MacBook Pro :: Opening 15" Mbp Case Screw?
Jun 13, 2010
I have a brand new 15" i7 Macbook Pro that I bought from the Apple store over 14 days ago. I opened it up to put in an SSD drive and optibay. Now, this was my first time opening up a unibody, but I've opened up many notebook computers and older style Macbook Pros before, so I'm not a newbie.
However, putting things back together I ran into a problem. One of the screws that secures the metal plate on the bottom of the machine will not catch in it's hole, and therefore does not stay in. I swear I did nothing to strip this screw or the hole it goes into. When I screw the screw into the hole with the case off, it smoothly sets and seems to be fine. However, when the metal plate is put on and the screw is put threw it, it's like the screw is not long enough to reach the threaded part of the hole
Yes, I'm positive it's the right screw. The hole I'm talking about is along the back side of the computer, towards the hinges, and is the only one of the 4 screws that is the shorter style screw (vs the long ones that occupy the other three holes).
I'm at a loss for what to do. I'm thinking about putting all the stock stuff in place and taking it into the apple store for help at this point.
View 7 Replies
ADVERTISEMENT
Jun 16, 2010
Does anyone know what the screw size is for the bottom case screws and the 2 hard drive bracket screws are?
I need to replace some
Anyone know where I can get these screws?
View 3 Replies
View Related
Jan 7, 2009
When ever i open or close the case for my white macbook it makes a creeky noise. Is this normal or should i go to the apple store and get them to check it for me?
View 8 Replies
View Related
Jun 29, 2010
My friend has a 1st gen Macbook Pro (the model just before the unibody) which I offered to upgrade the hard drive in after he was complaining he didn't have enough space. I successfully did this to mine last year so I didn't think I would have any issues doing it again.
It was all fine until I put it all back together again and fired it up, and now the screen remains blank. I can hear the hard drive whirring away and the CD drive spinning when I put the installation disk in (which now I can't get out) but nothing seems to be working. I thought it might have something to do with the new hard drive I tried to install so I swapped it back out for the old one and I still have the same problem.
I was very careful dismantling it (and have done it many times before) and I can't see anything obvious internally that would be causing this problem. Does anybody have any idea what could be causing this? It's bad enough this is happening but it's even worse that it isn't my computer that it's happening to.
View 6 Replies
View Related
Oct 22, 2007
Putting a new DC In board into my iBook this afternoon, but I'm stuck on opening the bottom case. I've got all screws apart from the Hex screw in the middle of the case, which will not come out at all. Im using a T8 Screwdriver for it, the same one that got all the other hex screws out.
View 4 Replies
View Related
Oct 26, 2009
I was wanting to know how hard it is to change top and bottom case and keyboard area? I would like to know that if anything was to happen to my soon to have macbook I could change it. Also this on the older macbooks. And if I have Apple to change it how much would it cost? And yes I know that they should replace keyboard case area for free because of the defunct cracking issue.
View 3 Replies
View Related
Aug 12, 2008
Where i can replace the aluminum case, is it possible?, i search for spares and didn't find any.
View 2 Replies
View Related
Aug 31, 2010
Something reasonably priced, so i can take it safely out in the car with me! Also will be looking for a car charger for it!Decided against getting an iPad coz of the limitations so im gonna get a dongle, looked around & I like the look of TMobile deal of ?40 for 90 days.
View 1 Replies
View Related
Sep 11, 2009
I was trying to do a memory upgrade the other day, and tried to take the wrong screw off. I went to try to screw it out, but the screw stripped. How can I get this thing removed and replace it with a new one? Or should I just take it to the local genius bar?
View 1 Replies
View Related
Dec 16, 2009
I have a mid-2006 Macbook and have never tried to do any tinkering on the inside except for installing some RAM. Whenever I had any trouble in the past, I took the machine into the Apple Store. Now that my Applecare warranty is up, I figured that I can crack it open to do some repairs regarding my fan without voiding my warranty. Alas, it seems that someone on Apple's end stripped a screw / put it in improperly. Now, I cannot get it out. The screw in question is the center screw in this picture (from iFixit, not my Macbook): All other screws in the tear down came out easily except for this one. Dammit. What should I do? It is too late to point fingers at Apple because I have no proof that I wasn't the numbskill who did this. It is just such a small screw... I'd just like to remove it somehow
View 14 Replies
View Related
Nov 9, 2009
I have about 50 *.mp3's on my hard drive that have the file names in all upper case. When looking at them in itunes it drives me nuts....Is there a way to convert the uppercase file name to lowercase? I have googled but can't find anything. I do not want to do it manually, that would take a long time =( thanks, I'm crossing my fingers
View 11 Replies
View Related
May 1, 2009
Sorta found this forum out of sheer luck but it looks like a good place to kill a couple of years off my life
Im looking for a replacement screw for the left side of a MBP A1150, [URL] sells a screw kit for around 50bucks but all I need is 1 screw and wondering if their is a cheaper alternative
Pic is attached along with the void that will never be complete
View 5 Replies
View Related
May 28, 2010
Just bought a new MacBook Pro yesterday and I'm having trouble getting Time Machine to work with my NAS (WD My Book World Edition which supposedly supports Time Machine after their last firmware update). Time Machine sees it and starts writing to it but then stops recognizing the external NAS drive even though it's still connected to the network and I can access it and its files through the Finder.
So I did some Googling and came across this article and this command line...
View 9 Replies
View Related
Jul 28, 2010
Does anyone have any information/experience with the shells for your MBP? I had thought about getting one for my MBP but I have read issues of the cases scratching the laptop as well as the plastic clips holding the case snapping off after a month or two. Seeing as how most of these cases are around $40-$50, I just wanted to see if this was a good idea or if I should just say screw it and get a sleeve instead.
View 4 Replies
View Related
Aug 27, 2010
The screws that hold the battery in place (Triwing Ones) One of them is stripped on my MBP. I ordered some new ones and they should be arriving next week. Does anyone have an idea how to get the stripped one out? I have tried pliers but they don't seem to grip the screw to be able to turn it. This is the screw I mean.
View 14 Replies
View Related
Aug 23, 2009
I'm wondering if there are any products out there can secure my MacBook Pro by using one or two of the screw holes on either side of the DVI port.
I bought a Kensington MicroSaver keyed lock even though MacBook Pro users said it didn't work. I'm once again confirming that... The Kensington lock port on the MB and MBP are totally useless. There are lots of products of this nature out there for VGA/serial ports, but I have found nothing for DVI.
This is the only product I found that does what I want, but it isn't available for sale anywhere:
[URL]
[URL]
View 4 Replies
View Related
Oct 23, 2009
I have a refurbished macBook Pro and everything was working fine (it's about 9 months old). So everything was fine till suddenly the right fan started making these horrible noises. Kinda like a motor boat along with with ticking clanking sounds. It comes and goes: also Istat shows that the max RPM is 3000 or so.
Thinking something was stuck in the fan I figured i'd take the back cover off to take a look, and now I have stripped one of the outer screws holding the back cover. Now i'm worried my warranty is void, even though the fan issue was not my fault but the stripped screw is.
I plan on going to the apple store soon to see what they say but I was curious as to what you guys think first. Will the apple store fix the screw and then replace that fan?
View 24 Replies
View Related
Mar 3, 2010
I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies
View Related
Mar 14, 2010
I bought a new harddrive to upgrade my macbook's old hard drive to a new one over the spring break. I tried to unscrew the screw on the black plastic retaining bar, but I unfortunately failed to do so: even worse, the screw is completely stripped now!
Since the screw is so small, I don't think I can use any of the "Easy Out" kind of unscrewing stripped screw tools... or can I? Wouldn't I damage the retaining bar? What should I do?
View 7 Replies
View Related
Feb 7, 2012
Recently I up/downgraded from a 2010 17" Macbook Pro to a 2011 15" Macbook Pro. I had previously swapped the old hard drive in the 17" to an SSD using the OWC data doubler kit. Now that I moved on to the 15", I wanted to move my SSD over to the new Macbook Pro.
During the process opening the new MacBook and unscrewing a two of the screws around the optical drive, both of the screws became stripped on the module the covers the optical drive. I have to be honest and say that they are pretty badly striped at this point. I've read a handful of articles online with many different possible solutions on removing the stripped screw, but none of which seem to work nor do I want to cause any further or possible permanent damage, I do have AppleCare on the machine, but I wasn't sure if modifications and upgrades such as this where covered.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Feb 23, 2012
I need to take the back(chassis) off of my mbp 13" mid 2009, I just wanted to know what screwdriver i need to take the back(chassis) off to install more RAM.
Info:
MacBook Pro, Mac OS X (10.7.2)
View 10 Replies
View Related
Jun 13, 2012
The last two Apple software updates seemed to have screwed up my computer. After downloading and installing the last one (which included an update to iTunes), I could not turn on iTunes - it just made my computer freeze up.I could not shut it down the regular way.So I pressed the power button for 5 seconds, which turned the computer off finally. Then let it sit for 30 seconds. And when I went to turn it on - the computer got to the gray screen and just hung there.I finally had to press the power button for 5 seconds to shut it down so I could hook up my external hard drives and boot from there.Tried to see if I could boot from the internal HD it froze again. Tried to run Disk Utility, which recongized the hard drive under the name I gave it and it was mounted. After running Disk Utility, the internal drive is no longer showing up on my desktop. It does show up in Disk Utility and in Drive Genius but will not mount.I should also mention that my keyboard and trackpad stopped working after the last update.I have been using an auxiliary keyboard and trackball for years, and have no problem with them now.
Info:
Mac OS X (10.6.4)
View 6 Replies
View Related
Aug 13, 2010
i am trying to disassemble my MacBook pro 2010 as i need to change the top part (which is attached the keyboard) has couple of dints on it. i can get the unibody top part for around $270 , my question is what screwdrivers i need to disassemble MBP unibody 2010 is there a special screw driver for this? , do i just need a screwdriver or any thing else too?
also i was not able to find any good how to video for this .
View 9 Replies
View Related
Oct 18, 2007
Does anyone know if the PB 15.4 Aluminum case is exchangeable with the Macbook Pro 15.4 case? I have a 1.6Ghz Powerbook which has a few dents in the front but I don't see any of these cases for sale on Ebay, but I do see Macbook Pro cases. It's really a nasty cosmetic issue I'd like to resolve and then sell it.
View 1 Replies
View Related
Jun 14, 2010
I am working on restoring a Time Machine backup from Leopard to a clean installation of Snow Leopard. The only problem I'm facing is that the Leopard backup is on a case-sensitive drive (and the Snow Leopard drive is set up, by default, as case-ignorant).
I have scoured the Web the last two days and have not found a definitive answer to my question: Is there a way to transfer the data from the Time Machine backup on the case-sensitive drive to the case-ignorant Snow Leopard drive?
Yesterday I ran across a tutorial explaining how this might be accomplished using SuperDuper! but a commenter explained that Disk Utility could be used and was much easier.
I tried the Disk Utility method but it didn't work, and I ran out of time to give the SuperDuper! option a try. Does anyone know if it, or even Carbon Copy Cloner, might solve my problem?
View 1 Replies
View Related
Nov 18, 2010
First off, I am very O.C.D when it comes to my electronics and I constantly worry about my stuff. Over the past month, I have been checking SMART status and benchmarking my hard drive at least once a day. I'm a little worried that my hard drive is dying... Yea, I'm crazy...Regardless of the above, I would like some answers to a few questions..First, how durable are the unibody lower case screws? Do they strip easily? If I purchase the correct size screw driver (phillips #00), what are my risks of damaging the screws, or possibly wearing them out prematurely?Second, how difficult is it to realign the lower case and not cause a "wobble." I have read some people incorrectly screwing in the bottom case and basically bending the lower case, causing the machine to wobble on a flat surface.After reading my manual, Apple clearly indicates that users are permitted to service the hard drive. I'm technologically savvy but my only worries are damaging my $2500 machine...
View 3 Replies
View Related
Jul 30, 2009
Is it supposed to snap in as well as screw in when putting it back onto the computer? When I upgraded my HDD I thought I remembered seeing in a tutorial video that the back panel was supposed to snap shut before screwing it in. Am I missing something or am I totally wong here?
View 4 Replies
View Related
Aug 2, 2009
I was just about to order Snow Leopard, but then it hit me. Could it screw up rEFIt and my triple booting-ness? I asked my friend who is also using rEFIt and they think it could mess things up. What's your opinion, will it do no harm, or will it? And if it does, should I still get Snow Leopard? It was a bit of a pain installing everything, and I've just finished installing 80GB of games onto my Windows partition, so obviously I don't want that getting wiped or unable to boot!
View 2 Replies
View Related
Jul 20, 2010
So I was taking apart my MBP to reapply thermal paste on the chips and I accidentally stripped one of the screws holding the super drive to the chassis. It is a 3.3mm Phillips screw that is on the bottom right of the super drive if you are facing the screen when it is upright. The screw is heavily stripped as looks nothing like a + now. Does anyone have any ideas as to what I can do to remove it without damaging the rest of my MBP? I have 3 sets of high precision tools and they all are having a hard time with the screws on my MBP. My local Apple store was nice enough to order some new screws for me which i will be getting in a few days.
View 10 Replies
View Related
Jun 13, 2009
I saw a link a while back of a guy who converted an old G5 case into a server, any idea how to do this?
Or does someone know of the link to see his server, or one like it?
View 3 Replies
View Related
