OS X :: Snow Leopard Stuck In Boot Screen - Windows Boots Fine
Mar 8, 2010
So as the title explains, since last Friday I've been trying to figure out why my Macbook Pro started getting stuck on the boot screen with the spinning gear. Sometimes a progress bar appear and it fills like 1/20th of the way and goes back to the spinning gear. However, if I boot into Windows 7, it works fine. I tried using the Snow Leopard install disk to get into disk utility and it won't even boot from cd (For reference, I tried the hold-c command to boot into the cd). The I tried resetting the PRAM, the SMC reset and the fsk thing, no bananas. I have this Macbook Pro since June 2009. I'm shot of ideas, if you guys have no idea what's wrong its a call to Apple, or a meeting with a "Genius" ugh.
I put the install disc in and went threw the windows, it started installing so I left it for a while, when I come back it has the gray apple and the spiny boot up screen, I thought no problem its just restarting after the install. Now its been like this for almost an hour. Anyone have any ideas, I'm afraid to push the power button fearing it might screw up the install.
I am trying to install windows 7 on macbook air, through an external DVD drive, since USB didnt work for me. The DVD is detected and ounce I click start windows installation, the system boots and gets stuck at the gray boot screen with the apple logo. What is causing this? how can I solve this?
My MBP(#1) is stuck in grey screen. I've tried 4 or 5 of the steps suggested to get the computer to boot up. I used Target Disk Mode to copy hard disk files to my other MBP(#2), then inserted the Mac OSX install disk, then turned off the MBP(#1) and restarted with the C key held down. Instead of getting the OSX installation, it remained grey and gave me repeating 3-beeping sounds. What does this mean?
I just tried to update my 2008 Macbook from Leopard to Snow Leopard. Install went fine but all of the sudden I got an error message, accompanied big yellow triangle with a black exclamation mark telling me that the install has failed without any further info. I rebooted and Snow Leopard was trying to install again. I thought 'why not' and continued. Then, when I had to pick a disk to install on, my Macbook harddrive couldn't be found. I thought 'screw this I'll stick to Leopard' and rebooted. After that it just stuck on the grey screen with the Apple and the loading animation. How I can fix this or at least save my files?
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
I just go a new Macbook Pro 13' from my school (my school made it mandatory to get a mac this year) and I was installing some of my applications. Then I got the "You need to restart your computer" message. I restarted, and all i got was a blue screen with my pointer. Then after a while it says the same restart message. Also I have tried booting from the Snow Leopard Disk, but I get the same message before the actual SL installer comes up. I have been able to get the Macbook to boot in safe mode and I repaired permissions and the disk, however that does not seem to help. I have also reset the PRAM and that did nothing. I am running out of ideas... how can I fix this? I am using 10.6.4.
I have a white macbook that has been starting to act a little slow. I put avast on it and found some old files that were windows files received in emails that had never been deleted (i.e. so these weren't issues and so viruses were not the problem).Â
I did a repair disk permissions and it gave the usual long list of java changes. I did a verify disk, and it found errors. So I put the CD that came with the macbook into the drive in order to start from it and run disk utility.Â
The macbook will not boot from the cd. The drive is fine and the computer boots up fine using the HDD. I did try running the hardware test but it said the version is not compatible (maybe these aren't the disks that came with the macbook??) So I booted up normally and tried even to run disk utility from the CD and it said it was the wrong version as well.Â
I researched the internet and saw target disk mode but this old white macbook doesn't have a firewire port. So I just hooked up a carbon copy clone of my desktop from a USB harddrive and was able to boot from that and run disk utility to fix the errors. So the disk errors are fixed and disk verify shows no errors.Â
However, my only outstanding issue is that I cannot boot from the CD drive. If I'm on the road and don't have the usb drive and have trouble with regular boot I will not be able to boot until I get home. I have upgraded the OS since I purchased the macbook but only to 10.6. Do I need a 10.6 startup CD as opposed to the one that originally came with the mac?Â
I want to know if you guys have a really slow windows 7 and/or Snow Leopard boot up time?I get a nasty white screen before the main selector kicks in.I'm using a mac mini late 2009.
My ibook has been working great and all of a sudden I have no display. It boots up fine, the eject button works, I can hear the volume if I turn it up or down. This is my second ibook and I really need this one to work! Its only 4 years old 800mhz,256,30GB. There are no apple repair places anywhere (other than the apple store) around here, so I'm not sure if there's something that I can do on my own?
My new 27" i7 iMac is arriving this week, and I'm trying to get everything lined up for the great awakening. Here's my situation:
My wife will use this beauty for her work during the day, and will need to use a resource-intensive, windoze-specific genomic software program that is 32-bit only. I of course will also be on it, using mostly OS X but needing to run some windoze-specific applications myself, and I can go 64-bit. I *do* have VMware Fusion 3.0 ready to go, but I'd prefer to use it with the BootCamp partitions instead of as virtual machines because this is better for my backup situation. Also, a bootable external HDD is not an option at the moment, so there's that.
So, to my question: Can I triple-boot with Win7 32-bit and 64-bit? I've read this guide but it's for XP and Vista. I have reason to believe it's possible with adequate preparation, using Disk Utility to partition the disk right away and going from there. I'm just worried about unforeseen issues. I'm thinking if it works I will somehow boot into windows and then somehow be given the option of going into 32- or 64-bit. If it doesn't, I guess I might have to go the virtual route for my 64-bit'-ness.
Randomly today when I started up my Imac I7... there was progress bar at the bottom much like if you updating your iphone... it then booted into safe mode...I restarted and it booted normal...
I have an Intel Macbook with 10.4.11 running, and I wanted to upgrade to Snow Leopard. I've heard that the $29 upgrade disc will work with 10.4, and I have a couple questions. 1. I lost the original 10.4 install disc that came with my computer - would that be a problem? 2. I'm in a college CS program, and I'd like to be able to dual boot Windows onto the laptop. I think in order to do that, I have to do a clean install of OS X after installing Windows - can I do that with the upgrade disc?
I want to run Disk utilities on my mac. Have done this before using system disk and holding C etc. Since upgrading to Snow Leopard from Leopard it no longer sees my system disk. Restart holding down C with system disk installed...and mac just boots-up normally! Ultimately I want to run the disk utility to check that the Hard Drive is healthy after install.
Info: PowerMac, Mac OS X (10.6.8), 2x3 Ghz Dual-Core Intel Xeon
I put snow leopard on my mac this afternoon and have been kicking the tires. I ran Parallels 4.0 and the windows worked just fine with my XP Partition. When I tried to boot it up in boot camp however, I got an error telling me it couldn't load windows.
I imagine this is an issue with the drivers, but I can't figure out where the drivers are and how to get them on the windows side.
When I open windows in parallels, I can't find any drivers to load on the DVD for snow leopard's boot camp.
My OSX partition shows up fine in my Bootcamped Windows 7 x64, and I can read/write to it fine. My external, a Western Digital 1tb drive formated HFS+, is connected thru firewire, and it doesn't seem to mount or show up at all.
I've been having big problems trying to solve my problem. I've checked all the posts related, tried all the solutions and still I didn't get anything, so I'm sharing my problem and hope for someone to have the solution.
I installed Windows XP with BootCamp and it was working fine. But then the HD space of the windows partition was too small and I needed more space. So what I did was erase the partition with the Disc Utility.
But before that I wanted to test the Parallels to see if the windows 7 would work fine with it. It installed easily but I didn't like the performance of it, so I just erased it with the AppCleaner. Then I erased the BootCamp partition with Disc Utility.
But when I tried to use the Boot Camp Assistant again, it only gave me the message: "The Disk Cannot Be Partitioned Because Some Files Cannot Be Moved"I've checked the forums and it was said that probably if I use iDefrag, it would solve my problem.Once I did it, I still got the same message.Then I decided to repair the dic, so I did the verification and clicked on Repair Disc Permitions and I've got this message: -The file SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" was modified and cannot be repaired.
Then I decided to reboot the whole system inserting the installation disc and pressing the C button, but all I get is a white screen and no response. And sometimes the Macbook not even start properly (also having only the white screen and no response), so I need to press the Option button till the Mac HD icon appears and I can access the computer.
And now I really without any option and I wanted to install the windows.
I got my new Macbook today. I've reformatted and installed Snow Leopard. Then I set up Boot Camp and installed Windows 7. I installed all the drivers under Windows 7 using the Snow Leopard install disc. One problem that remains is under Windows 7, I can't tap the trackpad to click. I have to use a mouse.Anyone know of a fix? Can't find it under Apple Support at all.
Over the weekend I install Snow Leopard on my MacBook and all went fine and it rebooted automatically after Snow Leopard was installed. However on Sunday when I turned on the MacBook it booted and all I had was a flashing folder with a question mark. I have read several suggestion and so far have tried:
1)Holding down different keys (C, D & X) to specify the disk but it doesn't seem to find the hard drive at this points 2)Booting from a flash drive & Install DVD and use Disk Utility to verify/repair the disk 3) re-install Snow Leopard 4) re-install Leopard 5) Erase hard drive and re-install Leopard 6) Reset PARM (?) Think that's what it was called... 7) remove hardward and re-install (memory & Hard Drive)
The hard drive appears and shows as verified in DU and repair does not give any errors but if I try to boot using the hard drive, I get the flashing "?" I've tried re-installs of the OS but once it's done and reboots I get the flashing "?" I just can't seem to get by the problem but the hard drive appears "OK" when verified or repaired.
I did some reading online, and know that the flashing question mark basically means that there's either a problem with the OS installation or the hard drive itself. I borrowed a friend's Snow Leopard installation CD (mine didn't come with the CD) to try to boot from it, but it refuses to boot from the CD.
The only keyboard bootup control that does anything so far as I can tell is the alt key (using a windows keyboard), which results a long delay while booting, followed by a blank screen with a mouse cursor. Everything else just ends up with the flashing question mark. If I try to hold C to boot from the CD, it sits there for 3-4 minutes with the occassional CD whirring sound, then ejects the CD and goes to the flashing question mark.
trying to boot in Leopard my Mac Pro will get the the gray loading screen with the "loading circle" and just sit there forever. Than after a bit it will just stop and the whole computer can shut itself down. I just installed the 8800gt upgrade kit last week, and have had no problems at all for the past week. The only thing that changed that may be related is the 8800GT XP Driver. I installed the latest beta driver for it under XP in boot camp because it wasn't working properly with the default boot camp drivers. So I can correctly boot in the XP via boot camp, but trying to boot in Leopard it just hangs at the gray loading screen.
I have osx leopard. It froze up every so often and saying 'too much application memory on start up disc'. I end up restarting my computer. I have over 100gigs on my hardrive. I restarted my computer and now it does not boot up.
I have a white macbook which has a dead battery it only works plugged in. One night i left it downloading the updates and after that the machine kepts like 10 minutes on the apple logo and the she boot to the os. I reinstalled the os but still the same. I tried to replace the ram but now flases five times and does not start. I am assuming the new ram is bad. My question is replacing the ram and the hd will solve my issue. What are the specs of the ram and how much ram could be installed? It has to be on pairs? What is the meaning ofnthe flashing light?
Info: iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
I recently upgraded my Imac Harddrive from a standard 320 GB to a 1.5 TB Segate Barracuda 7200 Rpm 3GBS. Previously I had a boot camp partition for windows 7 ultimate. When I put in the new harddrive I decided to start fresh and do clean installs. Now when I try and install Windows 7 it goes fine until the last restart (4 total including initial restart). Then it just gets stuck at the screen where it says "Push any Key to Boot from CD or DVD". It will stay like that for a few seconds then the disk will stop spinning. So my question is now what do I do? I have to have windows for work purposes and this is driving me insane.
I have an issue with a macbook pro and booting from DVD. When I try to boot from the DVD it starts reading and after a few minutes I hear the driver stops and only a gray screen with the apple logo in the screen. I have tried two snow leopard disk and the original disk that came with the macbook pro. I can boot into the operating system, repair permissions, verify disk and disk utility does not find any problem. I also tried with a usb dvd and the same symptom, after a minute it stops reading the dvd.
I'm in way over my head after promising to fix my father in laws power mac g5. When I press the power button everything seem normal. You hear the apple sound but after a short while the fans speed up the screen turns grey with a folder icon and a flashing question mark and then the apple logo appears. I have never been past this stage. I have paired the memory installed correctly and I have tried every memory combination possible. I have reset the Pmu and I have reset the pram. I also tried to remove the battery but that didn't help either. I also tried to boot from a system disc but nothing I hear the disc spinning but nothing happens.
