I recently bought a 04' g5 power mac to replace the g3 I had and to save money I kept the old keypad. How do I open the optical drive slot to insert a dvd/cd without having an eject button on the keypad I kept?
I am new to mac. When I insert a cd/dvd into the slot loading drive, I have to push the cd in rather far before it actually catches it and pulls it in. Is this normal or is it supposed to only be pushed in about half way. When it ejects it seems that it pushes the disc out much further. Is there something you must do before inserting a cd, or do you just push it in?
This is not related to the other bluray thread on here. I am looking for a slot loading Blu Ray drive (I do not want write capability) for my iMac Aluminum. I know fastmac sell a Bluray drive for $999, but that has the unnecessary write capability which jacks up the price. So, does anyone know where to get a slot loading BD-ROM for the iMac?
I have a g4 slot loading drive and I am fulling aware the outside casing would be wrong... but that isn't much of an issue, I can replace the panel/casing section with a new panel to take care of that... i just want to know if it is possible as far as hookups etc are concerned.
My friend was thinking of getting a new iMac, the only thing he does not like about them is the slot loading drive. He burns around 5 cd's/DVD's a day, a stack of 100 cd's does not last long with him. He does a lot of movie burning to watch it on his tv and wonders if after a year of tons of burning will the slot loading drive die out. He does not want to buy an external DVD burner as well which is what i use.
I have been reading and reading but I can't seem to find the answer. Im trying to figure out if the optical drive for the iMac has a slimline sata connector or a standart sata connector. Reason is I'd like to install an SSD and use an optibay adaptor.
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
So I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start? I have tried to firewire but not joy their either!
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
I am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly. I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
Ok I still have my iworks cd from when I bought the MB. Im thinking of getting the MBA tomorrow possibly. without buying a superdrive how could I get iworks onto the MBA. if I brought it with me could they just do it at the store?
Some of the new macbook pro 17" have been reported shippping with a Toshiba SSD. According to the results it stands for Super Snail DriveShould I be scare to find one of those in my next MBair 1.86 SSD ?
I have an old black Macbook (about 6 years old, with all of the recent downloads, etc.). I am going to get a Mac Air Book and I wanted, before I bought the Mac Air Book, to try out the external Super Drive with my old MacBook (which is working fine for burning and reading CDS and DVDS) ... I plugged in the USB cable of my brand new Super Drive to my old MacBook but when I inserted the blank CD into the slot of the external Super Drive, the CD was not taken up by the SuperDrive. It went in perhaps 95 - 98% of the way but did not "take hold" the way I suspected it would. I know that I don't need this Super Drive for my old MacBook but I wanted to see if it would work with it .. in anticipation for getting the Mac Air Book. Does this mean that I have a defective Super Drive ? Or does it mean that it will only work with a MacAir Book ... or what ? I am sure there are some easy answers. Or should I force the CD harder into the Super Drive ?
I just installed a new Samsung Lightscribe drive from OWC and now neither my Super Drive nor the new drive shows up. When I check my Sys Profile under Disc Burning this is what is showing up. No burning device was found. If you are using an external device please make sure that it is connected and powered properly.
I recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
The last couple of months my 2 year old white Macbook does not read audio cd's anymore. Once in a while it will load one, most of the time the first after a restart, but after that every audio cd will be ejected after several attempts of my superdrive to load the cd. Data cd and dvd's play just fine, and cd-r's can also be burned, no problems there.
Been searching but nothing specifically addressing this issue. I can put in DVD's and music cd's but a blank CD-R is just not recognized. Just had this superdrive replaced 6 weeks ago.
Just wanted to let everyone know I had to update Mac OSX to be able to use the superdrive on the new macbook pro retina display. Before that it would show me what was on the disk but I couldn't access it. Even after I updated it I had to browse through finder to find the drive to be able to run what was on the disk, as it didn't pop up automatically.
I have VMWARE and Vista ultimate full edition and do NOT have a super drive. Any ideas on how to go about getting Vista to work in VMWARE because it is not recognizing the disc via "Remote Disc" feature
I do NOT have the superdrive and would like to install windows XP pro on my MBA with VMware Fusion. I've tried making .dmg, .iso, & .cdr images of the windows XP disc but i'm having NO luck with Fusion recognizing the disc image. When I create the new Virtual Machine I select "use disc image" and point to the appropriate disc image file. I keep getting a "no bootable device" error from fusion.
Can somebody who has successfully installed windows on an MBA without using a superdrive give me the step by step instructions you used...I'm getting pretty annoyed at this point.
Okay so I'm thinking of putting a Intel SSD in my MacBook Pro 13" as soon the next generation is launched thus removing the SuperDrive in order to fit both drives. I haven't used it a lot of times but a few times I do need it and that's why I'm now asking this question.
What external DVD enclosure will work with the MBP SuperDrive if any and how will i eject the DVDs. I'm not going to shell out a 100 bucks plus shipping to Sweden for the MCE Optibay so that's out of question, however cheaper ebay alternative that ships to Sweden with reasonable shipping is okay.
Also while I'm here. I've been thinking about upgrading to 8GB ram kit however a friend of mine told me any ddr3 sodimm ram won't work which sounds weird but to be safe I'm asking if that's true? I'm thinking of buying a Corsair 8GB(2x4GB) 1333MHz kit.