IMac :: Hang Up On Blue Screen - Only Boots In Safe Mode
Jun 18, 2009
Tried everything from archive and install (wouldn't read disk2 until the 9th try and ended up with 9 system folders). Then tried an Erase and Install. Still it refuses to boot. Get's hung up at the blue screen. Will only boot in safe mode. Now for the last few days even the startup chime is missing. Tried PRAM and NVRAM resets. no help. Won't boot from DiskWarrior boot disk either. Just hangs
iMac Specs:
Machine Name:iMac G5
Machine Model:PowerMac8,2
CPU Type:PowerPC G5 (3.0)
Number Of CPUs:1
CPU Speed:1.8 GHz
L2 Cache (per CPU):512 KB
Memory:1 GB
Bus Speed:600 MHz
Boot ROM Version:5.2.5f1
Serial Number:QP52604RSDU
View 3 Replies
ADVERTISEMENT
Sep 6, 2009
When I turned my iMac on this morning (iMac G5 PPC 10.5.8) it went through all of the "normal" steps (gong, grey screen, apple logo, progress wheel, blue screen) and stopped at the blue screen. Thinking it was just a fluke, I shut the machine down and restarted, only to have it stop at the blue screen again. After disconnecting everything going into the iMac except the keyboard and mouse, I attempted to boot into safe mode but it stopped at the blue screen again.
Next, I flashed the PRAM (big gong, single quieter gong) and afterward it came to the blue screen. I reattached my external drive and selected to boot from a 2-day old backup. Using the backup I was able to log into both my regular account and my "test" account (without login items). I still cannot login (except to my external drive backup).
View 4 Replies
View Related
Aug 24, 2010
I just go a new Macbook Pro 13' from my school (my school made it mandatory to get a mac this year) and I was installing some of my applications. Then I got the "You need to restart your computer" message. I restarted, and all i got was a blue screen with my pointer. Then after a while it says the same restart message. Also I have tried booting from the Snow Leopard Disk, but I get the same message before the actual SL installer comes up. I have been able to get the Macbook to boot in safe mode and I repaired permissions and the disk, however that does not seem to help. I have also reset the PRAM and that did nothing. I am running out of ideas... how can I fix this? I am using 10.6.4.
View 1 Replies
View Related
Nov 12, 2010
I have a feeling I need a new motherboard to replace my graphics chip. I was playing World of Warcraft last night when the entire computer froze and a pink grid came over the computer. Could not force quit. About 10 seconds later, Kernel Panic screen and I have to hard reboot. Every time I reboot the pink grid is still there and it kernel panics, does not get past the spinning Apple logo. I was able to hold down shift and get it to safe mode, and was able to back up my files that way. I also ran the Apple hardware test, but it said no problems found. I am typing to you now in safe mode on this pink screen.
View 1 Replies
View Related
Mar 25, 2012
Randomly today when I started up my Imac I7... there was progress bar at the bottom much like if you updating your iphone... it then booted into safe mode...I restarted and it booted normal...
View 3 Replies
View Related
Sep 21, 2008
I woke up this morning and my iMac G5 (w/ Leopard) was frozen. I restarted it manually, but it would freeze on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM - any other ideas?
What can I do in Safe Mode that might fix my comp? I haven't recently installed any applications, and I have all "open at login" items turned off.
View 7 Replies
View Related
Jun 4, 2014
my ibook g4 hangs on blue screen except in safe mode
Info:
iBook
View 1 Replies
View Related
Dec 8, 2008
My iMac G5 froze. I restarted it manually, but it kept freezing on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM.
Finally I resorted to an Archive & Install. That didn't work so I did a clean install but that didn't help either. After having done everything under the sun to it to get it to work, it will still only start up in safe mode. I even tried starting up off each of my two external fire wire drives with no luck (it froze on the fire wire screen with both drives - a Maxtor and a Western Digital). I am thinking that something on the mother board has died so that normal booting is prevented but safe mode booting is allowed.
View 2 Replies
View Related
Nov 30, 2010
I tried fsck -f fsck -y multiple times, booting in safe mode, zaping the pram and all that stuff, nothing as worked. I don't really care about how to fix it but I care more about, Is there any possible way I can get files off of the macbook even though it wont boot. Like is there a way for another computer (windows or mac) to pick it up so I can transfer files? What accessories will I need?
View 1 Replies
View Related
Mar 22, 2012
I have a 2.0 GHz early 2005 Power Mac G5 (7,3) that won't get past the light blue screen at start-up. I've tried everything - reset the PRAM, Apple Hardware Check (on overnight loops, everything came back OK), fsck (all OK), repaired my HD and permissions on it, and then erased the drive using Target Disk Mode and another Mac, and attempted to reinstall OSX from the install disk that came with it (with OSX Tiger). I've tried switching out the RAM with no luck.
The only thing I haven't tried is a new video card (the installed one is an ATI Radeon 9600). Here's what it does: powers on with the usual chime, then moves on to the white Apple screen, the wheel spins, then it moves on to a darker blue screen, then it finally moves on to a lighter blue screen with an arrow, and it just stays there. It will boot into safe mode (pressing shift), but I can't even upgrade to Leopard in safe mode, much less figure out what's wrong.
View 6 Replies
View Related
Nov 28, 2009
I've been using my Intel Mac-Mini without a hitch for three years now. Previously it had been plugged into a Samsung 32" LCD TV, but I've just swapped it over for a 1080p Panasonic 37".
Now when I turn on the mac it takes a long time to boot up and then eventually settles on a blue screen. The mouse pointer is visible but nothing else. I've tried using a dvi to vga adaptor and an HDMI to vga cable and the same thing happens.I tried a 15" Samsung monitor and the same thing happens.
If I boot in 'safe' mode it allows me to type in my password but when I try to log in it fades to blue and then returns to the log in page.
View 2 Replies
View Related
Aug 23, 2010
Upon start up, I hear the chime, see the grey Apple load screen, but then after it just reaches the blue screen and stops. Cannot reach login screen, unless in safe mode.Steps I've tried:
-Reinstall tiger (erase and install)
-Replace CMOS battery (time now works correctly)
-Run Apple Hardware Test (no errors)
View 5 Replies
View Related
May 23, 2012
Macbook air only boots in safe mode, and if I PRAM, the password for the mac does not work
Info:
MacBook Air, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 3, 2010
Soda was spilled on the side of the notebook. It was never powered on. I opened up the notebook and cleaned all the components. Now the MBP only boots into safe mode.
View 4 Replies
View Related
Nov 23, 2009
I have a number of macs one being a G5 1.8 x 2 that has been running 10.3.9 for quite some time with no problems whatsoever. Decided to upgrade to keep in line with other macs but first just to 10.4. Machine only boots in safe boot mode. If regular boot, get message that I need to restart. Restart message reappears and often fans race. May have kernell panic but did hardware test, disk first aid and all hardware checks out fine. Finally downgraded back to 10.3 and machine works fine. Did total clean install with 10.4 again and same results. Is there a firmware I need to upgrade, I can't find one. I have been working with macs exclusively since 1989 (never user a "PC") but I'm perplexed.
View 4 Replies
View Related
Sep 3, 2010
Today, my Macbook Pro 15" started to automatically boot up in Safe Boot / Safe Mode. So every time I boot up, I have to wait 5-10 minutes and stuff. It's not normal.
I tried: Restarting, Shutting down and booting.
Resetting PRAM, NVRAM
Verifying and repairing Hard Disk in Disk Utility (it fails). Tried in Mac OS and OS Installation Disk. etc. I got this computer 6 days ago, and there is already this problem. Is there a way without reinstalling the OS? I have Windows installed on it for gaming, but I don't see anything else that could be causing the problem.
View 2 Replies
View Related
Mar 26, 2010
I don't know what's happened, I restarted my mac and it started doing this: [URL] It's really odd and it happens repetedly and never stops.
View 3 Replies
View Related
Dec 22, 2010
I tried booting up my Mac Pro, and it boots into a blank blue screen. I tried this several times, but no dice. Cannot boot into safe mode either. This happened about a month ago, and I did another reinstall. When I booted into my Apple Mac OSX Snow Leopard disk to repair, and it said everything was repaired.
View 1 Replies
View Related
Jul 1, 2010
A few days ago my macbook froze, when I did a hard reboot it boots to bluescreen. I've even left it up overnight just in case it was talking awhile.
Here is what I've tried so far:
-boot into safemode, holding in shift does nothing.
-Tried to run disk utility, it said something like it couldn't be done (forgot the exact message)
-reinstall the OS from cd, but holding in c causes it to reboot.
-holding option and clicking the cd to boot from causes a reboot also
-command-option-shift-delete does nothing
-Gone into single user mode done the fsck thing, also tried this [URL]
Starting to think the HDD is shot. Just noticed an error when I type in /sbin/fsck -fy it says "Incorrect block count for file pcscd.pub it should be 16 instead of 17. Not sure if that means anything. Was able to run disk utility now, no errors were found however it still will only boot to blue screen.
View 4 Replies
View Related
Feb 8, 2012
I restarted my mac this morning after the time was broken (as far as I know, I cannot manually change it). When it booted, it booted normally. It logged me in (I am automatically logged in) then it threw errors at me. The 2 errors were from Steam and Skype, but none from the mac itself. Steam error: " Steam failed to load: *SteamStartEngine(0xbfffdea4) failed with error 1: Failed create pipe: 28". I forgot to record the skype error, but it was something to do with it not being able to find a file. At this point, the background is blue, I can see the top bar but not the dock. I then close Steam and Skype windows and the bar disappears leaving me with nothing. A blank blue screen. The dock wont come up.Â
I would take this to support, but they want a serial code that i cannot access because its not on the hardware and I cant access 'About this Mac" because it disappears.
Info:
iMac
View 1 Replies
View Related
Apr 27, 2012
My MBPro, OSX 10.4.11 boots up to frozen blue screen with little pixelated squares.
Info:MacBookPro, Mac OS X (10.4.11)
View 2 Replies
View Related
Sep 3, 2014
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
View 2 Replies
View Related
Jan 5, 2010
I have a week 50 machine with the firmware update that flickers only when Snow Leopard is in 32 bit mode. If I boot into 64 bit mode (holding 6 & 4 as the machine boots) it does not flicker. Can anyone else confirm this?
View 7 Replies
View Related
Jun 11, 2012
I attempted a safe boot after receiving a gray screen w/ spinning gear. I have since gotten a blue screen.
Info:
iMac (24-inch Early 2009), Mac OS X (10.6)
View 3 Replies
View Related
Dec 6, 2014
My MacBook is making the startup sound but goes straight to a black/dark grey screen. In other words you can see the screen switching on but it's blank. It's in charge mode, has no other external peripherals attached and it's updated to most recent OSX Yosemite.
I only purchased it in May of this year (refurbished). I have tried booting in to safe mode but again the screen remains the same. Â
View 6 Replies
View Related
Aug 25, 2014
My computer won't startup. It wants to be repaired but it cat do it so I am trying to back up files but I can't restart.
Info:
PowerMac, OS X Mavericks (10.9.1)
View 2 Replies
View Related
Jun 5, 2014
My 27" iMac will only start in safe mode. I need to back it up before service, but it will not read (or see) any external drives that I plug in. How do I back it up in safe mode?Â
Info:
iMac, Mac OS X (10.7.5)
View 1 Replies
View Related
Mar 8, 2012
I'm getting the gray screen when I startup. I tried using the install disc to repair the utility, but it said it cannot be repaired. I had to use a plug-in mouse instead of my normal wireless mouse to get the startup disc out on a restart. I want to now startup in safe mode, but holding down shift during startup with my wireless keyboard doesn't work. Do I need to have a plug-in type keyboard for this function to work? Can you backup files using safemode?
Info:
iMac, Mac OS X (10.6.3)
View 10 Replies
View Related
Jun 5, 2012
my macbook pro today started to freeze at logo scrren. I tried to start it up in both safe and recovery modes but it doesn't work either. I got the system to start in safe mode only once and the scrren looked like in the attached image.When I tried printing the screen instead of taking a photo with my mobile, the image appeared to be normal (without those noisy rectangles), but it wasnt. Then itried restarting but it's been impossible. As i said i tried booting on safe and recovery modes but the circle below the apple logo appèars and then it freezes again. I read about aproblem with the graphic card similar to mine in earlier models, I don`t know if it is the same problem.Â
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.4), 9400M/9600MGT
View 1 Replies
View Related
Jun 20, 2009
I have a new IMac 24" and it has started to freeze and not respond. At one point it would only work in Safe mode. After working with Apple for several hours, we did a complete ease and reload of the OS. It would only install the first disk. We called Apple again and made an appointment at the local store. Brought it in and it booted right up. He even reinstalled the OS for us. We brought it back home, plugged everything in and it worked. It then started having the same issues after 4 days. I forced shut it down and unplugged everything. Plugged in the keyboard and mouse and everything works. The only think we have is a Lexmark printer - X5320. The strange thing is everything was working fine for 3 months and with my Mac Mini before that. Could it be a power issue? It is plugged into a APC UPS. All hardware tests pass.
View 7 Replies
View Related
