Is it possible to implement a similar function like Guest Networking on an older Airport Extreme router? I'm sharing the internet with housemates but would like to shield my own computers from the network. Is it possible without upgrading the router?
View 1 RepliesBackground: I have a long background in computing and networking, but am new to the specific operation of the Apple Airport Extremes.
I have a network with an existing router in place that connects to the internet, and provides DHCP for the network. I want to add (potentially many) Airport Extremes to this network to provide two basic functions:
1) Wireless access to the existing network over a large office area (preferably on the same subnet as the existing, wired network, with the current router [NOT the AEs] providing DHCP services) and
2) Guest network access such that users joining the guest network can access the internet, but NOT any of the addresses on the main network.
I can find no way to do this trivially. It seems that if I set the AEs to BRIDGE mode, the option to set up a guest network disappears (perhaps reasonably so, since the AE would need to be able to manage the address range for the two networks).
I just purchased a new AirPort Extreme with the guest networking feature. I loaded the config from my previous AirPort Extreme and everything seems to be working fine with the exception of the guest networking feature. When I have a guest attempting to log into the guest network, it displays the error: "connection failed". I am able to connect my iPhone(listed MAC in router) to the guest network just fine however, my "guest" laptop that has no MAC address in the router will not connect. It sounds like a MAC ACL issue. I currently have the "(default)" set to no access.
View 2 Replies View RelatedAnyone have the new Airport Extreme? I have a question about the new features.
I'm interesting in picking one up because I've been looking for a good 802.11n router for awhile, and the simultaneous dual-band radios plus the guest networking feature are the real sellers for me. Both those features exist in part on other routers, but I'd have to put in a lot of work in a DD-WRT compatible router to get them both to work properly.
My question, though, is can both the dual-band radios and the guest networking feature be run simultaneously? It seems that from a hardware perspective, the easiest way to get a second network and SSID running would be to use the second radio, which precludes the dual-band feature. Does anyone have the new Airport Extreme yet? Can you run both at the same time?
I've currently got a Macbook and a Macbook Air connecting to an Airport Extreme Basestation with the new firmware. Both the Macbooks have 802.11n and the new Airport Utility installed. My Macbook is functioning perfectly, however, my Macbook Air has the following problems:
1) It won't connect to the AE when it is set in the 802.11n only mode at 5 GHz. It will scan for the network but not find it. It will connect in the 802.11 only mode at 2.4 GHz.
2) It prints very slowly to my HP printer connect to the AE via the USB port. It will spool the page being printed and will take about 1-2 minutes before the printer finally print it. My Macbook doesn't have any problems printing. When connected directly to the printer, the Macbook Air prints fine making me think that this is a networking issue.
I believe the printing problems started after the upgrade, but since I use my Macbook more than my Macbook Air, I could be wrong about this.
AirPort Extreme 802.11n Wi-Fi wireless networking;2 IEEE 802.11a/b/g compatible
Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology
Since Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
I was just wondering if I could connect a NAS to one of the older Airport Extreme base stations? And if so, how should I do it, over ethernet or USB. For reference it is this one: clicky The set-up is a room with 14-16 macbooks accessing the router to download a program, or set of pictures etc. Do you think this router set up with a NAS over ethernet/USB would be good for this application?
View 1 Replies View RelatedI can't seem to get my airport express to extend the guest network from my new airport extreme. It will extend the private network but the guest network doesn't show up in the list under airport utility. Is there anyway to extend the internet only except to one computer which needs to share a printer back to the original extreme?
View 4 Replies View RelatedI have a guest account set up on my Airport Extreme. I'm trying to hook up a wireless gaming adapter (xbox) to a Slingbox. It's worked in the past with linksys routers that had no security. When I set up the airport, I set security by default, but I want to remove it from the guest account. I just can't find the way to configure the guest account. I'm sure its pretty easy and just a button I can't find.
View 5 Replies View RelatedI have a guest account set up on my Airport Extreme. I'm trying to hook up a wireless gaming adapter (xbox) to a Slingbox. It's worked in the past with linksys routers that had no security. When I set up the airport, I set security by default, but I want to remove it from the guest account. I just can't find the way to configure the guest account.
I'm sure is's pretty easy, and just a button I can't find, but if someone could point me in the right direction,
1. Dual networking. You can run N on 5.0 ghz and at the same time run A/B/G whatever on 2.4 ghz for legacy devices such as the iPhone. No speed hit.
2. Easy to use guest mode which will open up one of the frequencies for use as a password less (optionally you can add a password) access to the net but locking off your computers, printer etc. on the other encrypted frequency. Great for having friends over and getting them on your network without having to open it up to attack or having to give out huge passwords for them to enter.
3. If you have MobileMe then the new Time Capsule FILE SHARES EVERYTHING OFF THE ENTIRE DRIVE TO THE NET!
So I have an AEBS that's about 1.5 yrs old. I really like the guest sharing application for a current set up I'd like to make, but I realize that it's not available with my model. Essentially, there is someone that lives in the apartment below me that wants to share the internet with me. I could use the extra cash, but I have all my media and data connected to my AEBS. Now I realize that you can password protect your HDs (which I do) but I really just don't want my neighbor on my network. Are there any alternatives? I have an old 802.11g Airport Express that I was going to connect wirelessly to the AEBS so my printer could connect to it, so that may be an option. What set ups or suggestions do you all have?
View 8 Replies View RelatedI recently took a plunge and went for a gigabit fiberoptic line. However, my speeds are extremely slow. I am currently living in Japan and was provided with an NEC router. To this I've connected an Airport Express "N". I've set this up as my WDS main and I have another Airport Express "b/g" and this is setup as my WDS remote.
I don't have the latest equipment...running on wifi I have a PowerBook G4 and on Speedtest this is getting only 1mb/s or so. I have a PC connected directly to the router and this only gets about 6mb/s. It's a Compaq D510 (so, not the latest and greatest, but not ancient).
I'm in Afghanistan and our internet service consists of a large dish, connected to a series of switches, with lan cables that terminate in individual rooms. Normal service includes plugging in the cable to your machine, where you get a login screen, allowing you to purchase internet / log in.
When I try to plug instead into my AirPort Express, I can only get the internet to work when I place it in bridge mode. I'd like to get it to assign IP addresses to whatever I add to my network so that I can use both my MBP and my iPhone wirelessly. However, when I try to use it as a DHCP device, I can never get any device to find a web page, etc.
I have an Airport Express, a Cox modem and a Samsung BD-P 1600. What do I need to have them both (AE and BluRay) wired. I understand that you can't split the ethernet signal, but I'm stumped as to what route to take.
View 2 Replies View RelatedCurrent setup: I have the dual-band Basestation and an Airport Express to extend the range. I have a MBP and a Mac Mini(Mac Mini is connected to Airport Express due to range).
Everything works fine and then one day I can't connect to my Mac Mini from my MBP on the same wifi network. The Mini will show up in Finder, but when I click, it can't connect.
A friend of mine has the following situation: In the living room he has a stereo hooked up to a single Airport Express (the only wireless router in the house.) In the sunroom he has an iMac Core 2 Duo running the latest version of Tiger hooked up directly to a DSL modem. Itunes recognizes this Airport express and successfully streams music to it. WiFi devices connect to this network but won't connect to the internet even though internet sharing is activated under the iMac's system preferences. Are there some tweaks in the settings that will make this work or does he absolutely need another Airport Express connected to the DSL modem?
View 4 Replies View RelatedApple on Tuesday refreshed its AirPort Extreme and Time Capsule wireless products by adding a new Guest Network feature and support for simultaneous 2.4 GHz and 5 GHz dual-band networking. Time Capsule drives are now also accessible over the Internet for MobileMe subscribers.
The new Guest Network feature, available on the new AirPort Extreme and Time Capsule, allows you to set up a secondary network for friends and visitors with Internet-only access so you don't have to hand out your WiFi password.
Meanwhile, the new combined 2.4 GHz and 5 GHz mode allows your AirPort base stations to simultaneously support iPhones and other 802.11b/g devices operating at 2.4 GHz, while also broadcasting 802.11n wide signals in the 5GHz band to maximize throughput for notebooks and devices such as Apple TV.
Previous-generation AirPort Extreme and Time Capsule models can only run in one mode or the other, providing either wide compatibility or the highest possible network performance, but not both.
Also new to Time Capsule -- and oddly omitted from any of Apple's press-releases -- is that MobileMe subscribers using Mac OS X 10.5.x Leopard can now now access all of their files on their Time Capsule drive over the Internet.
You need only to register their Time Capsule with your MobileMe account. The Time Capsule drive will then appear in the Finder sidebar of your Mac just like any other attached drive.
"It's like having your own personal file server wherever you go," Apple says.
The new Time Capsule, which combines an 802.11n router and server-grade hard disk for automatic wireless back-up with Time Machine, and is immediately available in two models: a 500GB model for $299 and a 1TB model for $499.
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedI just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Is there anyway to make a AirPort guest network closed using the guest network function of an AirPort Extreme Base Station?
It seems to be like the guest network is always visible, even if the primary network is closed.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedThis might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies View Related