So I bought a refurb nvidia White MacBook a couple weeks ago and one of the problems I have noticed is that the screen is not flush with the bottom case when closed. The problem is worse on the right side than the left (near the indicator light).
I know that with refurbs you risk getting a slightly less than perfect computer. However, I don't want this problem to get worse. When I first got it I didn't really care but now I'm thinking of the future and of the "what if it gets worse" scenario where I take it in and they think I physically damaged it by accident.
I was wanting to know how hard it is to change top and bottom case and keyboard area? I would like to know that if anything was to happen to my soon to have macbook I could change it. Also this on the older macbooks. And if I have Apple to change it how much would it cost? And yes I know that they should replace keyboard case area for free because of the defunct cracking issue.
I have a mid 2009 macbook (nvidia 9400 version) and i have recently noticed that there is quite a lot of hairline cracks around the speakers on the bottom case, and the screen bezel has actually split at the bottom, and the last couple of weeks the screen has been creaking, i originally thought the creaking might be related to the cracks but it seems to be coming from the actual screen its self.
I know that apple repair out of warranty for cracks on the palm rest, but that area of my macbook is in perfect condition so i'm not sure where i stand here, how much would it cost to have all the casing replaced e.t.c do you think?
it's not really a long story, i have a macbook i got in feb. 2007 i paid 1299 for it, (not like it matters, but it's kinda why im annoyed lol) Well, i was carrying it today, and realized that the plastic by the vent i guess? it's on the bottom of the case near the back edge. so anyway, it is cracking, but not from outside it. it just runs straight across. Will apple help me even though I have no applecare? This seems like a manufacturer's defect to me, but i was hoping macrumors' collective knowledge would have a scenario or someone has been through this before. I'm getting pics ASAP!
I was hoping that Apple would address this in the new MBPs but alas it seems they are the same.I hate the fact that my 15 and 17 mbp bottom cases are too flexible and will actually pop in and out if you hold it in the middle.I think on my new mbp I did this and accidentally heard the fan hitting the case.To get around this, you must hold the mbp from sides only.
When I apply pressure on the bottom case of my MBP(underneath the trackpad), I hear a click. Is this normal? I am currently using the current MBP13'. What is under there? Am I damaging anything?
I am needing to replace the bottom case of my late 2006 MBP. It has a large dent in it that is causing some problems. My question is, do I need to get the exact part number listed on the bottom of my laptop (A1211) or can I get a bottom from any pre-unibody MBP i.e. A1260? Also, has anyone ever replaced this part? How difficult is it? I have experience working on laptops, I've just never taken a mac this much apart.
I have a late 2006 macbook and had the issue with the cracking case repaired today, however, Apple only repaired half of the issue. The 'top' half of the case was fixed (new keyboard, trackpad etc) was replaced and I am more than happy with it. The bottom half of the case (section with USB ports, bottom of the MacBook etc) still has cracks in it and clearly hasn't been replaced. Is this something that should be replaced as a manufacturing fault as they have done with the keyboard, palm rest, trackpad etc?
I have to replace the bottom case of my peryn 2.4ghz macbook pro. I was wondering if anyone bought from usedmac.com and if this model would fit my computer? I will just order this part and go to my apple university shop where a friend of mine works there as a techy and he can change the bottom case.
I would like to replace my 1st generation unibody MacBook Pro's bottom case and I am interested in knowing the price. Can I purchase and replace the bottom case at the local Apple Store (I'm in Sydney)? I'm in warranty, if that's a factor.
I went through all the steps to change the optical drive on an old 500 MHz iBook G3, but am unable to attach the bottom case. The problem is the two long (20mm) screws near the back of the computer -- each apparently has to insert into something that looks like a gold-colored nut with serrated edges, like gears, otherwise the screws just rotate in place and don't "lock up." I'll attach a picture, but my only digital camera until I borrow one from a friend is my cell phone, so the pic won't be too good. The gold pieces fell out during the disassembly process and I can't figure out where they now go.
There's enough external space for two USB ports in the expresscard 34 slot. Is there a card that has two USB ports and is flush with the edge of the laptop? All I can find are dual stacked ones that stick out like this:
I've got a very old iMac PowerPC G4 that I've been wanting to get rid of for a while. It's got 384 MB of RAM and a 700Mhz Processor, along with what I believe is a 50Gb Hard Drive (I haven't found a way to check for sure). It's running Mac OS X 10.2.8. So here's my question. Is there a way to totally flush the hard drive (or reformat it) to get rid of any sensitive data, but then be able to install or keep the OS files and get it running again?
Something reasonably priced, so i can take it safely out in the car with me! Also will be looking for a car charger for it!Decided against getting an iPad coz of the limitations so im gonna get a dongle, looked around & I like the look of TMobile deal of ?40 for 90 days.
I have about 50 *.mp3's on my hard drive that have the file names in all upper case. When looking at them in itunes it drives me nuts....Is there a way to convert the uppercase file name to lowercase? I have googled but can't find anything. I do not want to do it manually, that would take a long time =( thanks, I'm crossing my fingers
Does anyone know if the PB 15.4 Aluminum case is exchangeable with the Macbook Pro 15.4 case? I have a 1.6Ghz Powerbook which has a few dents in the front but I don't see any of these cases for sale on Ebay, but I do see Macbook Pro cases. It's really a nasty cosmetic issue I'd like to resolve and then sell it.
I am working on restoring a Time Machine backup from Leopard to a clean installation of Snow Leopard. The only problem I'm facing is that the Leopard backup is on a case-sensitive drive (and the Snow Leopard drive is set up, by default, as case-ignorant).
I have scoured the Web the last two days and have not found a definitive answer to my question: Is there a way to transfer the data from the Time Machine backup on the case-sensitive drive to the case-ignorant Snow Leopard drive?
Yesterday I ran across a tutorial explaining how this might be accomplished using SuperDuper! but a commenter explained that Disk Utility could be used and was much easier.
I tried the Disk Utility method but it didn't work, and I ran out of time to give the SuperDuper! option a try. Does anyone know if it, or even Carbon Copy Cloner, might solve my problem?
Soon i will be getting a Mac(i think) and was wondering about a case. Since i want a Macbook Pro with the Unibody Housing i want it to be safe. Now i can't decide if i want a case or a Sleeve. Now the Case might have heat issues even with the vents that are on the case. The sleeve won't have that issue but will it be more prone to scratching the Macbook it self? Or should i go no case and just sorta deal with the scratches. There is a Price difference between the Sleeve and the Case. About $20 Cdn more for the Case.
Anyone using anything decent or just chucking it in your bag and hoping it doesn't get scratched/dropped?
Currently using a modded leather square CD storage thingie, but it's a bit thick, kind of defeats the purpose. Wouldn't be so bad if it wasn't for the fixed USB cable which gets snagged.
Strange that the usual suspects (Tucano etc.) haven't made a custom case for this peripheral.
