case, I can just use that partition transfer the files form Mac to PC?
View 2 Replies View RelatedSeems that I have messed up my Macbook Pro hark disk. Opening disk utility on macosx 10.5.8 shows that my disk in partitioned as this:
1)Macintosh HD
2)Apple_HFS disk0s3
3)Linux Swap
All of them appear to formatted as Mac OS extended (journaled) although the Linux Swap partition appears as Unmounted and cant be mounted nor use first aid on it. the others 2 appear to ok on verify disk test. What I want to do is remove partition 2 and 3. As I mention disk utility fails both under macosx and also when i use it booting from Mac OS X install disk. Should I use something like g-parted to boot from and re arrange my partitions or will this further mess up my disk? will MBR be affected?
I'm using OS X 10.9.5, with Disk Utility version 13.
One of my internal drives has two partitions of 1 TB each.
Can I use Disk Utility to RESIZE one of the partitions to 1.75 TB?
Looking at the DU interface instructions, it says "To resize a partition on the selected disk, drag its resize control and click Apply."
However, Disk Utility says "To enlarge a partition, you must delete the partition that comes after it on the disk, then move the partition’s end point into the freed space. You can’t enlarge the last partition on a disk."
So, all I want to do is Reduce the size of the bottom / last partition; then, Increase the size of the top / first partition.
Can I safely do this by first dragging the last partition's "resize control" then dragging the first partition's "resize control"?
I wish to change partition scheme, sizes, in an external drive. All the partitions are MacOS extended (Journaled) and they map, according to the layout in Disk Utility, as follows: Partion 1, 2, 3,4 where 1 is at the top and 4, the bottom. I want to make partition 2 larger, so I decreased partition 1 by half. Now the layout is 1 a, 1b, 2,3,4., where 1b is now free space. Disk Utility will not allow me to increase the size of partition 2 by dragging the corner. Which of the following options (if any) will allow me to increase the size of partition 2, without erasing the data, using Disk Utility:Select partition 2 and manually writing a new value in the size box, equal to the present partition’s size plus the free space?If I delete partition 1 completely, will I then be able to increase the size of partition 2?If I delete partitions 1, 3, and 4, will I then be allowed to increase the size of partion 2?Is there another option?
(Actually, partition 3 is an eDrive, a data recovery utility created by TechTool Pro 7, so I don’t really know how it’s formatted.)
SeagateHD 1.5TB USB drive.
Info:
Time Capsule 802.11n (2nd Gen), OS X Mountain Lion (10.8.2), MacBook Pro, iBook Dual USB
I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
I am thinking of doing a triple boot (SL, Debian and Win7). However because I am really doing this because I can (or at least attempt), it strikes me at some point I might decide I want to go back to all Snow Leopard. Now here's the thing; is it easy to increase the space of the SL install again if I decide to trash Win7. I'll build the space for Debian at the end as I am positive I won't be trashing that partition.
So something like:
Snow Leopard - 250GB
Windows 7 - 125GB
Shared Partition (probably NTFS) - 50GB
Debian - 75GB
The most likely partition to go is the Win7 one and I would like to either add it to Snow Leopard or the Shared Partiition. That is, I would like to increase the size of one of them.
I want to upgrade my iMac G5 from its original 250GB disk to a 1TB WD Caviar Green.
View 2 Replies View RelatedI recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies View RelatedI need an AppleScript to restore a bunch of partitions from a master drive to a stack of external target drives. I don't mind partitioning them 1st, if necessary.The master drive has 16 partitions, all equally sized, and I'd like a script to run that will have Disk Utility to just go down the list restoring each partition to the matching 16 partitions on one of the target drives.
Info:
Mac OS X (10.7.3)
i am trying to format a brand new 120 GB hard drive via an external USB 2.0 enclosure. About 25 minutes ago, I selected the "erase" option and slected the Mac OS Extended (Journal) Volume format. For the last 25 minutes, disk utility has been saying that it's creating a partition map. It's doing nothing.
I have reason to believe my enclosure may be faulty. (I had a similar problem on an old hard disk and thought that the problem was with the disk; now I know.) I need to know: How do I disconnect/eject the hard disk without damaging it? The eject option in Disk Utility is grayed out. If I attempt to quit Disk Utility I get a warning telling me I could leave my disk inoperable.
I lost all data off my disk after OS X asked me if I would like to use my disk for TimeMachine.The disk was previously used on Windows, and contained data I thought I had a backup of.
The disk was a NTFS partioned IOMEGA 1tb disk. After it got formatted by TimeMachine it is HFS+. TimeMachine made a first backup to the disk, about 100gb of data. De disk contained movies from a camera which I don't have a backup of. How do I get these movies back? I've tried multiple software:
- Data Rescue 3 - Quick Scan: only files from the HFS+ partition
- Data Rescue 3 - Deep Scan: only files from the HFS+ partition
- StellarPhoenixMacDataRecovery: only files from the HFS+ partition
- TestDisk: no results
Info:
MacBook Air, OS X Mavericks (10.9.4)
I've had a 1TB external hard drive for the last year and never had a problem with it until now. Suddenly, it is showing as read-only, however, it's formatted for Mac. Do I have to re-format it?
Info:
MacBook Air, OS X Mavericks (10.9.4)
I use a 250GB external HD for most of my working files. It has five equal partitions. In one of the partitions--Cedar Mill (see attached images) --another partition (CM News) shows up in Finder. Inside CM News is another copy of itself ad infinitum...
I am reluctant to delete them without knowing what I'm doing. How they got this way.
I haven't noticed any particular problems, except possibly slow search times for opening/finding files...
Info:
iMac (21.5-inch Late 2009), OS X Mavericks (10.9.5)
I have two external hard disks, one formatted as FAT32 and another formatted as NTFS.Both cannot be seen in Finder when plug in. Only another one formatted MAC OS extended can.how to dispay my drive in the Finder (I don't want to reformat it as I have lot of contents and need to be read in my window computer.)Im running Mac OS 10.7.3 on my iMAC
Info:iMac, Mac OS X (10.7.3)
Macbook Pro running on OSX Mavericks is having problems.
Today I turned my Mac on, and it started up with a loading wheel and a loading bar. When the loading bar finished, the Mac turned itself off. I tried many times, same happened every time. I then went into OSX Recovery, started repairing Macintosh HD, but the error message saying "Disk Utility can't repair Macintosh HD" came up and now I don't now what to do.
Is there any way I can back up my files in this situation? Is there any way I can repair the disk without having to erase all data and reinstalling OSX? Or do I really need to bring it to a Apple Store for repair?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a MacBook Pro running Mavericks.
Recently I noticed that if I run Check Disk in Disk Utility, all the process works correctly but at the end it doesn't tell me that everything is correct (in green).
On the contrary, if I run it in recovery mode, (reboot w cmd-r), it works correctly to the end with the correct green result at the end.
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies View RelatedI have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............
View 2 Replies View RelatedI'm looking for the command that I can use to list all (even not mounted) partitions in OSX. The Linux command is
View 3 Replies View RelatedThis is what get when I go into Disk Utility and I want to delete the partition Macintosh 2. I see these 3 things. The "Logical Volume Group" and the 2 partitions. Where is my main hard drive? How do I get rid of the Macintosh 2.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
