I want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
View 8 RepliesI'd like to create a bootable Snow Leopard Flash Drive, after upgrading to Lion. I have multiple Macs with some expensive legacy software and an Apple USB modem (32 bit) I use out in rural areas. I'm assuming this will be a viable solution
View 2 Replies View RelatedSo my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
I created a bootable usb drive on a windows pc using windows 7 to install windows 8 preview and want to make a copy to install in virtualbox on my imac and burn to a dvd that will work on pc.
I've tried using disk utility to create an image and get a file ESD-USB.dmg, but virtualbox won't boot a dmg file.
I tried converting it in the terminal with:
hdiutil convert -format UDRO -o windows8.iso ESD-USB.dmg
but the resulting file was windows8.iso.dmg. I changed the name to windows8.iso, but even so, virtualbox complains it's unbootable.
I tried the terminal command:
dd if=/dev/disk4 of=windows8.iso
but virtualbox complained that it's not bootable.
I tried the terminal command:
cat /dev/disk4 > windows8.iso
but virtualbox complained that it's not bootable.
Info:
iMac, Mac OS X (10.7.4)
I'm thinking of creating a small, emergency boot drive on an sd card and would like your thoughts on what kind of software would be useful to put on it? So far the only things that come to mind are the Mac disc utility and carbon copy cloner.
View 2 Replies View RelatedI am running Leopard on a 1st gen macbook. I used boot camp assistant to partition the disk, and then went to install windows. I didn't back up bc I am an ass. Then I got to the part where I had to choose a partition. I reformatted the Boot Camp partition to NTFS. I then realized that the partition is too small. I have to get back into Leopard to fix the partition problem. Now, I can't reboot to Leopard. Holding alt or the apple key or both does not prevent the windows dvd from booting. When I eject the DVD, it tells me "no bootable disk." I never installed Vista. I don't understand how I could have overwritten anything or caused any data loss.
View 11 Replies View RelatedI have an external drive hooked up to an eMac. The plan is to install 10.5 on the drive, and then put the drive into a G4 powerbook. I booted the eMac from the 10.5 retail install disk, partitioned the external drive into 1 partition, with the 'Apple Partition Map' option selected in the options. But when I go to try to install onto the disk, it has a red X and says that the computer can not boot off of the device so it refuses to install.
View 6 Replies View RelatedI'm trying to restore the OS onto my netbook and there's a tool that is supposed to be able to automatically mount a restore image onto a flash drive. Thing is, every time I try it, it only allows me to select drive bays without discs in them, so it's sort of worthless as you cannot begin the download without selecting a valid drive.
I found the direct download that the program so I have the .img file now but I need to place it onto the flash drive in order to install the OS. In the past I've just dragged the content files after mounting them in Finder over to a formatted disk but this is now consistently producing a blank boot on the netbook. Is there a command in Terminal or an option in disk utility that I am not seeing to mount the image rather than copying the files? I'm thinking that it's missing something by simply copying the files.
I'm trying to install windows 7 on my macbook, i couldn't put the iso disk image on a dvd because my macbook will not read a bank dvd (that's a separate problem)So i was wondering if there was a way to "burn" the iso file on a flash drive and boot it up from through when I'm on Boot camp assistant.
View 1 Replies View RelatedAfter Lion's release last summer, I downloaded it and made a bootable Lion flash drive, which works great. Now, I want to burn Lion from the flash drive to a DVD. On the flash drive, when I open Contents of "Install Mac OS X Lion.app," I do not see a Shared Support folder. Can I make a bootable DVD from my bootable Lion USB flash drive?
View 11 Replies View RelatedSo i put the OSX disk in (10.3) and when i make it boot from the disk the mac logo pops up then it shifts a quarter inch to the right and freezes. I then tried booting it normally and pressed the install button now it boots off the CD automatically with the same result and can't be turned off. Is there an emergency disk remove thing for a powerbook G4? And is there a way to reformat my computer without the disk?
View 1 Replies View RelatedI always get this error when I try to boot up to my Windows on Bootcamp: No bootable device -- insert boot disk and press any key
I installed Windows 7 through Bootcamp and I got everything installed perfectly!
I partitioned my Mac's hard drive into 3 before the Windows installation:
-Mac OS
-Data For Windows
-System for Windows itself
It all worked fine and i could drag and drop anything into that Data Hard drive through Windows very easily. However, when I came back to my Mac OS and partitioned my Mac Hard Drive into 2 parts(Which makes 4 partition now) and tried booting back up to my Windows, it gave me that error. I then decided to re-partition it like before which was Mac, Data and Windows. Booted it back to Windows and it gives me the same error again. I have an attached Picture showing how my partitions look now. Does anyone know how to fix it? I think it's because what my Windows is booting from is the Data Hard Drive but not my Windows 7 Hard Drive with the OS on it. Is there a way to change it's place or to tell it which Hard Drive to boot from?
I am getting " No bootable device insert boot disk and press any key".
Info:
MacBook Pro (13-inch Mid 2010)
I have a mac mini. I used boot camp Assistant to install windows 7, and to make the partition screen stayed black and I get the following poster: "no bootable device- insert boot disk and press any key".
Info:
Windows 7, ipod 5º generation
I have a Macbook pro and when I turn on the computer the message: "NO bootable devices, insert a boot disk and press any key" appears. I click the button "alt" and I choose the option Macintosh HD and the computer works. But I can't do this procedure always. This problem started after install the Paragon software to save my files on the external hd. How can I fix that?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Not only will holding Option while booting not work, but all of the other boot tricks (safe mode, single user mode, etc), will not work. I am at a loss. I also don't have an optical drive in this particular MBP. I have an SSD where it once was.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have an usb flash drive backup for os snow leopard but I want to restore it for normal use, it can be done?
Info:
a1384 usb recovery, Mac OS X (10.6)
I ran verify disk, and was told I need to repair disk... I try to boot from my OSX snow leopard disk buy holding down C at reboot, but I get nothing... I hear it go to the disk, but then I just hear clicking and noise from dVD. I can boot normal, but I can't boot from safe mode or DVD? What can I do?
View 4 Replies View RelatedI have a Macbook Pro 17" with 10.6.8 installed but won't bootup. It stays on the logo and spinning gear screen and won't proceed from there. I have tried to reboot from a Snow Leopard install disk but it won't recognize it and haven't been able to startup from another computer using firewire connection.
Info:
MacBook Pro, Mac OS X (10.6.8), stays on logo and rotating gear
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
Why can't I get my MacBook to recognize my flash drive? When in word or pages, I will go to file to "open" and my flash drive is not listed.
Info:
MacBook Pro
I've been trying to do a simple task - but the mac won't have it.I want to change the icons on my flash drives, using Cmd-I, then copy and paste the icon (purchased from mac), but all that comes up on the drive is a 'png' file pic.
View 4 Replies View RelatedMy hard drive recently crashed. I just bought a new one and installed it myself. Now it's simply a matter of reinstalling the operating system, which is where I'm having trouble. I insert the Snow Leopard Install DVD into the drive. I power on the computer and hold 'C' (I've tried Option too) to boot from the disc, but it doesn't work. It spits out the disc after a few seconds, whether I hold 'C' or not, and then it gives me a folder icon with a question mark in it in the center of the screen, the same thing it showed when my hard drive first crashed.
Info:
MacBook, Mac OS X (10.5.8)
I just purchased a LaCie triple interface (500GB disk to use as a bootable external drive to support our family's family of mac's, all running 10.6.8 including a 2006 Core Duo iMac, a 2007 Core2Duo iMac, a Core2Duo Mini, and a 2010 MacBook Pro.
The firewire drive does not appear as a bootable option on any of the computers, attached to either of the iMacs via the Firewire 400 port (through a 400 to 800 adaptor), or attached via the Firewire 800 port on the MBP. This is the profile of the LaCie via System Profiler on the iMac?
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Rugged FW USB3:
Manufacturer: LaCie
[code]....
I have no recovery disk at boot since I upgraded from Snow Leopard through app store?
Info:
80 iMacs 30 MacBook Pro's 40 iTouch, Mac OS X (10.7.4)
Does anyone know if it is possible to create a disk image of the boot drive? I have tried / boot from DVD, then go to Disk Utility, file/ create new image from disk but the process stops imediatlly with a. cant unmount drive, b. drive is busy, c. in use how the drive is in use is not sensable, as it should be as 'just a drive' This is on a laptop with OSX 10.5.8 / 32gig hd, 2 gig ram, just in case it matters. I thought about timemachine, but the laptop sometimes requires a complete reinstall, that is a long process, install + upgrade + redo all the other programs +
Info:
G5 2x1.8 / G4 1.6, Mac OS X (10.5.8), G5 2x1.8 , G4 1.6 ghz, 2 gig, Beige G3 G4-1ghz OS9
I copied some image files from a flash drive (jpeg format). When I go to view in folder they appear to not be there. When I try to copy again, msg says something like cannot change invisible file. what can i do to make these image files visible?
Info:
iMac, Mac OS X (10.6.5)
I have copied some image files (jpeg format) from a flash drive onto my imac. When I go to view the images they do not appear. When I try to copy them again, there is a message that I cannot modify invisible images. These images were originally downloaded to a windows-based computer and copied to the flash drive. Is there a way to make these image files visible? I am trying to use them for a website.
Info:
iMac, Mac OS X (10.6.5)
Is it possible to create a bootable disk image of my hard drive onto an extrenal firewire hard drive?
View 1 Replies View RelatedI have a 1Ghz PowerPC G4 iMac and want to delete everything and start again with Leopard. (it seems to be within the system reqs.) Problem is the DVD drive isn't functioning properly. It sees the OSX DVD but won't boot from it. Question - What's the best alternative method? Create a boot firewire disk?
View 1 Replies View Related