My MacBook Pro has had trouble burning DVDs and I noticed that there is a virtual DVD drive. How do I get rid of it? It's not on my desktop, but it messes up Toast and iDVD. Here is a screenshot of Disk Utility.
View 2 RepliesI'm not a total newbie with mac and computers in general, but I cannot get the one and only super drive to eject... yes, I have hit the eject button, it shows the eject icon in the screen and nothing...how can I get the thing to eject?
View 17 Replies View Relatedafter I get a bad burn (it's very rare, but it does happen), I get a stuck DVD. I can't open the DVD tray unless I either restart the computer or wait a &$?# long time before it gets done trying to read an unreadable DVD. Even the terminal won't allow me to open it. Is there a way to get the DVD tray opened "immediately"? Sucks to think that we don't have control over that.
View 14 Replies View RelatedAre there any specifics I should know about the second drive bay? I'm planning on buying just a really fast CD-ROM drive to put in there - can I get any ole' one? I noticed that the Apple drive does not have a faceplate - does this mean I have to remove the faceplate from whatever drive I get? Are there drives available that already have no faceplate?
I never used Mac OS X with more than one optical drive - how does opening a drive work? Does the eject button open both drives? One at a time?
I just got an external LaCie DVD burner (long story). It works great, but as of right now I can apparently only eject it by right-click > eject or drag it to the "trash." Is there any way to allow me to just use the button on the drive or tie it to the eject button on the keyboard when it's connected, or even another key command like Opt-Eject?
View 5 Replies View RelatedHow do I eject a CD that won't come out of the optical drive on a MacBook Pro . I have tried the ejcct key on the keyboard. There is no longer an eject disk on the drop down menus.
Info:
Mac OS X (10.7.3)
I'm not a total newbie with mac and computers in general, but I cannot get the one and only super drive to eject... yes, I have hit the eject button, it shows the eject icon in the screen and nothing... how can I get the thing to eject?
View 4 Replies View RelatedThis is pretty urgent. I've got a late 2008 15 inch MBP (the one with the express card reader) and I put in a DVD and it wouldn't read it. As it didn't read it, I can't eject it, and this is pretty bad.
View 3 Replies View RelatedI just got an external LaCie DVD burner (long story). It works great, but as of right now I can apparently only eject it by right-click > eject or drag it to the "trash." Is there any way to allow me to just use the button on the drive or tie it to the eject button on the keyboard when it's connected, or even another key command like Opt-Eject?
View 1 Replies View RelatedHere's what happened. I bumped my Mini fairly hard, and the audio immediately cut out. I was watching some streaming video at the time, and the video kept playing. I tried to restart. Beach ball. I turned the comp off and back on. Folder with question mark. After messing around with that for a bit, I tried putting my 10.6 DVD in and starting from that. It didn't work, but that doesn't matter since that problem fixed itself after a few restarts. The problem is that the DVD is now stuck in the drive and the Mini doesn't recognize the drive any more. The drive momentarily spins up at startup, but that's it. If I have to take it apart to get the disc out, that's fine. I have the tools and have done it before when I upgraded the RAM. I just want to avoid that if possible.
View 13 Replies View RelatedA disk is stuck in the optical drive and the Mac isn't picking it up and I can't eject it.
Info:
MacBook Pro
I have a mac pro with two optical drives, I have no problems ejecting both drives in osx.
Option+Eject works fine. What is the key combo in windows?
Everything I've tried just open/closes the bottom drive. I've tried numerous searches with no results
i went back and looked and found i had swapped cables! EEK...odd though, that the raw command from the command line knew which drive was which?...Kept here for posterity just in case you were wondering what i wasted bandwidth on...Moderated please feel free to delete whole thing if you wish i hope someone can help me because i'm confused.i decided to salvage the old superdrive from my old G5 macpro and install it into the 2nd optical drive bay (lower) of my new mac pro.problem is, even though i don't think i swapped anything, the EJECT key now defaults to the lower optical drawer when it deafulted to the upper optical bay with the 2nd drive not installed.
View 3 Replies View RelatedWe have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
View 6 Replies View RelatedI am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly.
I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
View 1 Replies View RelatedMy slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedI recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
I've got a PowerPC G5 running 10.4. After four years of dedicated service, my Superdrive gave out, so I bought a Sony drive (SONY DVD RW DRU-842A in profiler) to replace it. Here's the trouble:
Any time the machine goes to sleep with a disc in the drive, it won't eject when I wake it up. I have to restart, then eject. Other than that, the drive works beautifully. If this question has been answered elsewhere, please redirect me there, sorry for the repost.
Speaking of sleep, when I put the machine to sleep through the menu it goes fully to sleep (no fan/other noise). But when it goes to sleep on its own, I can still hear the machine churning away. Any ideas? My roomate has a newer Mac Pro that doesn't do this.
I installed a Virtual Drive a while ago, and now I can't get rid of it. An icon sits in the title bar and a Disk is present in Disk Utility. How can I remove these?
[URL]
I installed a Virtual Drive a while ago, and now I can't get rid of it. An icon sits in the title bar and a Disk is present in Disk Utility. How can I remove these?
View 2 Replies View RelatedDoes anyone know of a virtual drive programme that supports o sx 10.4 (Tiger) ? I've got an iso file that I need to install but virtual cdrw keeps telling me that the disk you inserted is not readible by this computer.
View 1 Replies View RelatedSo I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
I used the typical installation in parallels 5, of which it automatically set up the virtual hard drive size. if I find I need more space later on, is there anyway I can expand the virtual hard drive size? I have a macbook pro i7 2010 running windows 7 pro 64 bit.
View 1 Replies View RelatedVery excited to have XP running smoothly using Virtual Box.
But I have not yet found how to have my flash drive show up in my computer
How do I delete macbook pro osx 10.7 virtual partition on virtual box? I already deleted the virtual machine and the app but the partition is still there.
Info:
MacBook Pro, Mac OS X (10.7.3)
do I delete virtual partition on virtualbox? I'm using Mac OS X v10.7 Lion and installed Window7 through virtualbox. I decided to use boot camp instead so I deleted the virtual machine and the the app. However, the partition is still there. How can I remove/delete the virtual partition.
Info:
MacBook Pro, Mac OS X (10.7.3)
