Hardware :: Networking Airport Express And BluRay Player?
Dec 30, 2009
I have an Airport Express, a Cox modem and a Samsung BD-P 1600. What do I need to have them both (AE and BluRay) wired. I understand that you can't split the ethernet signal, but I'm stumped as to what route to take.
I recently took a plunge and went for a gigabit fiberoptic line. However, my speeds are extremely slow. I am currently living in Japan and was provided with an NEC router. To this I've connected an Airport Express "N". I've set this up as my WDS main and I have another Airport Express "b/g" and this is setup as my WDS remote.
I don't have the latest equipment...running on wifi I have a PowerBook G4 and on Speedtest this is getting only 1mb/s or so. I have a PC connected directly to the router and this only gets about 6mb/s. It's a Compaq D510 (so, not the latest and greatest, but not ancient).
I'm in Afghanistan and our internet service consists of a large dish, connected to a series of switches, with lan cables that terminate in individual rooms. Normal service includes plugging in the cable to your machine, where you get a login screen, allowing you to purchase internet / log in.
When I try to plug instead into my AirPort Express, I can only get the internet to work when I place it in bridge mode. I'd like to get it to assign IP addresses to whatever I add to my network so that I can use both my MBP and my iPhone wirelessly. However, when I try to use it as a DHCP device, I can never get any device to find a web page, etc.
A friend of mine has the following situation: In the living room he has a stereo hooked up to a single Airport Express (the only wireless router in the house.) In the sunroom he has an iMac Core 2 Duo running the latest version of Tiger hooked up directly to a DSL modem. Itunes recognizes this Airport express and successfully streams music to it. WiFi devices connect to this network but won't connect to the internet even though internet sharing is activated under the iMac's system preferences. Are there some tweaks in the settings that will make this work or does he absolutely need another Airport Express connected to the DSL modem?
I'm thinking of buying myself a Sony BluRay player for Xmas, is there currently any solution so that I can hook it up to the iMacs video-in port whilst working successfully?
I've currently got a Macbook and a Macbook Air connecting to an Airport Extreme Basestation with the new firmware. Both the Macbooks have 802.11n and the new Airport Utility installed. My Macbook is functioning perfectly, however, my Macbook Air has the following problems:
1) It won't connect to the AE when it is set in the 802.11n only mode at 5 GHz. It will scan for the network but not find it. It will connect in the 802.11 only mode at 2.4 GHz.
2) It prints very slowly to my HP printer connect to the AE via the USB port. It will spool the page being printed and will take about 1-2 minutes before the printer finally print it. My Macbook doesn't have any problems printing. When connected directly to the printer, the Macbook Air prints fine making me think that this is a networking issue.
I believe the printing problems started after the upgrade, but since I use my Macbook more than my Macbook Air, I could be wrong about this.
Background: I have a long background in computing and networking, but am new to the specific operation of the Apple Airport Extremes.
I have a network with an existing router in place that connects to the internet, and provides DHCP for the network. I want to add (potentially many) Airport Extremes to this network to provide two basic functions:
1) Wireless access to the existing network over a large office area (preferably on the same subnet as the existing, wired network, with the current router [NOT the AEs] providing DHCP services) and
2) Guest network access such that users joining the guest network can access the internet, but NOT any of the addresses on the main network.
I can find no way to do this trivially. It seems that if I set the AEs to BRIDGE mode, the option to set up a guest network disappears (perhaps reasonably so, since the AE would need to be able to manage the address range for the two networks).
Is it possible to implement a similar function like Guest Networking on an older Airport Extreme router? I'm sharing the internet with housemates but would like to shield my own computers from the network. Is it possible without upgrading the router?
Current setup: I have the dual-band Basestation and an Airport Express to extend the range. I have a MBP and a Mac Mini(Mac Mini is connected to Airport Express due to range).
Everything works fine and then one day I can't connect to my Mac Mini from my MBP on the same wifi network. The Mini will show up in Finder, but when I click, it can't connect.
I just purchased a new AirPort Extreme with the guest networking feature. I loaded the config from my previous AirPort Extreme and everything seems to be working fine with the exception of the guest networking feature. When I have a guest attempting to log into the guest network, it displays the error: "connection failed". I am able to connect my iPhone(listed MAC in router) to the guest network just fine however, my "guest" laptop that has no MAC address in the router will not connect. It sounds like a MAC ACL issue. I currently have the "(default)" set to no access.
Since Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
Apple on Tuesday refreshed its AirPort Extreme and Time Capsule wireless products by adding a new Guest Network feature and support for simultaneous 2.4 GHz and 5 GHz dual-band networking. Time Capsule drives are now also accessible over the Internet for MobileMe subscribers.
The new Guest Network feature, available on the new AirPort Extreme and Time Capsule, allows you to set up a secondary network for friends and visitors with Internet-only access so you don't have to hand out your WiFi password.
Meanwhile, the new combined 2.4 GHz and 5 GHz mode allows your AirPort base stations to simultaneously support iPhones and other 802.11b/g devices operating at 2.4 GHz, while also broadcasting 802.11n wide signals in the 5GHz band to maximize throughput for notebooks and devices such as Apple TV.
Previous-generation AirPort Extreme and Time Capsule models can only run in one mode or the other, providing either wide compatibility or the highest possible network performance, but not both.
Also new to Time Capsule -- and oddly omitted from any of Apple's press-releases -- is that MobileMe subscribers using Mac OS X 10.5.x Leopard can now now access all of their files on their Time Capsule drive over the Internet.
You need only to register their Time Capsule with your MobileMe account. The Time Capsule drive will then appear in the Finder sidebar of your Mac just like any other attached drive.
"It's like having your own personal file server wherever you go," Apple says.
The new Time Capsule, which combines an 802.11n router and server-grade hard disk for automatic wireless back-up with Time Machine, and is immediately available in two models: a 500GB model for $299 and a 1TB model for $499.
Anyone have the new Airport Extreme? I have a question about the new features.
I'm interesting in picking one up because I've been looking for a good 802.11n router for awhile, and the simultaneous dual-band radios plus the guest networking feature are the real sellers for me. Both those features exist in part on other routers, but I'd have to put in a lot of work in a DD-WRT compatible router to get them both to work properly.
My question, though, is can both the dual-band radios and the guest networking feature be run simultaneously? It seems that from a hardware perspective, the easiest way to get a second network and SSID running would be to use the second radio, which precludes the dual-band feature. Does anyone have the new Airport Extreme yet? Can you run both at the same time?
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
Can it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info: MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
I currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
I recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
I have an Airport Express and when I go to configure it it does not appear on the list of available networks. I have the AC plugged in and ethernet cable from my router attached to it. I get nothing! The light on the AE is green but my iBook G4 can't see it. From what I've read this looks to be a fairly simple plug and play operation.
I have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used. Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I'm looking for a repeater of sorts, similar to the Airport express, but just not as expensive.
The issue is that my macbook drops out randomly, sometimes it just goes through phases where it drops the connection about 20 times in 30 minutes.
The issue is that the modem-router cannot be moved as its phone line based, so I think my last option is a repeater. The Express seemed ideal as its a small, simple unit that can be plugged straight into the socket, which would be perfect for where I wish to place it - is there a cheaper alternative?
Just tried to set up my Airport Express but it shows a flashing yellow light (meaning it isn't connected to my router) and it isn't even recognised by Airport Utility!