MacBook Pro :: What Is The Best Screw Driver Set For Removing The Screws?
Mar 3, 2010I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies
ADVERTISEMENT
MacBook :: What The Screw Size Is For The Bottom Case Screws?
Jun 16, 2010Does anyone know what the screw size is for the bottom case screws and the 2 hard drive bracket screws are?
I need to replace some
Anyone know where I can get these screws?
MacBook Pro :: Bottom Scratched When Removing Screws?
May 28, 2010I slipped up a few times and caused hairline scratches on the underside plate of my 13" MBP when I installed my Momentus XT (which I am now returning and getting X25-M). My heart dropped when I heard these screeching noises, but it doesn't look too bad and hopefully eliminates the OCD I tend to have with electronics.
View 12 Replies View RelatedMacBook :: 2008 Unibody Screw Driver?
Mar 14, 2010I bought a new harddrive to upgrade my macbook's old hard drive to a new one over the spring break. I tried to unscrew the screw on the black plastic retaining bar, but I unfortunately failed to do so: even worse, the screw is completely stripped now!
Since the screw is so small, I don't think I can use any of the "Easy Out" kind of unscrewing stripped screw tools... or can I? Wouldn't I damage the retaining bar? What should I do?
MacBook Pro :: What Screw-driver For 13" Chassis
Feb 23, 2012I need to take the back(chassis) off of my mbp 13" mid 2009, I just wanted to know what screwdriver i need to take the back(chassis) off to install more RAM.
Info:
MacBook Pro, Mac OS X (10.7.2)
MacBook Pro :: Finding Screw Driver For Disassembling Mbp 2010?
Aug 13, 2010i am trying to disassemble my MacBook pro 2010 as i need to change the top part (which is attached the keyboard) has couple of dints on it. i can get the unibody top part for around $270 , my question is what screwdrivers i need to disassemble MBP unibody 2010 is there a special screw driver for this? , do i just need a screwdriver or any thing else too?
also i was not able to find any good how to video for this .
MacBook Pro :: Correct Size Screw Driver - Hard Drive
Nov 18, 2010First off, I am very O.C.D when it comes to my electronics and I constantly worry about my stuff. Over the past month, I have been checking SMART status and benchmarking my hard drive at least once a day. I'm a little worried that my hard drive is dying... Yea, I'm crazy...Regardless of the above, I would like some answers to a few questions..First, how durable are the unibody lower case screws? Do they strip easily? If I purchase the correct size screw driver (phillips #00), what are my risks of damaging the screws, or possibly wearing them out prematurely?Second, how difficult is it to realign the lower case and not cause a "wobble." I have read some people incorrectly screwing in the bottom case and basically bending the lower case, causing the machine to wobble on a flat surface.After reading my manual, Apple clearly indicates that users are permitted to service the hard drive. I'm technologically savvy but my only worries are damaging my $2500 machine...
View 3 Replies View RelatedMacBook Pro :: Removing Underside Of MBP 17 - Pop Sound When Removing On Cover Normal?
Jun 30, 2010as an extension to my question regarding RAM utilization, I've decided to upgrade my RAM. I went through the process of removing the underside of my MBP. After taking the screws out and mentally marking which slot they came out of (some are of different size), I pulled the lid up at the black trim area (the "neck" of the display mount) as this was the easiest way to get a non-damaging grip on the metal underside -- read: I avoided using a screw driver on the lid. As I started to lift, I was surprised at the amount of force I needed to use in order to remove the lid; something near the center of the cover was still holding the lid to the underside of the body. In fact, the amount of force I needed to use made me pause to question if I missed an important step other than simply removing the screws. I decided to "go for it" and applied more pressure while pulling the lid up and away from the body and heard a "pop" noise.
View 1 Replies View RelatedMacBook :: Stripped Screw For HD Bar?
Sep 11, 2009I was trying to do a memory upgrade the other day, and tried to take the wrong screw off. I went to try to screw it out, but the screw stripped. How can I get this thing removed and replace it with a new one? Or should I just take it to the local genius bar?
View 1 Replies View RelatedMacBook :: Stripped Screw - Can't Get It Out
Dec 16, 2009I have a mid-2006 Macbook and have never tried to do any tinkering on the inside except for installing some RAM. Whenever I had any trouble in the past, I took the machine into the Apple Store. Now that my Applecare warranty is up, I figured that I can crack it open to do some repairs regarding my fan without voiding my warranty. Alas, it seems that someone on Apple's end stripped a screw / put it in improperly. Now, I cannot get it out. The screw in question is the center screw in this picture (from iFixit, not my Macbook): All other screws in the tear down came out easily except for this one. Dammit. What should I do? It is too late to point fingers at Apple because I have no proof that I wasn't the numbskill who did this. It is just such a small screw... I'd just like to remove it somehow
View 14 Replies View RelatedMacBook Pro :: Installing RAM - Screws Won't Fit In?
Jul 1, 2009I was replacing my RAM y'day for my 13inch macpro, opening the back cover was very easy, but when I tried putting it back, two of the small screws won't tighten fully. A small part of the screw (25%) wont screw in completely. I can sense the the screw projection when I feel it with fingers. I tried the same angle as shown in the manual to unscrew and screw. And I took spl care to use the same screws for the same holes. I tried to fix it for 1hr, but the two small screws never fits.
OS X :: Macbook Pro Side Screw Replacement?
May 1, 2009Sorta found this forum out of sheer luck but it looks like a good place to kill a couple of years off my life
Im looking for a replacement screw for the left side of a MBP A1150, [URL] sells a screw kit for around 50bucks but all I need is 1 screw and wondering if their is a cheaper alternative
Pic is attached along with the void that will never be complete
MacBook Pro :: Can I Screw Up My Mbp With This Terminal Command
May 28, 2010Just bought a new MacBook Pro yesterday and I'm having trouble getting Time Machine to work with my NAS (WD My Book World Edition which supposedly supports Time Machine after their last firmware update). Time Machine sees it and starts writing to it but then stops recognizing the external NAS drive even though it's still connected to the network and I can access it and its files through the Finder.
So I did some Googling and came across this article and this command line...
MacBook Pro :: Shells - Screw It And Get Sleeve Instead?
Jul 28, 2010Does anyone have any information/experience with the shells for your MBP? I had thought about getting one for my MBP but I have read issues of the cases scratching the laptop as well as the plastic clips holding the case snapping off after a month or two. Seeing as how most of these cases are around $40-$50, I just wanted to see if this was a good idea or if I should just say screw it and get a sleeve instead.
View 4 Replies View RelatedMacBook Air :: Missing 3 Bottom Screws
Sep 19, 2010I am new to macs. I just bought a used macbook air, and realized 3 screws were missing from the bottom, I called all the local repair shops, no one has screws for it. I would really like to get the screws. Longer ones by the fan I am more concerned about, where could I order them from without getting a while set for like $40? It is out of warranty so apple will not give me the screws.
View 3 Replies View RelatedMacBook Pro :: Bottom Screws Missing - Where To Get
Jan 10, 2011I own a 15 inch late 2008 unibody MacBook Pro. I have recently discovered that one of the screws on the bottom of it is missing. I am not sure where I can buy some new screws for it. Does anyone have any insight into this?
View 2 Replies View RelatedMacBook Pro :: Remove Stripped Screw - Can't Grip
Aug 27, 2010The screws that hold the battery in place (Triwing Ones) One of them is stripped on my MBP. I ordered some new ones and they should be arriving next week. Does anyone have an idea how to get the stripped one out? I have tried pliers but they don't seem to grip the screw to be able to turn it. This is the screw I mean.
View 14 Replies View RelatedMacBook Pro :: Secure Mbp Using DVI Port Screw Holes?
Aug 23, 2009I'm wondering if there are any products out there can secure my MacBook Pro by using one or two of the screw holes on either side of the DVI port.
I bought a Kensington MicroSaver keyed lock even though MacBook Pro users said it didn't work. I'm once again confirming that... The Kensington lock port on the MB and MBP are totally useless. There are lots of products of this nature out there for VGA/serial ports, but I have found nothing for DVI.
This is the only product I found that does what I want, but it isn't available for sale anywhere:
[URL]
[URL]
MacBook Pro :: Does Striping A Screw Void Warranty
Oct 23, 2009I have a refurbished macBook Pro and everything was working fine (it's about 9 months old). So everything was fine till suddenly the right fan started making these horrible noises. Kinda like a motor boat along with with ticking clanking sounds. It comes and goes: also Istat shows that the max RPM is 3000 or so.
Thinking something was stuck in the fan I figured i'd take the back cover off to take a look, and now I have stripped one of the outer screws holding the back cover. Now i'm worried my warranty is void, even though the fan issue was not my fault but the stripped screw is.
I plan on going to the apple store soon to see what they say but I was curious as to what you guys think first. Will the apple store fix the screw and then replace that fan?
MacBook Pro :: Opening 15" Mbp Case Screw?
Jun 13, 2010I have a brand new 15" i7 Macbook Pro that I bought from the Apple store over 14 days ago. I opened it up to put in an SSD drive and optibay. Now, this was my first time opening up a unibody, but I've opened up many notebook computers and older style Macbook Pros before, so I'm not a newbie.
However, putting things back together I ran into a problem. One of the screws that secures the metal plate on the bottom of the machine will not catch in it's hole, and therefore does not stay in. I swear I did nothing to strip this screw or the hole it goes into. When I screw the screw into the hole with the case off, it smoothly sets and seems to be fine. However, when the metal plate is put on and the screw is put threw it, it's like the screw is not long enough to reach the threaded part of the hole
Yes, I'm positive it's the right screw. The hole I'm talking about is along the back side of the computer, towards the hinges, and is the only one of the 4 screws that is the shorter style screw (vs the long ones that occupy the other three holes).
I'm at a loss for what to do. I'm thinking about putting all the stock stuff in place and taking it into the apple store for help at this point.
MacBook :: Stripped Screw In Optical Module?
Feb 7, 2012Recently I up/downgraded from a 2010 17" Macbook Pro to a 2011 15" Macbook Pro. I had previously swapped the old hard drive in the 17" to an SSD using the OWC data doubler kit. Now that I moved on to the 15", I wanted to move my SSD over to the new Macbook Pro.
During the process opening the new MacBook and unscrewing a two of the screws around the optical drive, both of the screws became stripped on the module the covers the optical drive. I have to be honest and say that they are pretty badly striped at this point. I've read a handful of articles online with many different possible solutions on removing the stripped screw, but none of which seem to work nor do I want to cause any further or possible permanent damage, I do have AppleCare on the machine, but I wasn't sure if modifications and upgrades such as this where covered.
Info:
MacBook Pro, Mac OS X (10.7.3)
MacBook Pro :: Did Last Apple Update Screw Up Computer
Jun 13, 2012The last two Apple software updates seemed to have screwed up my computer. After downloading and installing the last one (which included an update to iTunes), I could not turn on iTunes - it just made my computer freeze up.I could not shut it down the regular way.So I pressed the power button for 5 seconds, which turned the computer off finally. Then let it sit for 30 seconds. And when I went to turn it on - the computer got to the gray screen and just hung there.I finally had to press the power button for 5 seconds to shut it down so I could hook up my external hard drives and boot from there.Tried to see if I could boot from the internal HD it froze again. Tried to run Disk Utility, which recongized the hard drive under the name I gave it and it was mounted. After running Disk Utility, the internal drive is no longer showing up on my desktop. It does show up in Disk Utility and in Drive Genius but will not mount.I should also mention that my keyboard and trackpad stopped working after the last update.I have been using an auxiliary keyboard and trackball for years, and have no problem with them now.
Info:
Mac OS X (10.6.4)
MacBook Pro :: How Do I Remove Really Tight SuperDrive Screws
Sep 8, 2010I'm in the process of installing an Optibay in my Macbook Pro and have run into 3 really tight screws. They are the 3.3mm Philips that are used to mount the SuperDrive and Bluetooth board. The one on the Bluetooth came out easy but the other three are really tight. I've used the Philips screw drive that came with the Optibay as well as another screwdriver but none of them budge the screws.
Anyone have any tips or special method of removing those screws?
MacBook :: Installing New Hard Drive (Cannot Get Screws Out)
Aug 5, 2009I'm literally two steps away from installing a new hard drive and I can't get the torx screws out. Is it absolutely vital I take them out and put them in the new hard drive?
View 6 Replies View RelatedMacBook Pro :: Semi Stripped Screws In System
Nov 4, 2009A few weeks back I spilled a glass of wine on my non-unibody, but new, MacBook pro while it was turned on (I know; no good). i let it dry for a few days but still, no life. i decided to open the sucker up to investigate and had successfully taken out the battery and one of the fans before the trouble began. i was using a #000 philips head screwdriver, and most of the screws in the logic board came right out, but some (the same size as the others) wouldn't budge. now i'm not sure if i should just put the thing back together and send it to apple or try to find a different size screwdriver and forge ahead. i know the problem in terms of moisture is on the other side of that logic board (and hard drive, which won't budge either)
View 1 Replies View RelatedMacBook Pro :: Cannot Open The Bottom Cover After Getting All The Screws Off
Apr 17, 2010It seems that i cannot open the bottom cover after getting all the screws off,
View 8 Replies View RelatedMacBook Pro :: Bottom Screws Lost When Replacing HD
Jul 22, 2010I was woundering if anyone know where i can buy some screws for the bottom of my macbook pro i7 15". I lost one screw when replacing HD and memory. Everywhere I see online wants to sell whole macbook pro screw sets. I only need 1 or maybe anther for a backup. Don't want to spend 50bucks on a set of screws just to use 1.
View 4 Replies View RelatedMacBook Pro :: Hard Drive Mounting Screws - Couldn't Take Out
Sep 8, 2010Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
View 8 Replies View RelatedMacBook Pro :: Wants To Purchase Hard Drive Screws/Posts ?
Aug 28, 2009I upgraded my hard drive in my 1st gen unibody MacBook Pro and I have the old drive just laying around. I am thinking of reformatting the drive and using the drive to test stuff out in. where I can purchase four of the hard drive screw/posts? I tried going to the Genius Bar, they referred me to Apple Care, who referred me to an authorized apple dealer... Who want to charge me an hour of labor. I tried to look for them at Fry's but no luck.
View 3 Replies View RelatedMacBook Pro :: Threading / Screws On Unibody Case Stripped?
Aug 28, 2009I took off the back cover of my MBP (early 2009) and the screws will not go all the way down. I think they are stripped. Is there anyway to use a tap and die set to fix the threads? Has anyone had a problem like mine? I had to take the cover off to check my memory (that is a whole other post) but when I put the cover back on the little screws would not go in very far. The just stick out of the case and will not go in any further. I could "make" them go down, but I do not think that would be wise to force the screws into place, because they may not come back out if the laptop ever needs to be worked on again. does removing your back cover on a MBP void your warranty? I just had a genius tell me that becasue I took the back cover off I voided my warranty, but they are going to replace my memory
View 14 Replies View Related