Does anyone know what the screw size is for the bottom case screws and the 2 hard drive bracket screws are?
I need to replace some
Anyone know where I can get these screws?
I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies View RelatedI was wanting to know how hard it is to change top and bottom case and keyboard area? I would like to know that if anything was to happen to my soon to have macbook I could change it. Also this on the older macbooks. And if I have Apple to change it how much would it cost? And yes I know that they should replace keyboard case area for free because of the defunct cracking issue.
View 3 Replies View RelatedI have a brand new 15" i7 Macbook Pro that I bought from the Apple store over 14 days ago. I opened it up to put in an SSD drive and optibay. Now, this was my first time opening up a unibody, but I've opened up many notebook computers and older style Macbook Pros before, so I'm not a newbie.
However, putting things back together I ran into a problem. One of the screws that secures the metal plate on the bottom of the machine will not catch in it's hole, and therefore does not stay in. I swear I did nothing to strip this screw or the hole it goes into. When I screw the screw into the hole with the case off, it smoothly sets and seems to be fine. However, when the metal plate is put on and the screw is put threw it, it's like the screw is not long enough to reach the threaded part of the hole
Yes, I'm positive it's the right screw. The hole I'm talking about is along the back side of the computer, towards the hinges, and is the only one of the 4 screws that is the shorter style screw (vs the long ones that occupy the other three holes).
I'm at a loss for what to do. I'm thinking about putting all the stock stuff in place and taking it into the apple store for help at this point.
I am new to macs. I just bought a used macbook air, and realized 3 screws were missing from the bottom, I called all the local repair shops, no one has screws for it. I would really like to get the screws. Longer ones by the fan I am more concerned about, where could I order them from without getting a while set for like $40? It is out of warranty so apple will not give me the screws.
View 3 Replies View RelatedI own a 15 inch late 2008 unibody MacBook Pro. I have recently discovered that one of the screws on the bottom of it is missing. I am not sure where I can buy some new screws for it. Does anyone have any insight into this?
View 2 Replies View RelatedI took off the back cover of my MBP (early 2009) and the screws will not go all the way down. I think they are stripped. Is there anyway to use a tap and die set to fix the threads? Has anyone had a problem like mine? I had to take the cover off to check my memory (that is a whole other post) but when I put the cover back on the little screws would not go in very far. The just stick out of the case and will not go in any further. I could "make" them go down, but I do not think that would be wise to force the screws into place, because they may not come back out if the laptop ever needs to be worked on again. does removing your back cover on a MBP void your warranty? I just had a genius tell me that becasue I took the back cover off I voided my warranty, but they are going to replace my memory
View 14 Replies View RelatedIt seems that i cannot open the bottom cover after getting all the screws off,
View 8 Replies View RelatedI slipped up a few times and caused hairline scratches on the underside plate of my 13" MBP when I installed my Momentus XT (which I am now returning and getting X25-M). My heart dropped when I heard these screeching noises, but it doesn't look too bad and hopefully eliminates the OCD I tend to have with electronics.
View 12 Replies View RelatedI was woundering if anyone know where i can buy some screws for the bottom of my macbook pro i7 15". I lost one screw when replacing HD and memory. Everywhere I see online wants to sell whole macbook pro screw sets. I only need 1 or maybe anther for a backup. Don't want to spend 50bucks on a set of screws just to use 1.
View 4 Replies View RelatedFirst off, I am very O.C.D when it comes to my electronics and I constantly worry about my stuff. Over the past month, I have been checking SMART status and benchmarking my hard drive at least once a day. I'm a little worried that my hard drive is dying... Yea, I'm crazy...Regardless of the above, I would like some answers to a few questions..First, how durable are the unibody lower case screws? Do they strip easily? If I purchase the correct size screw driver (phillips #00), what are my risks of damaging the screws, or possibly wearing them out prematurely?Second, how difficult is it to realign the lower case and not cause a "wobble." I have read some people incorrectly screwing in the bottom case and basically bending the lower case, causing the machine to wobble on a flat surface.After reading my manual, Apple clearly indicates that users are permitted to service the hard drive. I'm technologically savvy but my only worries are damaging my $2500 machine...
View 3 Replies View RelatedMy MBA is built to order.
On a flat glass table, only 3 feet touch the table. The bottom right is off. Anyone else have this problem?
how to clean the bottom case of macbook 13' unibody? is there some sort of specialized cleaning solution for it?
View 1 Replies View RelatedSo I bought a refurb nvidia White MacBook a couple weeks ago and one of the problems I have noticed is that the screen is not flush with the bottom case when closed. The problem is worse on the right side than the left (near the indicator light).
I know that with refurbs you risk getting a slightly less than perfect computer. However, I don't want this problem to get worse. When I first got it I didn't really care but now I'm thinking of the future and of the "what if it gets worse" scenario where I take it in and they think I physically damaged it by accident.
I have a mid 2009 macbook (nvidia 9400 version) and i have recently noticed that there is quite a lot of hairline cracks around the speakers on the bottom case, and the screen bezel has actually split at the bottom, and the last couple of weeks the screen has been creaking, i originally thought the creaking might be related to the cracks but it seems to be coming from the actual screen its self.
I know that apple repair out of warranty for cracks on the palm rest, but that area of my macbook is in perfect condition so i'm not sure where i stand here, how much would it cost to have all the casing replaced e.t.c do you think?
it's not really a long story, i have a macbook i got in feb. 2007 i paid 1299 for it, (not like it matters, but it's kinda why im annoyed lol) Well, i was carrying it today, and realized that the plastic by the vent i guess? it's on the bottom of the case near the back edge. so anyway, it is cracking, but not from outside it. it just runs straight across. Will apple help me even though I have no applecare? This seems like a manufacturer's defect to me, but i was hoping macrumors' collective knowledge would have a scenario or someone has been through this before. I'm getting pics ASAP!
View 6 Replies View RelatedI was hoping that Apple would address this in the new MBPs but alas it seems they are the same.I hate the fact that my 15 and 17 mbp bottom cases are too flexible and will actually pop in and out if you hold it in the middle.I think on my new mbp I did this and accidentally heard the fan hitting the case.To get around this, you must hold the mbp from sides only.
View 11 Replies View RelatedWhen I apply pressure on the bottom case of my MBP(underneath the trackpad), I hear a click. Is this normal? I am currently using the current MBP13'. What is under there? Am I damaging anything?
View 11 Replies View RelatedI am needing to replace the bottom case of my late 2006 MBP. It has a large dent in it that is causing some problems. My question is, do I need to get the exact part number listed on the bottom of my laptop (A1211) or can I get a bottom from any pre-unibody MBP i.e. A1260? Also, has anyone ever replaced this part? How difficult is it? I have experience working on laptops, I've just never taken a mac this much apart.
View 2 Replies View RelatedI have a late 2006 macbook and had the issue with the cracking case repaired today, however, Apple only repaired half of the issue. The 'top' half of the case was fixed (new keyboard, trackpad etc) was replaced and I am more than happy with it. The bottom half of the case (section with USB ports, bottom of the MacBook etc) still has cracks in it and clearly hasn't been replaced. Is this something that should be replaced as a manufacturing fault as they have done with the keyboard, palm rest, trackpad etc?
View 3 Replies View RelatedI have to replace the bottom case of my peryn 2.4ghz macbook pro. I was wondering if anyone bought from usedmac.com and if this model would fit my computer? I will just order this part and go to my apple university shop where a friend of mine works there as a techy and he can change the bottom case.
View 4 Replies View RelatedI would like to replace my 1st generation unibody MacBook Pro's bottom case and I am interested in knowing the price. Can I purchase and replace the bottom case at the local Apple Store (I'm in Sydney)? I'm in warranty, if that's a factor.
View 2 Replies View RelatedI went through all the steps to change the optical drive on an old 500 MHz iBook G3, but am unable to attach the bottom case. The problem is the two long (20mm) screws near the back of the computer -- each apparently has to insert into something that looks like a gold-colored nut with serrated edges, like gears, otherwise the screws just rotate in place and don't "lock up." I'll attach a picture, but my only digital camera until I borrow one from a friend is my cell phone, so the pic won't be too good. The gold pieces fell out during the disassembly process and I can't figure out where they now go.
View 4 Replies View RelatediTunes is huge, and when I try to resize it (Bottom right 'button'), the Dock shows up. I tried to hide the dock, move it to the left/right, and iTunes is still lower than that area. So, ultimately is there a way I can resize iTunes without clicking on the bottom right?
View 3 Replies View RelatedWhere i can replace the aluminum case, is it possible?, i search for spares and didn't find any.
View 2 Replies View RelatedI'm must be hitting some strange key combination / trackpad gesture (I just got a macbook pro) and my font size in safari keeps randomly increasing. This happens on the desktop with the icons as well.
View 4 Replies View RelatedSomething reasonably priced, so i can take it safely out in the car with me! Also will be looking for a car charger for it!Decided against getting an iPad coz of the limitations so im gonna get a dongle, looked around & I like the look of TMobile deal of ?40 for 90 days.
View 1 Replies View RelatedI was trying to do a memory upgrade the other day, and tried to take the wrong screw off. I went to try to screw it out, but the screw stripped. How can I get this thing removed and replace it with a new one? Or should I just take it to the local genius bar?
View 1 Replies View RelatedI have a mid-2006 Macbook and have never tried to do any tinkering on the inside except for installing some RAM. Whenever I had any trouble in the past, I took the machine into the Apple Store. Now that my Applecare warranty is up, I figured that I can crack it open to do some repairs regarding my fan without voiding my warranty. Alas, it seems that someone on Apple's end stripped a screw / put it in improperly. Now, I cannot get it out. The screw in question is the center screw in this picture (from iFixit, not my Macbook): All other screws in the tear down came out easily except for this one. Dammit. What should I do? It is too late to point fingers at Apple because I have no proof that I wasn't the numbskill who did this. It is just such a small screw... I'd just like to remove it somehow
View 14 Replies View RelatedI was replacing my RAM y'day for my 13inch macpro, opening the back cover was very easy, but when I tried putting it back, two of the small screws won't tighten fully. A small part of the screw (25%) wont screw in completely. I can sense the the screw projection when I feel it with fingers. I tried the same angle as shown in the manual to unscrew and screw. And I took spl care to use the same screws for the same holes. I tried to fix it for 1hr, but the two small screws never fits.
