I'm trying to burn photos to disc but get message there is not enough memory to do so. I have deleted all extra photos and movies and files possible but message continues. Is there something I can look at on the Pro to see where all the memory is being used?
I have the 10.4 install discs copied to my computer and i am currently running 10.3, I need to make a boot disk from the 10.4 files so I can install 10.4 on my computer
I am having difficulties burning 88.x MB DMG files to CDs (new CD-Rs and an old CD-RW) onto two different external USB2 disc burner drives (both have power AC connected: HP and LG Super brands). The new Mac Mini (no disc slot drive)'s updated 64-bit Mac OS X 10.7.4's Disk Utilities tries to burn and then fail right away or after a few seconds. The error says "Unable to burn 'whatever.dmg' (The disc drive did not respond properly and can't recover or retry." Nothing interesting in dmesg, but Disk Utility's logs had details:[URL].Â
I do see my drives' lights on during the burn. I can quick erase the old CD-RW fine. I can burn 538 MB from an 64-bit Windows 8 on my Acer AM3800 PC with the same discs and external burner drives without any problems. Also, I thought it was my USB cable extension, but it wasn't it. I don't use any USB hubs either. DMG files are fine too. I did notice copying from a CD to Mac Mini's local HDD was slow, but no failures.Â
I am having difficulties burning 88.x MB DMG files to CDs (new CD-Rs and an old CD-RW) onto two different external USB2 disc burner drives (both have power AC connected: HP and LG Super brands). The new Mac Mini (no disc slot drive)'s updated 64-bit Mac OS X 10.7.4's Disk Utilities tries to burn and then fail right away or after a few seconds. The error says "Unable to burn 'whatever.dmg' (The disc drive did not respond properly and can't recover or retry." Nothing interesting in dmesg, but Disk Utility's logs had details: url...I do see my drives' lights on during the burn. I can quick erase the old CD-RW fine. I can burn 538 MB from an 64-bit Windows 8 on my Acer AM3800 PC with the same discs and external burner drives without any problems. Also, I thought it was my USB cable extension, but it wasn't it. I don't use any USB hubs either. DMG files are fine too. I did notice copying from a CD to Mac Mini's local HDD was slow, but no failures.
It is supposed to be the best burning package on mac. But I doubt it. I convert videos to dvd-video format using the absolutely brilliant windows7 application convertxtodvd. Please dont tell me to use a mac application instead of it. I tried it many times, there were always several problems(slow speed, subs etc). This is not the case here.
So, I want these dvd-videos in Video_ts format, to be burned in dvd disks using toast. It is supposed that video_ts folder are a standard folder, no matter the system you use. But toast has a different opinion. When I drag the folder in the dvd-video window, it asks to re-encode the video!!!If I try to burn this video_ts folder in windows machine using 'nero', no problem at all, straight burning! I really cannot understand why this happens.
Another problem I have is that the files I want toast to burn, usually reside to network computer. Is there any way to burn files from a network computer(win) using toast? Can toast access network or not? If not, I have to manually copy files to local disk, several minutes spent for copying gigabytes just to be able to burn them.
My friend ripped a CD via EAC into FLAC files, so that I could then burn a CD-R copy. I've done this multiple times without issue. However, with this current rip, the total file size is 708MB and does not fit on a regular CD-R disc. I'm a bit confused because all the files were ripped from a single Red Book CD. Is there anything I can do to reduce the total file size so that it fits on a CD-R disc (without removing one of the files)?
I recently burned a project to DVD. It's a data disc, and seems to have worked fine, about 1.2 GB of the four available on the DVD-R I burned with a Superdrive on my G4 desktop.
I told it to write session in Toast 7 Titanium, but when i try to burn something else to the disc, Toast rejects it. With DVD's, can you only burn one data disc? No multiple sessions? It's okay if this is the case, I just want to know.
I am having trouble burning a disc of a slide show to be used on a windows PC. I haves managed to burn one which operates ok on the mac but cannot fathom out how to do one for a PC
Info: iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
When trying to burn a DVD via Finder, I get an error message of 'error code:- 0x8002006E and the disc wont burn. One time the disc wouldn't eject but I finally manged to do this via Disc Utilities. I have also tried to burn the DVD through Disc Utilities but it seems to get stuck when trying to create a new disk .dmg file.I recently had to have a new graphics card installed, and have had a few problems since with sleep and mounting external drives. Could this be connected?Â
Model Name:Â Â Â Power Mac G5 Model Identifier:Â Â Â PowerMac7,3 Processor Name:Â Â Â PowerPC G5Â (3.0) Processor Speed:Â Â Â 2.5 GHz
I set up iDVD to burn a disc of my movie; it did so just fine. I saved the set up, then tried to reburn additional DVDs. It opened ok, but refused to burn anything-when it got to the "Burn" stage, it would display "recording finished" then lock up.
Are there some preferences I can trash on this, or what?
Created iDVD with slideshow and music on my 5 yr old MBP.Tried to burn it to a Staples -R DVD disc.It appears to be burning for about 35 minutes, then with one minute left, it stops and ejects the disc.No error message. I saved the file as a Disc Image and was able to view it with the DVD player on my MBP.However, when I went to burn it to the disc, I got this message:"The disc can't be burned, because the device failed to calibrate the laser power level for this media."
I create my own music and sometimes people ask if they can have it on a CD. Since I really do not want people to be able to rip it to their computer's I have denied these requests. However as the demand apparently grows and more people start asking I feel that I would really want to be able to share my music with them, securely. What I would like to do is burn a cd containing my music that people cant rip. I know there will always be some way of doing it, but fore the average computer user preventing mediaplayer/itunes from being able to rip the music will be enough to keep them from doing it.
I tried to burn 1.4GB of data on a 4.7GB blank DVD using Finder but got an error message saying "file is too large to fit on the disc. Remove some files an try again". I'm on Mac OS X 10.6.8.Â
Whenever I burn pictures to a disc for some reason they duplicate. There will be two, three, four and sometimes even five copies of each picture or folder of pictures. What can I do to prevent this from happening. I would like to burn only one copy of each picture on the disc.
Info: MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
I've tried six times to burn 290 photos, exported from iPhoto, to a RW DVD. The pictures export OK, the transfer to the DVD seems to go OK but it's when the disc is being verified that the problem occurs. It gets to somewhere around 25% verified then returns the message below and ejects the disc.
I only seem to have two burn settings:Â Max (2.4x) and 2.4x - I've tried both and failed.
As a test, I sent a mere 10 photos to a disc and that worked. Then I tried 100 to a new disc and it failed again. But the discs' capacity is 4.6 Gb.
In the past I've successfully burned several hundred photos onto many discs from the same manufacturer.
I'm not sure what's going on. Is it possible that the disc burner on my iMac is broken.
I think my superdrive died in my dual-core PM G5. This is what it's doing: I'll insert a DVD and it'll sit for a few seconds, then eject it. It DOES show up in my system profiler though. Is it dead, or is this a software problem? Oh- I should mention that the last thing I did was use Visual Hub to burn an AVI to a DVD. That worked fine. Afterward- nothing. I'm running OS 10.4.9. Help!
I read a few old threads about this that said to check the disc permissions on disk utility and did all that. I read something else that said turn the computer off and turned it off and then on again but it didn't work. This is the first disc I have tried to burn since downloading mavericks. I haven't had any trouble before although I don't burn too many discs. I have an early 2009 iMac.
Info: iMac (20-inch Early 2009), OS X Mavericks (10.9.4)
So, yesterday I went to burn an audio cd in itunes. When I clicked burn I recieve a message that stated "Disc Burner or Software not found." I then went to About this mac in the toolbar and click "Disc Burning" and it states that there is no burning device found. Help would be appreciated, here are my specs Mac mini C2D 1.6Ghz 2Gb Ram OSX 10.4.11 I know its there(Combo CD burner/DVD reader drive.)
The other prob is that there is a disc stuck in the drive. I have tried all the various methods to eject the disc to no avail including rebooting and holding Cmd-Opt-O-F then typing eject cd but alas I "have no cd drive"
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error."What does this mean and how do I fix it?
Im using a 17" unibody macbookpro 2.66 early 09 to make a copy of my Leopard Disc to put in an offsite storage location. Im able to rip movies and burn movies (DVD-R, DVD-RW, DVD-DL), iMovie videos, iTunes cds, rip audio discs, etc. The media is Dual-Layer DVD-R in disk utility I burn it at the slowest possible speed (on both systems) at 2.4x
After it writes the data to the disc and finishes, i get this lovely image:
I tried doing a test install of it from the burned dvd and it installed fine.... = what the huh!?
its done this twice. using the same media on a 15" 2.2ghz uMBP late 2008 gives me a completed successfully notification every-time.
burn info:
17" Superdrive info: HL-DT-ST DVDRW GS21N:
Model: HL-DT-ST DVDRW GS21N Revision: SA17 Serial Number: KZZ91OM5217 Native Command Queuing: No Detachable Drive: No Power Off: Yes Async Notification: No
15" Superdrive info:
MATSHITADVD-R UJ-868:
Model: MATSHITADVD-R UJ-868 Revision: KA14 Serial Number: dE0E4283 Native Command Queuing: No Detachable Drive: No Power Off: Yes Async Notification: No
Log Files from the 17" uMBP
Here are the Disk Utility Logs
Quote:
2009-08-23 15:19:30 -0700: 2009-08-23 15:50:48 -0700: Eject of �disk2s3� succeeded 2009-08-23 15:50:51 -0700: Burning Image �Mac OS X Install DVD.dmg� 2009-08-23 15:51:02 -0700: Image name: �Mac OS X Install DVD.dmg� 2009-08-23 15:51:02 -0700: Burn disc in: �HL-DT-ST DVDRW GS21N� 2009-08-23 15:51:02 -0700: Erase disc before burning: No 2009-08-23 15:51:02 -0700: Leave disc appendable: No 2009-08-23 15:51:02 -0700: Verify burned data after burning: Yes 2009-08-23 15:51:02 -0700: Eject disc after burning 2009-08-23 15:51:02 -0700: 2009-08-23 15:51:02 -0700: expected CRC32 $0F91EA17 2009-08-23 15:51:02 -0700: Preparing data for burn 2009-08-23 15:52:25 -0700: Opening session 2009-08-23 15:52:31 -0700: Opening track 2009-08-23 15:52:31 -0700: Writing track 2009-08-23 16:11:26 -0700: Finishing burn 2009-08-23 16:12:26 -0700: Closing session 2009-08-23 16:12:28 -0700: Finishing burn 2009-08-23 16:14:05 -0700: Burn failed 2009-08-23 16:14:05 -0700: The device failed to respond properly, unable to recover or retry. 2009-08-23 16:14:16 -0700: Unable to burn �Mac OS X Install DVD.dmg�. (The device failed to respond properly, unable to recover or retry.) 2009-08-23 16:21:59 -0700: Attach Image �Mac OS X Install DVD.dmg� 2009-08-23 16:21:59 -0700: Initializing� 2009-08-23 16:22:00 -0700: Verifying� 2009-08-23 16:22:00 -0700: Verification completed� 2009-08-23 16:22:00 -0700: expected CRC32 $0F91EA17 2009-08-23 16:22:00 -0700: Attaching� 2009-08-23 16:22:00 -0700: Checking volumes� 2009-08-23 16:22:01 -0700: Operation canceled by user. 2009-08-23 16:22:02 -0700: Volume check completed� 2009-08-23 16:22:02 -0700: Mounting� 2009-08-23 16:22:02 -0700: Finishing� 2009-08-23 16:22:03 -0700: Finishing� 2009-08-23 16:22:03 -0700: Image �Mac OS X Install DVD.dmg� attached successfully. **********
Here is from ~/Library/Logs/DiscRecording.log
Quote:
Disk Utility: Burn started, Sun Aug 23 14:57:02 2009 Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI. Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x. Disk Utility: Burn failed, Sun Aug 23 15:19:01 2009 Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry. Disk Utility: Burn started, Sun Aug 23 15:51:02 2009 Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI. Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x. Disk Utility: Burn failed, Sun Aug 23 16:13:34 2009 Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.