I was just wondering if I could connect a NAS to one of the older Airport Extreme base stations? And if so, how should I do it, over ethernet or USB. For reference it is this one: clicky The set-up is a room with 14-16 macbooks accessing the router to download a program, or set of pictures etc. Do you think this router set up with a NAS over ethernet/USB would be good for this application?
Is it possible to implement a similar function like Guest Networking on an older Airport Extreme router? I'm sharing the internet with housemates but would like to shield my own computers from the network. Is it possible without upgrading the router?
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
This might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
The latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I have a Macbook (white unibody) running Snow Leopard. I have a personal wireless network using an Airport Extreme and I have an external hard drive (WD) connected to the Airport Extreme. I use this hard drive for my Time Machine Back ups.
I just got back from a trip and tried to back up my time machine. I got the error that the back up disk is not available. I then tried to open the airport utilities.
It tells me that "Airport Utilities is unable to find any Airport Wireless devices". I find this doubly strange because I have no problem connecting to the internet on this wireless network which supposedly does not exist.
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
My daughter has an older iMac (with Firewire, but probably about six years old, it runs 10.3.9) and is adding a new iMac to her home. The older one will be for her children's use, and she and her husband will use the new one. Now for the problem. The old iMac doesn't have an Airport card; one would have to be added in order for both iMacs to have internet access.
1. Where can they find an airport card for this iMac? 2. Where can I find instructions for adding this card to the iMac?
What is the best and cheapest way to get an airport extreme card? I do not want to do it myself. I just want to know the cheapest and fastest way, because I don't want to spend to much time away from my baby.
I have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used. Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I don't understand something very basic about the internet...
I have been using a 2WIRE wireless box plugged into my phone line/DSL for four years. I knocked it over and it doesn't seem like it is broadcasting a wireless signal anymore, so I bought an Airport Extreme Base Station, 2007 square model used.
I don't understand how to set it up... Can't I just throw away the 2WIRE thing now? When I try to use the Airport Extreme thing, it does not recognize the internet DSL signal or something.
I just want to use the Airport Extreme as a dsl wireless router alone.
I don't want the 2WIRE thing. The 2WIRE thing is usable when I plug my ethernet cord into it, but it is no longer broadcasing a wireless signal.
How do I set up the Airport Extreme with my DSL for wireless?
Sorry this is so stupid. I just don't understand what to do at all.
Over the past couple weeks I've noticed that my airport extreme's wireless signal has gone down. I bought it new in 2004, and it's always had a full signal everywhere in the house on multiple computers. Now the signal strength seems to be kinda random, somedays I'll have full signal and somedays it will drop to one 'bar'. I should note that it does have the latest firmware installed, and this happens on multiple computers new and old. So my question is if anybody has had this experience with airport extremes, particularly older ones?
Internet Cable Modem ----->Router------->Computers
I want to hook up a Airport extreme up to my other router but can I use the WAN port to do that if I turn DHCP hosting off? Example Below... or do I have to use the one of the Ethernet ports?
Possibly in the market for a MacMini but was wondering how well it would work if I streamed video files, mostly .avi files from an external HD connected to my Airport Extreme. Does processor speed matter, or is more important to have a good WiFi/internet connection?
I was going to buy a Mini and then upgrade the HD/RAM, but if I can get away with getting a base model and simply stream videos and other files from the drives that I have shared over the network, it would certainly save me a ton of money.
We've just moved house and signed-up to O2 Broadband. They've supplied a Thomson wireless box that plugs into the phone socket. This box, however, doesn't work with my Apple TV or Airport Extreme/Airport Disk. I've tried to make my Extreme 'extend the network' but it says the network cannot be extended.
How can I ditch this O2 wireless box and get back to my Apple-based network (considering the broadband enters my house through a phone socket rather than a Cat-5 ethernet cable that the Extreme can accept)? I want my AppleTV/Airport disk back as I had in my old house!!
I want to get an airport extreme base station to replace an old Belkin router that I use now.I have Virgin broadband and I currently connect three MBP laptops and an iphone via wifi and a Mac Pro and an Xbox 360 via ethernet to the Belkin, which is connected to the Virgin modem.The Mac Pro and one MBP also run Windows 7 using Bootcamp.I also have an old PC upstairs running windows xp that connects via wifi using a Belkin USB N adapter.All of this works fine now, but it's a bit slow due to the old router which is only pre-N.
I am going to buy a new wireless and modem etc. I have been reading until im blue in the face now and keep swapping from the Billion to Draytek etc. I want top quality as this has to supply my business etc. My netgear has now just about given up so I am replacing everything. I have now settled on this and wanted any more input on my choices:
Airport Extreme current generation refurb from Apple store Draytek Vigor 120 Modem BT i-plate New filters
I use mainly Apple gear so that is why I have eventually decided on the Airport.
I dont really need fancy features just good signal and great wireless range (have thick walls)..
I have At&t DSL, just got it a few weeks back, but have had to continue using my old internet because I cannot setup my Airport Extreme with it. I am really confused on the setting that need to be in place.
Here is the info that I have seen and tried:
Connection type on the Airport should be normal ethernet.
Setup the modem with "Bridge Mode", that is the problem right there.
With Airport Extreme you run your DSL to modem then LAN to Airport Extreme, is this correct?If so then is a standard wireless router a better option? what's the purpose of Airport Extreme?