OS X V10.5 Leopard :: Partitioned Drive With "Apple Partition Map" But Installer Says That The Disk Is Not Bootable
Feb 29, 2012
I have an external drive hooked up to an eMac. The plan is to install 10.5 on the drive, and then put the drive into a G4 powerbook. I booted the eMac from the 10.5 retail install disk, partitioned the external drive into 1 partition, with the 'Apple Partition Map' option selected in the options. But when I go to try to install onto the disk, it has a red X and says that the computer can not boot off of the device so it refuses to install.
I want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
As soon as I start the Bootcamp assistant I get this message on the screen that asks for download of the windows support files - ie right at the start.The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.
I got all the way to where it says, please select which HD you want to install vista on, and i picked the one that said Bootcamp, which I earlier partitioned, but it said it wasn't NTFS. How do I make it NTFS? I thought it would automatically do it.
I have a PPC iBook G4 with 1.3 Ghz and 1 GB SDRAM that I bought new in 2006. I've never had a single problem with the machine, but it doesn't have a superdrive and the OS Tiger capabilities are limiting.
Last year I upgraded to Leopard with a .dmg via FW external drive and loved the interface, but with only a 40GB HD I deleted any app I didn't need. Over the summer I bought a new iMac, but I still need the laptop whenever I'm away from my desk. I tried erasing and reinstalling now that I don't have to keep much data on the drive...interested in getting back those non-essential apps. I've done it before with the exact same resources, but this time it's not working. I'm hoping someone out there can tell me what step I'm forgetting.
Here's what I've done:
1. Connected iBook to iMac in target mode via FW and erased/partitioned HD in Apple Partition Format.
2. Reinstalled Tiger on iBook from original disc.
3. Connected iBook to external drive via FW and restored .dmg to smaller partition on iBook.
4. Opened .cdr on smaller partition, saw the Leopard disc image, set the Leopard install disc as the startup disc in System Preferences. Hit restart button in System Preferences and got the little "not happeneing" noise.
5. Went to desktop and opened the Leopard installer disk image and pressed the install/restart button there. Reboot was slow and dark at first, but ultimately booted Tiger.
6. Went back to System Preferences, selected Leopard install disc as the startup disc again, locked the selection and restarted...booted Tiger again.
7. Tried these tactics again while holding option key and then S key at restart, but the second partition with the installer was never recognized. Tried from Safe Mode, only booted Tiger.
8. Then I tried connecting the external drive again and opened the .dmg, then .cdr from there. Again System Preferences recognized the installer, but it would not boot with the same variables as before.
9. I connected the iBook to the iMac in target disc mode again and ran disc utility, all good. Then I did same with external drive, all good. I made sure both drives and the install disc image were bootable. Tried the boot again from both, all bad.
10. I did a lot of reading on troubleshooting this process and thought it might be a permissions problem, that the installer was not executable. I did a terminal tutorial and managed to make the partitioned drive and disc image both owner enabled. Still the exact same results as when I started.
I created a bootable usb drive on a windows pc using windows 7 to install windows 8 preview and want to make a copy to install in virtualbox on my imac and burn to a dvd that will work on pc.
I've tried using disk utility to create an image and get a file ESD-USB.dmg, but virtualbox won't boot a dmg file.
Sounds like people are enjoying Snow Leopard. I would love to join them, but the installer can't see my system drive! Disk Utility doesn't see it either. The only possible issue is that my system drive is an SSD, but it would be impressive if Apple managed to make their OS incompatible with a drive with a perfectly standard interface. Anybody else managed to get Snow Leopard installed on an SSD, whether one that came with their system or one they installed themselves?
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Yesterday I bought the Leopard install disc and loaded it up. When I tried to install 10.5.6, the installer told me that I couldn't install that version on my hard drive. I assumed it was because I only had 1 gb free, so I quit the installer and restarted so that I could free up some space. That's when the problem began. The gray startup screen came on, but then the little circle icon just spun and spun for a few minutes, then the mac shut down. I looked up some solutions on another machine. I tried selecting a startup disc, zapping the pram, etc. No good.
I started in verbose mode and it said something about an invalid sibling pair, and the last command I saw was something like 'CPU end'. I ran the disc utility from the OS X system disc, and it was unable to verify the drive. So what the heck did the OS X installer do to my hard drive? Did it corrupt the catalog? I quit the installer, so it shouldn't have touched it. (The worst part is that my super duper smart update wasn't working properly, so I need to get the data off that hard drive or I lose 2 years of work).
I'd like to create a bootable Snow Leopard Flash Drive, after upgrading to Lion. I have multiple Macs with some expensive legacy software and an Apple USB modem (32 bit) I use out in rural areas. I'm assuming this will be a viable solution
I have just bought an iMac after being a die-hard PC user for many years and am just getting to know my way around.
My old NTFS hard drive (salavaged from my old PC and in an external hard drive caddy) has two partitions but when I plug it in to transfer my data, it only recognises one of the partitions? (unfortunately the smaller, less useful one. Of course.
I have a partitioned hard drive taking up space (30.9 GB's) on my computer, but when i try to run boot camp assistant to remove it, it refuses to open, saying it can't create a partition, nor restore a partitioned hard drive to the main hard drive.
I used the boot camp manager to make a windows partition, and I made it 80GB. Then I restarted the computer and the XP installer opened. When I select where to install XP, the only option is a 130GB Disc. Leopard is 150GB and XP is 80GB, so where did it find this drive? Disk Utility clearly shows 2 partitions, nothing else. I didn't select it obviously because I don't want to screw up Leopard, but what should I do? Should I just bring it to the Apple store and have them do it for me?
I am trying to install boot camp on my mac, but when i attempt to partition it, it says "Verification failed. This disk could not be partitioned. Use disk utility to repair this disk." So i go to disk utility, but it won't let me hit the repair disk button. I can only hit the verify disk permissions and repair disk permissions for the Macintosh HD.
I want to partition my hard drive so I can run BootCamp, and my PowerBook is giving me the following message: The Disk Cannot be Partitioned because Some Files Cannot be Moved. So I'm assuming I need to format the whole thing and then partition with BootCamp. Totally open to other ideas, but, assuming I move forward with that, is the best was to save user settings, current Applications, data stored on the drive, etc. to create a disk image on an external drive? I've done that, but I'm sort of unclear on what I do with the disk image after I've wiped the drive and partitioned it up.
I am trying to set up a windows partition using bootcamp in leopard but it tells me some files cannot be moved and it cannot create a partition. I verified and repaired permissions and tried again but still no go.
I have the latest 17" i7 macbook pro and installed windows 7 64 bit on 100 gb partition. Long story short, I decided to delete the partition for now and install another time. It deleted fine, but every time I turn the computer on, it will load and say " no bootable device" but if I turn on holding option, the mac partition shows up fine and loads normally when I click on it. I just need help completely getting rid of the partition. My Mac hd says 500gb capacity. So its not partitioned any more.
I am new to this mac community.. And just received my 27" i5.
I am trying to install Windows 7 via bootcamp. I opened Bootcamp Assistant, and when i click continue, i get this popup.
"The startup disk cannot be partitioned or restored to a single partition" The startup disk must be formatted as a single mac OS Extented volume or already partitioned by boot camp assistant for installing windows.
I click OK.. And same message reappears
I cannot go ahead.
I have my 1 TB Disk partitioned as follows
500GB for Mac - Which is Mac os Extended (Journaled)
408 GB for Movies - Which is Mac os Extended (Journaled)
91 GB for Windows - Which is Mac os Extended (Journaled)
I've been backing up my Powerbook G4 for a few months using Time Machine to an external firewire drive with two partitions; one for the backups, and a much larger one for all my music, video, pictures, etc. I got a new mac mini over the weekend and I want to format the Time Machine partition without erasing the one with all my other files so I can start backing up the Mini.
Some time ago, I partitioned my Bay 1 drive (640GB) to two partitions, of equal size. Now, I find that on the system 'disk' partition, there is a lot of space I don't really need, and could use in the other partition. I find that I can shrink the system partition, but can't expand the second partition to use the extra space.
Info: Mac Pro Quad-Core, Mac OS X (10.7), MacBook Pro 13", iPad,iPhone 4S
I have a MacBook Pro from the summer of 2008 that I wish to create a backup for. I partitioned the hard drive to have both an OSX Journaled Partition for 10.5 and an NTFS partition for Windows XP Pro SP3. I wish to create a bootable backup for this computer onto an external USB drive. (e.g. if I remove the internal hard drive, except for the speed difference, I should not notice a difference). How is this done? Most copying programs don't seem to make the NTFS partition bootable, and any mix-and-matching ends up making it go kaput. (I also wish to be able to copy this backup partition back onto an internal SATA drive should the original drive die.) Also, when I press alt at the EFI screen to select boot devices, none of the partitions on my external hard drive appear, even though I made an image of my Windows partition there, which should be bootable.
I ran Bootcamp Assistant and assigned 20 Gb of space to windows - leaving 115 Gb free. I had defragmented my harddrive using iDefrag and then I ran the partition. Afterwards I got the common error "The Disk Cannot be partitioned because some files cannot be moved. Backup the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume." Is there a simple way to fix this problem (I have looked on the web) without having to run disk utility and format the harddrive.
I'm trying to create a partition for Windows, but I'm getting the message "disk cannot be partitioned because some files cannot be moved." A poster in another thread concerning this problem said that to create a partition, Bootcamp needs continuous space or something. I do have many large files, and I had up to 3 GB free out of 180 a few minutes ago until I deleted some files to get about 58 GB. I tried partitioning with 45 GB and got the error message. I also tried lower numbers, but nothing worked. I'm assuming it's because my files are fragmented. Then I looked up defragment in the forums and found that many people are against it whether it's because it "slows down the computer" or "it is unnecessary." Now I'm in a bind because I don't want to reinstall my OS, but now I'm hearing I shouldn't defrag either.
I'm trying to re-partition (i removed the first one so i could make it bigger). When i try and make a 100gb partition through bootcamp, after working for an hour, it says this:
Quote:
The disk cannot be partitioned because some files can not be moved.
Back up the disk and use Disk Utility to format it as a single Mac OS X Extended (Journal) volume. Restore your information to the disc and try using Boot Camp Assistant again.
What does this mean and how do i do this? I opened disk utility and can't work it out.
I just recently bought my first macbook pro. I had a 500 GB WD elite passport drive. I partitioned it to Mac os extended (journaled)- for time machine and FAT for windows and mac file transfer and storage. I used disk utility to partition the drive. These two drives are detected in my mac, however when I plug in the external drive into my windows- no pop up appears telling me to open files. So I go into my computer and click on the (F) drive in my case. Windows vista then proceeds to tell me the drive must be formatted before it can be used. What problem do I have. All I want is 2 partitions one for time machine and another that will allow for data transfer and storage. I have looked but cannot seem to find and answer. I have a 160 gb hard drive, what amount of space do you recommend for the time machine partition.
