MacBook Pro :: Installing RAM - Screws Won't Fit In?
Jul 1, 2009
I was replacing my RAM y'day for my 13inch macpro, opening the back cover was very easy, but when I tried putting it back, two of the small screws won't tighten fully. A small part of the screw (25%) wont screw in completely. I can sense the the screw projection when I feel it with fingers. I tried the same angle as shown in the manual to unscrew and screw. And I took spl care to use the same screws for the same holes. I tried to fix it for 1hr, but the two small screws never fits.
View 6 Replies
ADVERTISEMENT
Aug 5, 2009
I'm literally two steps away from installing a new hard drive and I can't get the torx screws out. Is it absolutely vital I take them out and put them in the new hard drive?
View 6 Replies
View Related
Jul 30, 2010
Today I received my Optibay-clone and hard drive, and tried to install it. Unfortunately, I messed it up and don't think I can finish the job now. Using driver bits supplied by ifixit, I managed to ruin the screws in step 10 of this guide: [URL] Tight, tiny screws are the bane of my existence. I don't understand what on earth I was supposed to do to remove these particular screws, when all the other screws in the computer didn't pose a problem at all. See awesome attached pics of mutilated screw, and the 10 or so different Phillips screwdrivers, none of which managed to do the job. So, am I completely screwed, or does someone out there have a magnificent suggestion to aid me in my plight?
View 7 Replies
View Related
Sep 19, 2010
I am new to macs. I just bought a used macbook air, and realized 3 screws were missing from the bottom, I called all the local repair shops, no one has screws for it. I would really like to get the screws. Longer ones by the fan I am more concerned about, where could I order them from without getting a while set for like $40? It is out of warranty so apple will not give me the screws.
View 3 Replies
View Related
Jan 10, 2011
I own a 15 inch late 2008 unibody MacBook Pro. I have recently discovered that one of the screws on the bottom of it is missing. I am not sure where I can buy some new screws for it. Does anyone have any insight into this?
View 2 Replies
View Related
Sep 8, 2010
I'm in the process of installing an Optibay in my Macbook Pro and have run into 3 really tight screws. They are the 3.3mm Philips that are used to mount the SuperDrive and Bluetooth board. The one on the Bluetooth came out easy but the other three are really tight. I've used the Philips screw drive that came with the Optibay as well as another screwdriver but none of them budge the screws.
Anyone have any tips or special method of removing those screws?
View 21 Replies
View Related
Nov 4, 2009
A few weeks back I spilled a glass of wine on my non-unibody, but new, MacBook pro while it was turned on (I know; no good). i let it dry for a few days but still, no life. i decided to open the sucker up to investigate and had successfully taken out the battery and one of the fans before the trouble began. i was using a #000 philips head screwdriver, and most of the screws in the logic board came right out, but some (the same size as the others) wouldn't budge. now i'm not sure if i should just put the thing back together and send it to apple or try to find a different size screwdriver and forge ahead. i know the problem in terms of moisture is on the other side of that logic board (and hard drive, which won't budge either)
View 1 Replies
View Related
Mar 3, 2010
I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies
View Related
Apr 17, 2010
It seems that i cannot open the bottom cover after getting all the screws off,
View 8 Replies
View Related
May 28, 2010
I slipped up a few times and caused hairline scratches on the underside plate of my 13" MBP when I installed my Momentus XT (which I am now returning and getting X25-M). My heart dropped when I heard these screeching noises, but it doesn't look too bad and hopefully eliminates the OCD I tend to have with electronics.
View 12 Replies
View Related
Jul 22, 2010
I was woundering if anyone know where i can buy some screws for the bottom of my macbook pro i7 15". I lost one screw when replacing HD and memory. Everywhere I see online wants to sell whole macbook pro screw sets. I only need 1 or maybe anther for a backup. Don't want to spend 50bucks on a set of screws just to use 1.
View 4 Replies
View Related
Sep 8, 2010
Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies
View Related
Aug 28, 2009
I upgraded my hard drive in my 1st gen unibody MacBook Pro and I have the old drive just laying around. I am thinking of reformatting the drive and using the drive to test stuff out in. where I can purchase four of the hard drive screw/posts? I tried going to the Genius Bar, they referred me to Apple Care, who referred me to an authorized apple dealer... Who want to charge me an hour of labor. I tried to look for them at Fry's but no luck.
View 3 Replies
View Related
Aug 28, 2009
I took off the back cover of my MBP (early 2009) and the screws will not go all the way down. I think they are stripped. Is there anyway to use a tap and die set to fix the threads? Has anyone had a problem like mine? I had to take the cover off to check my memory (that is a whole other post) but when I put the cover back on the little screws would not go in very far. The just stick out of the case and will not go in any further. I could "make" them go down, but I do not think that would be wise to force the screws into place, because they may not come back out if the laptop ever needs to be worked on again. does removing your back cover on a MBP void your warranty? I just had a genius tell me that becasue I took the back cover off I voided my warranty, but they are going to replace my memory
View 14 Replies
View Related
Oct 8, 2009
I tried changing the hard drive on my MBP, only to totally strip the screws on the hard drive bar. Took it to Apple, they are happy to repair it, they said they may have to break the hard drive bar in order to get it out, but no problem. However, my local Apple Store is closed for a refitting until 30/10/09 and they want �48 in order to do the repair. That leaves a slightly bitter taste in my mouth considering it's such a small job. I'm wondering if anyone has had any experience with 'screw extractors'? They are little screw bits that bite into the screw in order to turn it. They are about �9 for a set so could save me a bit of cash. To be honest, it's not the money that's the problem, I don't want to wait another 3 weeks. I'm not really wanting to drill into the screw or glue a hex key, so the 'screw extractor' is the only option really. Just wondered if anyone can vouch for these little extractors. If not, then I'll suck it up and Apple loose on my machine.
View 16 Replies
View Related
Jun 16, 2010
Does anyone know what the screw size is for the bottom case screws and the 2 hard drive bracket screws are?
I need to replace some
Anyone know where I can get these screws?
View 3 Replies
View Related
Jul 9, 2010
Anywhere to find replacements? It's the two top screws holding the bracket in place. How am I going to get these things out? I am not sure why they are so tight this time.
View 7 Replies
View Related
Dec 3, 2009
well while attempting to replace my hard drive I like many other people I completely stripped out the two screws on the hard drive bracket on my 15" PowerBook G4. They are very small screws, and I thought I had the correct size philips but apparently not. I tried to cut a slot in one of them with a Dremel but that only destroyed the entire head of the screw and sent bits of shavings everywhere. What can I do to get these screws out? Should I drill them out? I just can't think of any other way to get them out when one's stripped and one is worse than stripped. Is it possible to get replacements?
View 4 Replies
View Related
Aug 12, 2008
So i got a new macpro, and i installed 3 drives in the remaining three bays and i wanted to replace the stock/factory drive withi my own, however the screws were badly stripped like the installed had a bad time trying to get it in there properly. im wondering if theres anyplace to pick up some replacement screws for the 2008 MP models. called apple said they dont have those in stock to just ship out.
View 5 Replies
View Related
Aug 31, 2009
Is there any place that sells these screws? After a few HDD swaps the heads of some of my screws have worn down.
View 1 Replies
View Related
Dec 8, 2009
Where do you get replacement screws for the hard drive sleds? I stripped out a few of mine after replacing some hard drives over the past couple years. Also, is there some special screwdriver you are supposed to use to remove the screws other than a Phillips head screwdriver?
View 6 Replies
View Related
Jun 12, 2010
since i have updated to flash 10.1 my mid-2010-mbp i7, in safari (version 5) scrolling is very laggy, when on a page with flash contents. especially when on intel gpu (i use gfxcardstatus). on nvidia its a bit better, but it still sucks.
furthermore, if i do a right-click on any flash content and go to settings, it totally freaks out and switches gpu every second, and the only thing i can do is force quit safari. this doesnt happen, when i'm initially on nvidia-gpu.
View 7 Replies
View Related
Mar 23, 2008
Safari 3.1 doesn't allow you to center click the home, back, and forward buttons to open that page in a new tab like Safari 3.0 allowed you to do.
View 1 Replies
View Related
Oct 31, 2009
I have a 2.0 GHz Intel Core Duo 20 inch iMac (early 2006). I have purchased additional memory that I want to install but when I try to remove the cross point screws holding the cover plate over the memory compartment they will not budge. I am afraid to squirt them with WD40 since I fear overspray would probably go into the memory compartment. I am also afraid to "bump" the screws by tapping the end of the screwdriver with a hamer since the shock might damage the drives. Have anyone of you had this difficulty? If so how did you solve it.
View 1 Replies
View Related
Mar 3, 2009
500$ for new Time Capsule 1 TB is "screwing the buyers".
Airport Extreme & usb-attached external 1 TB HardDrive cost 250 $, and have exactly the same functionality.
so i ask - why does anyone pay 250 $ more for just having two devices in one enclosure? i don't get it !
View 24 Replies
View Related
Jan 5, 2010
I'm curious - I've taken my ibook apart and replaced hardware that had broken, I have TONS of screws... Can anyone direct me to a diagram, etc. that will inform me of ESSENTIAL screws, if those even exist.
View 2 Replies
View Related
Jul 7, 2006
I am wondering if anyone knows where I can get the screws that go in the side of the hard drive and the standoffs (screws) for the bottom of the optical drive for a Power Mac G5.
The hard drive needs screws so it will slide into and sit in the case properly.
I bought a Pioneer DVD drive to replace the original Sony SuperDrive. Apparently, there are different sized standoffs for Pioneer and Sony drives. With the Sony standoffs on the Pioneer drive, the tray scrapes the case when it ejects.
View 4 Replies
View Related
Jul 28, 2009
I just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
View 3 Replies
View Related
Dec 12, 2010
Ive got a 13" MBP and a 120GB Vertex 2E with the optibay option where im going to put the factory HDD in the optibay.
First of all im not worried about retaining any information on the drives so it 'should' be a straightforward task.
Once all the components are in place do i just pop in the the OSX cd that came with my mac into an external optical drive and reinstall the OS?
View 6 Replies
View Related
Jun 1, 2009
My mac says I can upgrade my OS to 10.5.7 with a size of 737MB to install along with itunes and a Quicktime update. The update (and programs) download fine, the problem comes in with the install. When I shut down my computer and begin the install process, the status bar moves only a little bit, then stays put. I left my computer on my desk for about 30 minutes and it is still at the same spot.
View 4 Replies
View Related
