MacBook Pro :: Cannot Open The Bottom Cover After Getting All The Screws Off
Apr 17, 2010It seems that i cannot open the bottom cover after getting all the screws off,
View 8 Replies
ADVERTISEMENT
MacBook Air :: Missing 3 Bottom Screws
Sep 19, 2010I am new to macs. I just bought a used macbook air, and realized 3 screws were missing from the bottom, I called all the local repair shops, no one has screws for it. I would really like to get the screws. Longer ones by the fan I am more concerned about, where could I order them from without getting a while set for like $40? It is out of warranty so apple will not give me the screws.
View 3 Replies View RelatedMacBook Pro :: Bottom Screws Missing - Where To Get
Jan 10, 2011I own a 15 inch late 2008 unibody MacBook Pro. I have recently discovered that one of the screws on the bottom of it is missing. I am not sure where I can buy some new screws for it. Does anyone have any insight into this?
View 2 Replies View RelatedMacBook Pro :: Bottom Scratched When Removing Screws?
May 28, 2010I slipped up a few times and caused hairline scratches on the underside plate of my 13" MBP when I installed my Momentus XT (which I am now returning and getting X25-M). My heart dropped when I heard these screeching noises, but it doesn't look too bad and hopefully eliminates the OCD I tend to have with electronics.
View 12 Replies View RelatedMacBook Pro :: Bottom Screws Lost When Replacing HD
Jul 22, 2010I was woundering if anyone know where i can buy some screws for the bottom of my macbook pro i7 15". I lost one screw when replacing HD and memory. Everywhere I see online wants to sell whole macbook pro screw sets. I only need 1 or maybe anther for a backup. Don't want to spend 50bucks on a set of screws just to use 1.
View 4 Replies View RelatedMacBook :: What The Screw Size Is For The Bottom Case Screws?
Jun 16, 2010Does anyone know what the screw size is for the bottom case screws and the 2 hard drive bracket screws are?
I need to replace some
Anyone know where I can get these screws?
MacBook :: Replacing The Bottom Cover
Jun 22, 2009My girlfriend's MacBook has some deep scratches on the bottom that a polish kit would not fix. I wanted to buy a new bottom cover and replace it for her. I have found quite a few on eBay, but I am not sure on which model will fit. She has the new white NVIDIA MacBook. I assume that because the motherboard is different, would she need a case specific for the NVIDIA model, or will an older Core 2 Duo case work all the same?
View 2 Replies View RelatedMacBook Pro :: Purchase 13" Unibody Bottom Cover
Mar 26, 2010Is it possible to purchase a replacement bottom cover for a 13" unibody MBP?
View 10 Replies View RelatedMacBook :: Bottom Cover Is Missing Need Serial Number?
Apr 15, 2012need serial number so i c an get the bottom cover replaced
View 1 Replies View RelatedOS X :: Cover For Round Hole Used To Remove Battery On Bottom Of Old Macbook Fell Off
Feb 25, 2009On the bottom of my black MacBook, there is a circle that you use to loosen the battery. Today it fell off, so now the silver underneath part is exposed. I keep trying to put the cover back on but it keeps falling out. How do i get it to stay?
View 1 Replies View RelatedSafari :: Cover Flow Only Displays Bottom Half Of Window
Mar 15, 2012The cover flow in safari only displays bottom half of the window, see the picture below, However, those pages that can not be previewed show in full height of the window:
Info:
MacBook Pro, Mac OS X (10.7.2)
MacBook Pro :: Unable To Close Battery Cover Latch / Opened The Battery Cover?
Dec 21, 2008picked up a unibody last Saturday night, and opened the battery cover tonight. The latch was opened with little resistance, but now won't close. The latch edge sits about 1/8" up, and I can't find anything which would seem to prevent it from closing.
Anyone else had a troublesome battery latch, and how did you resolve it?
Safari :: Can't Open It From Bar At Bottom
Mar 12, 2012I am not able to open the Safari from the bar at the bottom, I get a message saying that Safari quit unexpectedly & it instructs me to Reopen but when I click on the button the same message appears. I have also been unable to open PDF documents & wonder if this is related to downloading the Lion OS?
Info:MacBookPro, Mac OS X (10.7.3)
ITunes :: Delete Incorrect Cover Art And Replace It With The Correct Cover Art?
May 20, 2012How do you delete incorrect cover art and replace it with the correct cover art?
View 2 Replies View RelatedOS X Mavericks :: Random Definitions Popup From Bottom Left Of Screen When Dictionary Isn't Even Open
Jun 20, 2014My OS is 10.9.3 and I've only had it for a month or so. Â
I'll be on Firefox or the desktop and without touching the mouse or keyboard or anything 'var' appears highlighted in yellow at the bottom left corner of my screen and a speech bubble will define it. The definition matches the one for 'var' in the built-in dictionary but I very rarely use it and have not had it open while this has happened.Â
It happens about once a week and the word defined has been different 1 or 2 times but mostly its just 'var'. The Macbook also freezes occasionally or has periods of very slow loading; something which never happened with my old Mac White. Do I have a virus or something?
MacBook Pro :: Installing RAM - Screws Won't Fit In?
Jul 1, 2009I was replacing my RAM y'day for my 13inch macpro, opening the back cover was very easy, but when I tried putting it back, two of the small screws won't tighten fully. A small part of the screw (25%) wont screw in completely. I can sense the the screw projection when I feel it with fingers. I tried the same angle as shown in the manual to unscrew and screw. And I took spl care to use the same screws for the same holes. I tried to fix it for 1hr, but the two small screws never fits.
IMac :: Unable To Open IMac Memory Cover - The Screw Won't Turn.
Oct 25, 2009I don't know what the deal is. I'm trying to install 2 sticks of 2GB into my 7,1 iMac, and the screw just won't turn. I'm using a standard Phillips head, and nothin' doin'. The screw is now starting to strip, so I guess I'm going to have to take this into the friggin' Apple Store just to have them open the thing.
MacBook Pro :: How Do I Remove Really Tight SuperDrive Screws
Sep 8, 2010I'm in the process of installing an Optibay in my Macbook Pro and have run into 3 really tight screws. They are the 3.3mm Philips that are used to mount the SuperDrive and Bluetooth board. The one on the Bluetooth came out easy but the other three are really tight. I've used the Philips screw drive that came with the Optibay as well as another screwdriver but none of them budge the screws.
Anyone have any tips or special method of removing those screws?
MacBook :: Installing New Hard Drive (Cannot Get Screws Out)
Aug 5, 2009I'm literally two steps away from installing a new hard drive and I can't get the torx screws out. Is it absolutely vital I take them out and put them in the new hard drive?
View 6 Replies View RelatedMacBook Pro :: Semi Stripped Screws In System
Nov 4, 2009A few weeks back I spilled a glass of wine on my non-unibody, but new, MacBook pro while it was turned on (I know; no good). i let it dry for a few days but still, no life. i decided to open the sucker up to investigate and had successfully taken out the battery and one of the fans before the trouble began. i was using a #000 philips head screwdriver, and most of the screws in the logic board came right out, but some (the same size as the others) wouldn't budge. now i'm not sure if i should just put the thing back together and send it to apple or try to find a different size screwdriver and forge ahead. i know the problem in terms of moisture is on the other side of that logic board (and hard drive, which won't budge either)
View 1 Replies View RelatedMacBook Pro :: What Is The Best Screw Driver Set For Removing The Screws?
Mar 3, 2010I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies View RelatedMacBook Pro :: Hard Drive Mounting Screws - Couldn't Take Out
Sep 8, 2010Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies View RelatedMacBook Pro :: Wants To Purchase Hard Drive Screws/Posts ?
Aug 28, 2009I upgraded my hard drive in my 1st gen unibody MacBook Pro and I have the old drive just laying around. I am thinking of reformatting the drive and using the drive to test stuff out in. where I can purchase four of the hard drive screw/posts? I tried going to the Genius Bar, they referred me to Apple Care, who referred me to an authorized apple dealer... Who want to charge me an hour of labor. I tried to look for them at Fry's but no luck.
View 3 Replies View RelatedMacBook Pro :: Threading / Screws On Unibody Case Stripped?
Aug 28, 2009I took off the back cover of my MBP (early 2009) and the screws will not go all the way down. I think they are stripped. Is there anyway to use a tap and die set to fix the threads? Has anyone had a problem like mine? I had to take the cover off to check my memory (that is a whole other post) but when I put the cover back on the little screws would not go in very far. The just stick out of the case and will not go in any further. I could "make" them go down, but I do not think that would be wise to force the screws into place, because they may not come back out if the laptop ever needs to be worked on again. does removing your back cover on a MBP void your warranty? I just had a genius tell me that becasue I took the back cover off I voided my warranty, but they are going to replace my memory
View 14 Replies View RelatedMacBook Pro :: Hard Drive Screws Stripped - Extractors?
Oct 8, 2009I tried changing the hard drive on my MBP, only to totally strip the screws on the hard drive bar. Took it to Apple, they are happy to repair it, they said they may have to break the hard drive bar in order to get it out, but no problem. However, my local Apple Store is closed for a refitting until 30/10/09 and they want �48 in order to do the repair. That leaves a slightly bitter taste in my mouth considering it's such a small job. I'm wondering if anyone has had any experience with 'screw extractors'? They are little screw bits that bite into the screw in order to turn it. They are about �9 for a set so could save me a bit of cash. To be honest, it's not the money that's the problem, I don't want to wait another 3 weeks. I'm not really wanting to drill into the screw or glue a hex key, so the 'screw extractor' is the only option really. Just wondered if anyone can vouch for these little extractors. If not, then I'll suck it up and Apple loose on my machine.
View 16 Replies View RelatedMacBook Pro :: Stripped Screws Holding In Hard Drive
Jul 9, 2010Anywhere to find replacements? It's the two top screws holding the bracket in place. How am I going to get these things out? I am not sure why they are so tight this time.
View 7 Replies View RelatedMacBook Pro :: Things Not To Do When Installing An Optibay - Stripped Screws
Jul 30, 2010Today I received my Optibay-clone and hard drive, and tried to install it. Unfortunately, I messed it up and don't think I can finish the job now. Using driver bits supplied by ifixit, I managed to ruin the screws in step 10 of this guide: [URL] Tight, tiny screws are the bane of my existence. I don't understand what on earth I was supposed to do to remove these particular screws, when all the other screws in the computer didn't pose a problem at all. See awesome attached pics of mutilated screw, and the 10 or so different Phillips screwdrivers, none of which managed to do the job. So, am I completely screwed, or does someone out there have a magnificent suggestion to aid me in my plight?
View 7 Replies View RelatedMacBook Pro :: Completely Stripped Out Hard Drive Bracket Screws - Drill?
Dec 3, 2009well while attempting to replace my hard drive I like many other people I completely stripped out the two screws on the hard drive bracket on my 15" PowerBook G4. They are very small screws, and I thought I had the correct size philips but apparently not. I tried to cut a slot in one of them with a Dremel but that only destroyed the entire head of the screw and sent bits of shavings everywhere. What can I do to get these screws out? Should I drill them out? I just can't think of any other way to get them out when one's stripped and one is worse than stripped. Is it possible to get replacements?
View 4 Replies View RelatedMac Pro :: Hard Drive Sleds & Screws
Aug 12, 2008So i got a new macpro, and i installed 3 drives in the remaining three bays and i wanted to replace the stock/factory drive withi my own, however the screws were badly stripped like the installed had a bad time trying to get it in there properly. im wondering if theres anyplace to pick up some replacement screws for the 2008 MP models. called apple said they dont have those in stock to just ship out.
View 5 Replies View RelatedMac Pro :: Hard Drive Caddy Screws
Aug 31, 2009Is there any place that sells these screws? After a few HDD swaps the heads of some of my screws have worn down.
View 1 Replies View Related
