Hardware :: Won't Get Hard Drive Screws And Optical Drive Standoffs
Jul 7, 2006
I am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly.
I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
View 4 Replies
ADVERTISEMENT
Aug 12, 2008
So i got a new macpro, and i installed 3 drives in the remaining three bays and i wanted to replace the stock/factory drive withi my own, however the screws were badly stripped like the installed had a bad time trying to get it in there properly. im wondering if theres anyplace to pick up some replacement screws for the 2008 MP models. called apple said they dont have those in stock to just ship out.
View 5 Replies
View Related
Aug 31, 2009
Is there any place that sells these screws? After a few HDD swaps the heads of some of my screws have worn down.
View 1 Replies
View Related
Aug 5, 2009
I'm literally two steps away from installing a new hard drive and I can't get the torx screws out. Is it absolutely vital I take them out and put them in the new hard drive?
View 6 Replies
View Related
Dec 8, 2009
Where do you get replacement screws for the hard drive sleds? I stripped out a few of mine after replacing some hard drives over the past couple years. Also, is there some special screwdriver you are supposed to use to remove the screws other than a Phillips head screwdriver?
View 6 Replies
View Related
Sep 8, 2010
Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies
View Related
Aug 28, 2009
I upgraded my hard drive in my 1st gen unibody MacBook Pro and I have the old drive just laying around. I am thinking of reformatting the drive and using the drive to test stuff out in. where I can purchase four of the hard drive screw/posts? I tried going to the Genius Bar, they referred me to Apple Care, who referred me to an authorized apple dealer... Who want to charge me an hour of labor. I tried to look for them at Fry's but no luck.
View 3 Replies
View Related
Oct 8, 2009
I tried changing the hard drive on my MBP, only to totally strip the screws on the hard drive bar. Took it to Apple, they are happy to repair it, they said they may have to break the hard drive bar in order to get it out, but no problem. However, my local Apple Store is closed for a refitting until 30/10/09 and they want �48 in order to do the repair. That leaves a slightly bitter taste in my mouth considering it's such a small job. I'm wondering if anyone has had any experience with 'screw extractors'? They are little screw bits that bite into the screw in order to turn it. They are about �9 for a set so could save me a bit of cash. To be honest, it's not the money that's the problem, I don't want to wait another 3 weeks. I'm not really wanting to drill into the screw or glue a hex key, so the 'screw extractor' is the only option really. Just wondered if anyone can vouch for these little extractors. If not, then I'll suck it up and Apple loose on my machine.
View 16 Replies
View Related
Jul 9, 2010
Anywhere to find replacements? It's the two top screws holding the bracket in place. How am I going to get these things out? I am not sure why they are so tight this time.
View 7 Replies
View Related
Mar 12, 2010
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
View 8 Replies
View Related
Sep 19, 2010
I just bought a new Mac Pro 6-core and an OWC 120Gb SSD drive. My question is putting the SSD on optical drive bay or Hard disk drive bay, is there any difference in performance? My understanding from my old PC is never to share the SATA cable with the optical drive as it will take the transfer speed of the optical drive, because they are running in the same "channel"?Is the 2 SATA cable in the optical drive bay 2 separate distinct ports/channel?
View 6 Replies
View Related
Feb 5, 2010
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
View 1 Replies
View Related
Aug 22, 2009
I read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies
View Related
Feb 23, 2012
I recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
View 6 Replies
View Related
Dec 3, 2009
well while attempting to replace my hard drive I like many other people I completely stripped out the two screws on the hard drive bracket on my 15" PowerBook G4. They are very small screws, and I thought I had the correct size philips but apparently not. I tried to cut a slot in one of them with a Dremel but that only destroyed the entire head of the screw and sent bits of shavings everywhere. What can I do to get these screws out? Should I drill them out? I just can't think of any other way to get them out when one's stripped and one is worse than stripped. Is it possible to get replacements?
View 4 Replies
View Related
Feb 18, 2010
I was wondering if anyone had successfully installed and 2nd hard drive in their iMac?I have a 2 year old 2.8 24'' iMac and the performance just isn't cutting the mustard, it's all hard drive related and I already have a decent 1TB drive in there.I was thinking of perhaps swapping the optical drive with a second hard drive for RAID0, but not too sure if there will be space and was wondering if the optical drive is a standard SATA connector, or if there is some way I could run a SATA+power cables externally?
View 7 Replies
View Related
Oct 28, 2009
So how hard would it be to install an SSD in the second optical drive? is it easier then trying to put it in a tray/ at least more beneficial? Does anyone have pictures of how they did either of these things? I am looking to do this cheap/free i know I will probably need to buy an sata and power cable, but is there a safe way to secure the drive for free or very cheap, ie not buying a specific adapter tray or bracket?
View 24 Replies
View Related
May 18, 2008
I was able to manuveur a new sata cable under the fan assembly and connect it the mac pro ON Board Sata connector. Im close to installing a new Hitachi 1tb drive in the optical bay, using the molex power connector there, and my new sata dongle connector. Question: Where do I get that adapter for 5.25" to 3.5" for the hard drive to mount in the optical bay? Ive been googling for 1 hour and I found 1. Noiseblocker NB X-Swing $25 -- Hard to find anywhere in USA to buy it. 2. TransItnernational Pro Caddy -- $39 -- and No noise dampening.. just big cage. 3. The metal rails that come with many ex hard drives. 5.25" to 3.5" standard brackets. $9. looks like this causes the most noise problems. Can you guys recommend which one/where to get my last ingredient for the 5th drive install in the mac pro optical bay.
View 10 Replies
View Related
Mar 1, 2012
I have a SSD in the main bay and have my stock Toshiba 500GB 5400RPM installed in the optical bay with a hard drive caddy. When I boot up I get stuck at the White Apple scrren with the spinning dotted wheel or it boots up to the desktop and my mouse and keyboard freezes. Has anyone else experienced this problem or have a resolution? I tried two separate hard drive caddys and two separate hard drive thinking these might be the problem with no luck.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
View 5 Replies
View Related
Apr 8, 2012
I have bought a caddy from ebay some time back to replace the optical drive with ssd. It worked great. Here is my current configuration: SSD is in optical driveStock hard drive stays same as it was Now I am planning to upgrade SSD and install the drive in the place of stock hard drive instead of in optical drive (to take advantage of higher speed). But the stock hard drive doesn't fit in to the caddy that i bought. It worked great for SSD, but not the internal hard drive.
1) Can someone recommend suitable caddy model, (hopefully cheaper one). Or if i take out the screws from hard drive, it may fit into the caddy that i have.
2) My admin user is configured in SSD, which should not have any problem after migration. But my regular user is in stock hard drive.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Oct 3, 2010
Mine is 2005 model mac mini.
Model Identifier: PowerMac10,1
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
this is an old machine, can i replace optical drive with sata hard disk 2.5'' with any size like 500GB, Internally not externally.
View 4 Replies
View Related
Aug 7, 2009
On my Rev. C. Before I installed it, my fan kicked in only when I had a external device attached, hard disk drive, optical drive, etc. Now it runs more often. Not a big deal, but thought worth mentioning.
View 5 Replies
View Related
Jun 5, 2014
My slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
View 1 Replies
View Related
Dec 7, 2010
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies
View Related
Jul 7, 2010
So I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
View 1 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Jun 3, 2012
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
View 2 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
