I ran verify disk, and was told I need to repair disk... I try to boot from my OSX snow leopard disk buy holding down C at reboot, but I get nothing... I hear it go to the disk, but then I just hear clicking and noise from dVD. I can boot normal, but I can't boot from safe mode or DVD? What can I do?
View 4 RepliesI have a Macbook Pro 17" with 10.6.8 installed but won't bootup. It stays on the logo and spinning gear screen and won't proceed from there. I have tried to reboot from a Snow Leopard install disk but it won't recognize it and haven't been able to startup from another computer using firewire connection.
Info:
MacBook Pro, Mac OS X (10.6.8), stays on logo and rotating gear
My hard drive recently crashed. I just bought a new one and installed it myself. Now it's simply a matter of reinstalling the operating system, which is where I'm having trouble. I insert the Snow Leopard Install DVD into the drive. I power on the computer and hold 'C' (I've tried Option too) to boot from the disc, but it doesn't work. It spits out the disc after a few seconds, whether I hold 'C' or not, and then it gives me a folder icon with a question mark in it in the center of the screen, the same thing it showed when my hard drive first crashed.
Info:
MacBook, Mac OS X (10.5.8)
I just purchased a LaCie triple interface (500GB disk to use as a bootable external drive to support our family's family of mac's, all running 10.6.8 including a 2006 Core Duo iMac, a 2007 Core2Duo iMac, a Core2Duo Mini, and a 2010 MacBook Pro.Â
The firewire drive does not appear as a bootable option on any of the computers, attached to either of the iMacs via the Firewire 400 port (through a 400 to 800 adaptor), or attached via the Firewire 800 port on the MBP. This is the profile of the LaCie via System Profiler on the iMac?
FireWire Bus:Â Â
Maximum Speed:         Up to 400 Mb/sec Â
Rugged FW USB3:Â Â
Manufacturer:Â Â Â Â Â Â Â Â Â LaCie
[code]....
I have no recovery disk at boot since I upgraded from Snow Leopard through app store?
Info:
80 iMacs 30 MacBook Pro's 40 iTouch, Mac OS X (10.7.4)
I want to create a minimal recovery boot disk for SL. I've followed how-to's on creating one for 10.4 and 10.5, but so far it I couldn't get it to work with 10.6. If you have successfully done this, or can point me to a pre-made image or how-to.
View 8 Replies View RelatedI have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies View RelatedI am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdriveÂ
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
I have a tower Mac Pro with Snow Leopard running on it.Unfortunately one of the software that I use doesn't have yet a Snow Leopard update. So I am thinking maybe I can install older version of Leopard on one of the internal drives (i have 3 additional internal drives), so I can boot my computer from either Leopard or Snow Leopard, depending on needs (i don't want to get rid of Snow Leopard).
I never installed OS X system before, so I am a bit scared.The internal drive is ready, I have the old Leopard on disks, what are the next steps to take?
On my new MBP, I had Tiger and Boot Camp 1.4 Beta.
When I got my Leopard UTD disc, I simply did an upgrade. Last night, I was fed up with some of the weirdness, and decided to start with a clean slate.
I removed my windows/boot camp partition, popped in my Leopard disc, selected erase and Install, and within 30 minutes it was done (seems way too fast...wtf?)
Anyway, I go through the Boot Camp steps to install Windows. When I get to the Windows setup where you select a drive to install, it doesn't give me the option to format the Boot Camp C: drive, but instead just installs.
After rebooting, it gives me a DISK ERROR.
A bit of googling shows others have had this problem, too. Is EVERYONE having this problem? Did Apple break Boot Camp with Leopard?
Is there any viable workout other than formatting to Tiger, installing 1.4, then upgrading again?
Is it possible to uninstall the Boot Camp assistant on Leopard and find/download/install Boot Camp 1.4 on Leopard, and go from there?
I need windows for school - and this is driving me nuts!
Does anyone know if it is possible to create a disk image of the boot drive? I have tried / boot from DVD, then go to Disk Utility, file/ create new image from disk but the process stops imediatlly with a. cant unmount drive, b. drive is busy, c. in use how the drive is in use is not sensable, as it should be as 'just a drive' This is on a laptop with OSX 10.5.8 / 32gig hd, 2 gig ram, just in case it matters. I thought about timemachine, but the laptop sometimes requires a complete reinstall, that is a long process, install + upgrade + redo all the other programs + Â
Info:
G5 2x1.8 / G4 1.6, Mac OS X (10.5.8), G5 2x1.8 , G4 1.6 ghz, 2 gig, Beige G3 G4-1ghz OS9
I have a bit of a problem: I cant access my Mac because I lost the password. I recently changed my passwords on several macs, including an old PPC PowerMac G5 from ca 2005. I run 10.5.8 on this and it works flawlessly. I need to use this machine for important work. Â
So this is what I have tried so far:Â
1) Tested with all known passwords I have used in the past.
2) Tried to boot from a 10.6 install DVD
3) Tried to boot from just C and later Command C
4) Tried a different install DVD 10.4Â (I dont have the original 10.5 DVD)
5) Tried to use T and Target Disk Mode from an iMac with Lion. (disconnected all other FW disks etc.)
6) Tried different Firewire cables
7) Tried different Firewire connections.Â
It starts obediently and show every sign of Mac-Happiness. But I simply can't get the darn thing to boot. I think it normally should have booted using 10.6? Â
My mac pro won't boot from Snow Leopard DVD. When try, Starting with the Apple screen and the spinning ball. Normal. But after 2 min. The ball stops to spin and the Computer is Freezing.
Info:
Mac Pro
Just picked up a 3.2 8 core. How do i boot 64bit mode?Â
View 4 Replies View RelatedI need your help diagnosing this early 2007 Macbook Pro running the latest version of Snow Leopard. It isn't mine, rather my sister's, so I don't know the full details of everything as I don't see her all the time. Last December, I swapped in my 160gb 5400RPM SATA drive from my late 2006 MBP into her MBP as I had just bought and installed a 500gb 7200RPM drive into my MBP. I installed a fresh copy of Snow Leopard onto her machine, patched it up, and sent her on her way.
A few weeks ago, she came to me saying she was having trouble booting into OS X and was just having trouble using her laptop in general. The hard drive wasn't making any erratic noises, so I figured the system install had corrupted itself. The problem was I wasn't able to boot to the Snow Leopard DVD. The DVD would show up at boot when holding down the Option key to show boot devices, but when clicked, it would show the Apple logo, then the "prohibitory" symbol and the fans would spin up on full blast, with no further progress.
Booting into Single User mode, I was able to run disk repair and after running it over a few times, I was told the drive was without errors, the laptop booted fine (minus the booting to Snow Leopard DVD) and I gave the MBP back to her.
Fast forward to today, she's having issues booting in to OS X again. It'll show the Apple boot logo, but the small spinning circle will freeze, and the whole laptop will come to a halt. I still can't boot to the DVD either, with the same symptoms as above. I'm sure I can boot into Single User mode, run Disk Repair, and probably be good, but I want to attack this issue at the source.
Is the hard drive I've got in her MBP going bad (I can't hear any of the erratic noises you hear when you know a drive is going bad)? What else could it be? What about the inability to boot to the Snow Leopard DVD? What is the problem and how can I fix it? Thanks, and sorry for the long winded post.
I've seen something about com.apple.boot.plist, but I need a little more further information. After type: Code:
ioreg -p IODeviceTree -w0 -l | grep firmware-abi
I receive the following from terminal:
Code:
|| "firmware-abi" = <"EFI64">
Looks that I am able to run 64-bit kernel.
My computer is a white macbook early 2008. Core 2 Duo T8300 2.4GHz.
Brought snow Leopard from Apple, and got it yesterday. I installed it today, and whilst it seems faster I have a few problems. Mainly that it doesn't seem to boot into 64-bit mode, neither from an app changing it to boot into 64 bit or by pressing the 6 and 4 keys down.
Also, does anyone know why a plugin to make Quicklook have a list view for Folders won't work anymore?
I installed Snow Leopard last night and since, I have been trying to boot it into 64-bit mode. I have tried holding down the "6" and "4" keys at startup, but that did not work.
Late 2008 2.4GHz Aluminum MacBook
I set up windows xp on my imac using boot camp and then used the snow leopard disc to install drivers etc. I then tried to install a game (GTA IV) but setup.exe immediately crashed to desktop. I tried with another game (Fallout 3), same thing. Today I tried re-installing xp without installing the drivers etc from the snow leopard disc. This time, both games installed fine. But without the extras from the snow leopard disc, I can't play them.
View 7 Replies View RelatedI ran the 'Software Update' on her machine and it had several (6+) updates including the updates for the EFI bootloader; I clicked 'Okay' to reboot and apply the updates and after the 'chime' the machine hangs in the 'grey-screen' with the Apple logo and a progress indicator. After a period of a few minutes it appears the machine turns itself off (or at least the screen goes dark)
[code]...
Also understand that my wife doesn't have Applejack, DiskWarrior, or any other type of utilities installed, *sigh* nor does she know where her installation disks are... so I think I may be at a loss until I can get the machine to the local Applestore and schedule a time?
I want to reformat my hdd and split it on few partitions but i get following problems
- Disk utility doesn't allow to split it, i check it in single user mode, nothing works
- Doesn't want to boot, I tried to boot it from external hdd, usb, cd, dvd, nothing works, I just see Grey apple and that's it,nothing happends
I left it even like that for whole night and nothing happened..I did scan disk, check blocks etc. no errors :/ it give me some filesystem error (which i googled and it sayd you need to boot from different partition so it will work) c, cmd r, doesnt work..starting with opt key gives me list of devices but it freezes after My macbook pro is from mid 2010, 8 gb of ram (i did change it by myself, but works perfectly)The os snow leopard works perfectly, but I need to split the partition..Tried to reinstall os but it stops after restart (in middle of instalation) , it gives me grey apple and thats it.I don't have original dvd, lost it some time ago, can't get new one since I moved to middle of nowhere(no apple shops or anything)single user mode commands would be most helpful, id just format the hdd and split/reinstall the os from zero..Is there any chance to reformat/partition hdd from single user mode? or any software that I can boot from ?
Info:
MacBook Pro (17-inch Mid 2010), Mac OS X (10.6.8)
iMac will not reboot after reinstalling Snow Leopard. White screen and a folder icon with a "?" in the middle.
Info:
iMac, Mac OS X (10.6.8)
I have two older Macbooks that came with Leopard and I also have a newer Mac Mini and a new Macbook Pro that came with Snow Leopard. Is there a way I can use those disks to upgrade the older Macbooks to Snow Leopard or do I have to purchase a new copy?
View 2 Replies View RelatedMy girlfriend bought a new mac over the summer and is eligible for the UTD program. I am worried though that the UTD program may only be an upgrade for Leopard - and not the regular install disk - so if we ever had to do a complete reinstall (hey, you never know) we would be unable to do so. Does anyone know if the UTD & regular snow leopard disks contain the same bits? MD5 comparison might be helpful.
View 3 Replies View RelatedI have a 1Ghz PowerPC G4 iMac and want to delete everything and start again with Leopard. (it seems to be within the system reqs.) Problem is the DVD drive isn't functioning properly. It sees the OSX DVD but won't boot from it. Question - What's the best alternative method? Create a boot firewire disk?
View 1 Replies View RelatedI have two Macs that run Snow Leopard. Lion looks to be quite different and offer great new features, particularly the app store. So, can a Mac become dual boot like a Linux can? I mean, may I co-install Lion side by side with Snow leopard rather than overwrite it? I have successfully done this operation on a Linux Ubuntu netbook with two different versions of Ubuntu, and a Windows 7/Ubuntu netbook. But I've never tried this on a Mac. Does a Mac OSX install allow options for how the user will install the new OS?
View 3 Replies View Related