OS X :: Macbook Pro Boots With A Black Screen?
Aug 8, 2010
Just about 2 hour ago I put my mac on standby because I had to do some homework, but after I finished my work and opened up my computer, the screen was black. I then resetted the computer by holding the power button down but still nothing.
The computer makes all the sounds like it normally does, it does the chime aswell. However, when I close the computer up the front light isn't pulsating, its just glowing. While my computer's screen is black I can adjust the sound (it makes the noises) and I can adjust the backlit keyboard brightness, but it doesnt respond to trying to light up the desktop. I've tried to shine a light to the desktop but can't see anything.
I've tried looking at some similar posts, tried to reset it up by holding cmd+opt+p+r.. nothing works. I can't understand this... it was working just fine only hours ago
EDIT: after leaving it for 10 minutes, the front light started pulsating as normal again, but when I open it up, black screen still.
View 1 Replies
ADVERTISEMENT
Oct 4, 2010
I left my laptop on in my room while I went to the bathroom, and when I came out, I saw the message that told me I must restart the computer. The message froze the computer, so I shut it off by holding the power button and tried to turn it back on again, but it only boots to a black screen. I don't hear the loud hard drive noise, but I hear the fans. Without AC power but with the charged battery, the computer shuts down after a few seconds. The light on the button that opens the lid is dim-to-none when the lid is open and bright when the lid is closed.
I tried many troubleshooting methods discussed on this site, like removing and reseating the RAM and draining the battery, along with the things that the Apple website suggested, like resetting the SMC and PRAM, but nothing works.
I brought the computer into an Apple Store, and after the NVIDIA test was negative, the technician told me that the problem is most likely the logic board. I also took the computer into an Apple Authorized Service Provider, and the technician there said it could be the logic board, hard drive, or boot connector. He also said that there is a very slight chance that the graphics card could have caused the logic board to fail. He tried my computer with another battery and concluded that it's not the battery's fault.
The Apple Store is charging me about $330 for a flat-rate repair. Should I troubleshoot further using suggestions you may have or pay Apple for repairs? If I decide to have Apple repair my laptop, do I need to take it back into the store to pay the repair charges, or can I do it over the phone and mail the computer to Apple?
View 6 Replies
View Related
Sep 10, 2010
It's a PowerBook G4, 15" model A1046, and this is what's going on.
Powers on, checks combo drive, gongs, no flickering or lighting on screen, period.
Tried a PRAM reset several times but it NEVER gongs a second time. I tried booting to Open Firmware and typing mac-boot, blind, but nothing. The keyboard clearly works, as the caps lock light works.
The hard drive spins up, the fans run at normal speeds, so everything else is clearly functional.
View 3 Replies
View Related
Jun 22, 2014
My imac boots up and then the screen goes black, i have made a short video to show the error...i have also run disk utility and it comes back with no errors. URL....
View 3 Replies
View Related
Jul 1, 2010
A few days ago my macbook froze, when I did a hard reboot it boots to bluescreen. I've even left it up overnight just in case it was talking awhile.
Here is what I've tried so far:
-boot into safemode, holding in shift does nothing.
-Tried to run disk utility, it said something like it couldn't be done (forgot the exact message)
-reinstall the OS from cd, but holding in c causes it to reboot.
-holding option and clicking the cd to boot from causes a reboot also
-command-option-shift-delete does nothing
-Gone into single user mode done the fsck thing, also tried this [URL]
Starting to think the HDD is shot. Just noticed an error when I type in /sbin/fsck -fy it says "Incorrect block count for file pcscd.pub it should be 16 instead of 17. Not sure if that means anything. Was able to run disk utility now, no errors were found however it still will only boot to blue screen.
View 4 Replies
View Related
Jun 2, 2014
13” MacBook Air laptop boots to a gray screen
Info:
MacBook Air, Windows 8
View 1 Replies
View Related
Aug 21, 2014
My 3 month old macbook pro suddenly has problems booting up. I press power and it goes to the gray screen with the apple logo, the gears start spinning, and then it just shuts off!
Info:
MacBook Pro, Mac OS X (10.7.5)
View 1 Replies
View Related
Apr 27, 2012
My MBPro, OSX 10.4.11 boots up to frozen blue screen with little pixelated squares.
Info:MacBookPro, Mac OS X (10.4.11)
View 2 Replies
View Related
Sep 11, 2014
macbook pro with latest software update, retina, boots up to a gray screen. The appearance of a screen opening up after the apple disappears with a border opens to another gray screen.
Info:
MacBook Pro (Retina, 15-inch, Early 2013), iOS 7.1.2
View 1 Replies
View Related
Mar 6, 2010
I am trying to install windows 7 on macbook air, through an external DVD drive, since USB didnt work for me. The DVD is detected and ounce I click start windows installation, the system boots and gets stuck at the gray boot screen with the apple logo. What is causing this? how can I solve this?
View 22 Replies
View Related
Jun 7, 2012
Holding option doesn't work, taking out the battery doesn't work, running out of ideas.
Info:
MacBook, iOS 5.1.1
View 1 Replies
View Related
Dec 22, 2010
I tried booting up my Mac Pro, and it boots into a blank blue screen. I tried this several times, but no dice. Cannot boot into safe mode either. This happened about a month ago, and I did another reinstall. When I booted into my Apple Mac OSX Snow Leopard disk to repair, and it said everything was repaired.
View 1 Replies
View Related
Jul 16, 2009
I have my MacBook set up for dual monitors. When it boots up, it boots on the actual Mac screen, not the external monitor. How can I change this?
View 2 Replies
View Related
Dec 21, 2008
I did a search but I would like to know why occasionally my 1.8 single G5 fully updated 10.4 boots up to a grey screen with a prompt> message says
to either type mac-boot (does not work) or shut-down (does work)
It happened at any stage since I bought it (second user) years ago since panther 10.3.. It even happens after repair and verify is checked.
It gets a lot of use maybe 6 hours a day so am I about to meet thy doom?
I can usually press the power button and boots ok but recently 2-3 times
to get going
I am considering getting more ram and leopard and want to find out whats causing this issue first?
View 2 Replies
View Related
Aug 24, 2010
I just go a new Macbook Pro 13' from my school (my school made it mandatory to get a mac this year) and I was installing some of my applications. Then I got the "You need to restart your computer" message. I restarted, and all i got was a blue screen with my pointer. Then after a while it says the same restart message. Also I have tried booting from the Snow Leopard Disk, but I get the same message before the actual SL installer comes up. I have been able to get the Macbook to boot in safe mode and I repaired permissions and the disk, however that does not seem to help. I have also reset the PRAM and that did nothing. I am running out of ideas... how can I fix this? I am using 10.6.4.
View 1 Replies
View Related
Oct 25, 2006
I recently got a cheap used 12 1.33 PB, that has worked great for a couple of months.Yesterday the PB shut off totally while in sleep mode. I couldn't power it back up at first, but was able to after I reset the PMU, and plugged the power cord in. The computer worked fine after that for the rest of the day.This morning, I noticed the PB shut off again during sleep mode. But this time, I can no longer boot it up. The PB chimes, but then nothing comes onscreen, and there's no hard drive activity (so I'm pretty sure its not the screen.)
View 3 Replies
View Related
Feb 8, 2012
I restarted my mac this morning after the time was broken (as far as I know, I cannot manually change it). When it booted, it booted normally. It logged me in (I am automatically logged in) then it threw errors at me. The 2 errors were from Steam and Skype, but none from the mac itself. Steam error: " Steam failed to load: *SteamStartEngine(0xbfffdea4) failed with error 1: Failed create pipe: 28". I forgot to record the skype error, but it was something to do with it not being able to find a file. At this point, the background is blue, I can see the top bar but not the dock. I then close Steam and Skype windows and the bar disappears leaving me with nothing. A blank blue screen. The dock wont come up.
I would take this to support, but they want a serial code that i cannot access because its not on the hardware and I cant access 'About this Mac" because it disappears.
Info:
iMac
View 1 Replies
View Related
Feb 19, 2012
I want to change screen into English when it boots it was all Spanish
Info:
spanish ? emac, Mac OS X (10.4.11)
View 1 Replies
View Related
Jun 19, 2012
I'm running 10.6.8 and yesterday I noticed my ipod not connecting to my computer at all. So I did a software update and restarted my computer. I don't remember what the install was because I've done this procedure before. But this time my computer restarted but held on the grey apple icon spinning wheel screen. I had to power down after several minutes. I've booted up from an bootable archived system and ran diagnostics on the directory using Disc Utilities & Disk Warrior. Directories were fixed. When I choose the main startup hardrive, same thing occurs.
Info:
Mac Pro, Mac OS X (10.6.8), 2 x 2.66 GHz Dual-Core Intel Xeon
View 10 Replies
View Related
Feb 3, 2012
Desktop restart shows flickering black/white screen, then black. Could not restart.
Info:
iPad 2, Mac OS X (10.6.6)
View 3 Replies
View Related
Jun 18, 2009
Tried everything from archive and install (wouldn't read disk2 until the 9th try and ended up with 9 system folders). Then tried an Erase and Install. Still it refuses to boot. Get's hung up at the blue screen. Will only boot in safe mode. Now for the last few days even the startup chime is missing. Tried PRAM and NVRAM resets. no help. Won't boot from DiskWarrior boot disk either. Just hangs
iMac Specs:
Machine Name:iMac G5
Machine Model:PowerMac8,2
CPU Type:PowerPC G5 (3.0)
Number Of CPUs:1
CPU Speed:1.8 GHz
L2 Cache (per CPU):512 KB
Memory:1 GB
Bus Speed:600 MHz
Boot ROM Version:5.2.5f1
Serial Number:QP52604RSDU
View 3 Replies
View Related
Feb 27, 2012
Mac mini with 10.7 boots to grey screen with apple logo? Any way to overcome this?
Info:
Mac mini, Mac OS X (10.7.3), new machine
View 3 Replies
View Related
Jun 24, 2014
Suddenly yesterday when I powered mi iMac I had some horizontal green bars on the startup screen then it powered normally. But it happened two times, now every time I power on my iMac the screen stay black, and i can use my computer, everything else is working normally (i still can use Alfred to turn off my computer).
I already tried resetting the Command+Option+P+R, it didn't work. Also the Safe mode.
I have a mid-2011 27' iMac. EMC 2429.
View 2 Replies
View Related
May 24, 2012
I came back from work to wake up my iMac. It made the noise but the screen stayed black. I tried restarting by holding the power button- I can hear it start and the chime but still have a black screen. I tried resetting the pram, and unplugging the cord but I still get a black screen. I can hear the chime though; I'm not sure if that means anything. I just had the hard drive replaced in February so I hope it's not that. just wanted to clarify that when I restart, I get the chime but the screen stays black- I don't get to the grey screen. So I'm assuming right now that my display may be shot?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.5.8)
View 1 Replies
View Related
Sep 16, 2009
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies
View Related
Jan 4, 2010
I have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
View 6 Replies
View Related
Mar 2, 2010
I'm noticing some weird behavior in my Mac Pro first gen.
Basically, when I start it up, the displays just stays black for some time, until the Desktop loads up and the computer is functional, but never displays the gray screen with the Apple logo. This just happened all of a sudden and stayed like this.
I know is not a big deal now, but I'd like to sell it in the near future and this could be problematic for that.
View 2 Replies
View Related
Mar 8, 2010
So as the title explains, since last Friday I've been trying to figure out why my Macbook Pro started getting stuck on the boot screen with the spinning gear. Sometimes a progress bar appear and it fills like 1/20th of the way and goes back to the spinning gear. However, if I boot into Windows 7, it works fine. I tried using the Snow Leopard install disk to get into disk utility and it won't even boot from cd (For reference, I tried the hold-c command to boot into the cd). The I tried resetting the PRAM, the SMC reset and the fsk thing, no bananas. I have this Macbook Pro since June 2009. I'm shot of ideas, if you guys have no idea what's wrong its a call to Apple, or a meeting with a "Genius" ugh.
View 6 Replies
View Related
Aug 2, 2010
I have an iBook G4 which was working fine. A week ago my little sister used the laptop and now I have the following problem:
a) The laptop boots because I get the boot chime, but the screen keeps black.
b) I connected an external monitor to check if the problem was the laptop monitor. When I start the computer, I get a gray screen (in the external monitor), but no apple icon () and cannot pass from this gray screen.
c) I noticed that the caps lock light was not turning on, so I accessed the open firmware (keeping hold the power button - getting a weird chime and a light flashing near the case button - power chime ) and I got the open firmware screen (still in the external monitor) and I noticed that the keyboard was not working also! I connected an external keyboard (usb) and I am able to type.
I know I won't be able to use it as a normal computer because of this weird problem. I was thinking to keep it as a "desktop" with the external monitor and the external keyboard. My questions in this case are:
a) Is it there any way I can boot from cd from open firmware? (I cannot do the "keep the 'C' key hold during start up" because my laptop keyboard does not work.
b) Because I get the open firmware console, could this be a OS problem? What I mean is that if I reinstall the OS, could I at least keep using this computer as a desktop?
View 4 Replies
View Related
May 5, 2012
I've had my mac for about three years now and everything was working fine. After I installed lion, I notice that this started to happen. I don't lose any of my information though when it does that. It just goes into a sleep mode I guess? Anyways, is this a feature from the lion update? Something standard?
Info:
MacBook Pro, iOS 5.1
View 2 Replies
View Related
