I find it hard to believe that I've misplaced one installation disc but it would appear that I have misplaced two.
Is there a place I can download and burn a disc.
MacBook
FC240LL/A
running the latest OS
I just got my MBA, it is my first Mac. I left my disc at my house and need to download the remote disc onto a vista based pc. Is there any where i can go and download the software i need?
View 3 Replies View RelatedI don't have my install cds anymore, but I do have my leopard retail disc, so can that take the place of my install discs?
View 7 Replies View RelatedI am curious if I can burn a DVD using remote disc or if I need to buy the external drive.
Info:
MacBook Air, Mac OS X (10.7.3)
Created iDVD with slideshow and music on my 5 yr old MBP.Tried to burn it to a Staples -R DVD disc.It appears to be burning for about 35 minutes, then with one minute left, it stops and ejects the disc.No error message. I saved the file as a Disc Image and was able to view it with the DVD player on my MBP.However, when I went to burn it to the disc, I got this message:"The disc can't be burned, because the device failed to calibrate the laser power level for this media."
View 4 Replies View RelatedNew to Safari. I originally moved the download file off of Dock, but now would like to put back. I found it in Finder and was able to place it on the desktop, but am unable to put it on the Dock.
View 12 Replies View Relatedhow do you burn a disc on macbook pro 10.7 Lion OS?
Info:MacBookPro, Mac OS X (10.7.4)
I tried to burn 1.4GB of data on a 4.7GB blank DVD using Finder but got an error message saying "file is too large to fit on the disc. Remove some files an try again". I'm on Mac OS X 10.6.8.Â
Info:
iMac, Mac OS X (10.6.7)
I need to burn a data disc of an iMovie '11 project created on a MacBook, OS X, version 10.6.8, and be able to email the file.
View 4 Replies View RelatedWhenever I burn pictures to a disc for some reason they duplicate. There will be two, three, four and sometimes even five copies of each picture or folder of pictures. What can I do to prevent this from happening. I would like to burn only one copy of each picture on the disc.
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.2)
Went to Best Buy today to buy a full version of windows to load on my mac ... I was surprised by the full version price so I didn't buy it.I see eBay has lot's for sale, does anyone know any other places I can buy and maybe download windows for a half decent price?
View 4 Replies View RelatedI've got a couple cool icons but I'm looking for more. Is there any really good packs with many icons or a good site that I can download icons from?
How do I burn pictures to a disc for a windows user to view?
Info:iPad 2
Im using a 17" unibody macbookpro 2.66 early 09 to make a copy of my Leopard Disc to put in an offsite storage location.
Im able to rip movies and burn movies (DVD-R, DVD-RW, DVD-DL), iMovie videos, iTunes cds, rip audio discs, etc.
The media is Dual-Layer DVD-R in disk utility
I burn it at the slowest possible speed (on both systems) at 2.4x
After it writes the data to the disc and finishes, i get this lovely image:
I tried doing a test install of it from the burned dvd and it installed fine.... = what the huh!?
its done this twice.
using the same media on a 15" 2.2ghz uMBP late 2008 gives me a completed successfully notification every-time.
burn info:
17" Superdrive info:
HL-DT-ST DVDRW GS21N:
Model: HL-DT-ST DVDRW GS21N
Revision: SA17
Serial Number: KZZ91OM5217
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
15" Superdrive info:
MATSHITADVD-R UJ-868:
Model: MATSHITADVD-R UJ-868
Revision: KA14
Serial Number: dE0E4283
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
Log Files from the 17" uMBP
Here are the Disk Utility Logs
Quote:
2009-08-23 15:19:30 -0700:
2009-08-23 15:50:48 -0700: Eject of �disk2s3� succeeded
2009-08-23 15:50:51 -0700: Burning Image �Mac OS X Install DVD.dmg�
2009-08-23 15:51:02 -0700: Image name: �Mac OS X Install DVD.dmg�
2009-08-23 15:51:02 -0700: Burn disc in: �HL-DT-ST DVDRW GS21N�
2009-08-23 15:51:02 -0700: Erase disc before burning: No
2009-08-23 15:51:02 -0700: Leave disc appendable: No
2009-08-23 15:51:02 -0700: Verify burned data after burning: Yes
2009-08-23 15:51:02 -0700: Eject disc after burning
2009-08-23 15:51:02 -0700:
2009-08-23 15:51:02 -0700: expected CRC32 $0F91EA17
2009-08-23 15:51:02 -0700: Preparing data for burn
2009-08-23 15:52:25 -0700: Opening session
2009-08-23 15:52:31 -0700: Opening track
2009-08-23 15:52:31 -0700: Writing track
2009-08-23 16:11:26 -0700: Finishing burn
2009-08-23 16:12:26 -0700: Closing session
2009-08-23 16:12:28 -0700: Finishing burn
2009-08-23 16:14:05 -0700: Burn failed
2009-08-23 16:14:05 -0700: The device failed to respond properly, unable to recover or retry.
2009-08-23 16:14:16 -0700: Unable to burn �Mac OS X Install DVD.dmg�. (The device failed to respond properly, unable to recover or retry.)
2009-08-23 16:21:59 -0700: Attach Image �Mac OS X Install DVD.dmg�
2009-08-23 16:21:59 -0700: Initializing�
2009-08-23 16:22:00 -0700: Verifying�
2009-08-23 16:22:00 -0700: Verification completed�
2009-08-23 16:22:00 -0700: expected CRC32 $0F91EA17
2009-08-23 16:22:00 -0700: Attaching�
2009-08-23 16:22:00 -0700: Checking volumes�
2009-08-23 16:22:01 -0700: Operation canceled by user.
2009-08-23 16:22:02 -0700: Volume check completed�
2009-08-23 16:22:02 -0700: Mounting�
2009-08-23 16:22:02 -0700: Finishing�
2009-08-23 16:22:03 -0700: Finishing�
2009-08-23 16:22:03 -0700: Image �Mac OS X Install DVD.dmg� attached successfully.
**********
Here is from ~/Library/Logs/DiscRecording.log
Quote:
Disk Utility: Burn started, Sun Aug 23 14:57:02 2009
Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI.
Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Sun Aug 23 15:19:01 2009
Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Disk Utility: Burn started, Sun Aug 23 15:51:02 2009
Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI.
Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Sun Aug 23 16:13:34 2009
Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
My friend ripped a CD via EAC into FLAC files, so that I could then burn a CD-R copy. I've done this multiple times without issue. However, with this current rip, the total file size is 708MB and does not fit on a regular CD-R disc. I'm a bit confused because all the files were ripped from a single Red Book CD. Is there anything I can do to reduce the total file size so that it fits on a CD-R disc (without removing one of the files)?
View 1 Replies View RelatedI'm trying to burn photos to disc but get message there is not enough memory to do so. I have deleted all extra photos and movies and files possible but message continues. Is there something I can look at on the Pro to see where all the memory is being used?
View 8 Replies View RelatedI recently burned a project to DVD. It's a data disc, and seems to have worked fine, about 1.2 GB of the four available on the DVD-R I burned with a Superdrive on my G4 desktop.
I told it to write session in Toast 7 Titanium, but when i try to burn something else to the disc, Toast rejects it. With DVD's, can you only burn one data disc? No multiple sessions? It's okay if this is the case, I just want to know.
I am having trouble burning a disc of a slide show to be used on a windows PC. I haves managed to burn one which operates ok on the mac but cannot fathom out how to do one for a PC
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
When trying to burn a DVD via Finder, I get an error message of 'error code:- 0x8002006E and the disc wont burn. One time the disc wouldn't eject but I finally manged to do this via Disc Utilities. I have also tried to burn the DVD through Disc Utilities but it seems to get stuck when trying to create a new disk .dmg file.I recently had to have a new graphics card installed, and have had a few problems since with sleep and mounting external drives. Could this be connected?Â
Model Name:Â Â Â Power Mac G5
Model Identifier:Â Â Â PowerMac7,3
Processor Name:Â Â Â PowerPC G5Â (3.0)
Processor Speed:Â Â Â 2.5 GHz
[code]....
when you are in a playlist in iTunes and hit the burn button, does it burn an MP3 disc, or a standard audio disc that I can use in a car stereo?
View 2 Replies View RelatedI set up iDVD to burn a disc of my movie; it did so just fine. I saved the set up, then tried to reburn additional DVDs. It opened ok, but refused to burn anything-when it got to the "Burn" stage, it would display "recording finished" then lock up.
Are there some preferences I can trash on this, or what?
I create my own music and sometimes people ask if they can have it on a CD. Since I really do not want people to be able to rip it to their computer's I have denied these requests. However as the demand apparently grows and more people start asking I feel that I would really want to be able to share my music with them, securely. What I would like to do is burn a cd containing my music that people cant rip. I know there will always be some way of doing it, but fore the average computer user preventing mediaplayer/itunes from being able to rip the music will be enough to keep them from doing it.
View 16 Replies View RelatedAll I have is iPhoto's for an app., can you burn a disc with a slideshow and music playing like you do on iPhoto's ?
View 1 Replies View RelatedI have the 10.4 install discs copied to my computer and i am currently running 10.3, I need to make a boot disk from the 10.4 files so I can install 10.4 on my computer
View 1 Replies View RelatedI think I have tried everything?? I still can not burn my playlist to a disc. I have tried different burn speeds, different brands of disc's etc.
Info:
iMac, OS X Mavericks (10.9.2)
How can I download Lion software to a disc?
Info:
MacBook Pro
I can no longer burn CDs - "may be incompatible with this disc burner, try a slower speed, try another make of disc" Tried that, still doesn't work.
Info:
Mac mini (Early 2009)
How do you burn to disc a video you received in mail?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I've tried six times to burn 290 photos, exported from iPhoto, to a RW DVD. The pictures export OK, the transfer to the DVD seems to go OK but it's when the disc is being verified that the problem occurs. It gets to somewhere around 25% verified then returns the message below and ejects the disc.
I only seem to have two burn settings:Â Max (2.4x) and 2.4x - I've tried both and failed.
As a test, I sent a mere 10 photos to a disc and that worked. Then I tried 100 to a new disc and it failed again. But the discs' capacity is 4.6 Gb.
In the past I've successfully burned several hundred photos onto many discs from the same manufacturer.
I'm not sure what's going on. Is it possible that the disc burner on my iMac is broken.
Info:
iMac, Mac OS X (10.6.8)
I think my superdrive died in my dual-core PM G5. This is what it's doing: I'll insert a DVD and it'll sit for a few seconds, then eject it. It DOES show up in my system profiler though. Is it dead, or is this a software problem? Oh- I should mention that the last thing I did was use Visual Hub to burn an AVI to a DVD. That worked fine. Afterward- nothing. I'm running OS 10.4.9. Help!
View 4 Replies View Related