is it just me or did my macbook's speakers get low? it seems like they aren't as loud as they used to be! did i perhaps mess with something? i went to the settings and checked the sound settings but everything there seems to be ok! i have the volume on my mac. all the way up, and itunes is also turned up!
View 6 RepliesAfter I pulled out the jack for my speakers the volume icon was greyed out [URL]and soon I realized that internal speakers as such have been disabled from the system [URL]When I restart the startup chime is played as usual.Is it a hardware or software thing?
View 3 Replies View RelatedI have a Macbook Pro Retina 15'' early 2013 since one year ago. I´ve noticed some distortion when playing loud music but I cannot say if it happened before. If the speaker can be damaged because of playing loud music? Is there any way of checking if the speaker has been damaged?
Info:
MacBook Pro (Retina, 15-inch, Early 2013), OS X Mavericks (10.9.3)
I'm starting to feel vibrations and some kind of "staticky" sound when I play any videos or music near or at loudest volume. Could it be possibly due to a loose screw? I noticed that on the bottom of my notebook, one screw seems to be slightly looser than the others.
View 3 Replies View RelatedJust got my brand-new 24-inch iMac yesterday, unpacked it and hooked it all up last night (2.93 Ghz, Nvidia120 card). First off, absolutely beautiful computer. But... I'm already noticing a loud "pop" from the speakers on occasion. In doing a little research, I've seen where others have had this problem, but mostly with external speakers. Mine is with the built-in speakers.
Seems to happen when I open a movie or sound file --- and only when one hasn't been opened in the last few minutes. I get a fairly loud "pop" upon opening the file, then everything's fine. If I immediately open another movie or audio file, I don't get a repeat of the pop, but if I wait, say, 5 minutes before opening another movie or audio file, I get the pop again. No peripherals hooked up (other than cable modem) and no software installed that didn't come on it.
The volume quit working on my computers speakers. I try to hit the up volume and a greyed out speaker appears showing volume bar all the way up with a circle below it with a line through it?
Info:
MacBook Pro, Mac OS X (10.5.8)
A year ago next month I bought the best iMac on the market at the time, as souped up as it could possibly be. I have not had any problems with it until now. Last night, my computer began suffering an incredibly strange problem with the internal speakers (I don't own any external ones). It all began when I opened GarageBand: noise was suddenly 10x louder, I tried to turn the volume down and the clicks that usually sound off when I work the volume were not only louder, but different clicks. The only way I could stop the jarringly loud noises was to mute the computer entirely. When I exited out of GarageBand, everything returned to normal.
I thought that was the end of the problem until today. I was on Youtube watching a music video, and in the midst of changing my status on Yahoo messenger, I heard another extremely loud click noises. These clicks don't sound like they're coming from some kind of malfunction in the computer. They sound like the computer actually means to make this sound, like it's stored in the computer's library of sounds. That went away, but the volume was again messed up. It was way too loud and in between turning it down, the volume suddenly disappeared altogether! Without being muted, my computer was not making any noise, although the music video should have still been playing. Only time seemed to solve the problem, as the sound later returned (I exited messenger and re-opened it as I had exited GarageBand--but I wasn't sure if this is what caused the sound to return).
I don't really jam out too loud, but in my opinion, the speakers on the 15" MBP aren't terribly loud. Are the speakers on the 24" Cinema Display any louder? I'm kind of considering picking up one for $599 refurb.
View 3 Replies View RelatedI noticed that in the specifications page regarding the 27" Cinema Display shows that its speakers are 49 watts. How many watts is the current 24" Cinema Display? I'm just curious how loud the 27" Cinema Displays speaker will be. Is the current 27" iMac speakers the same as the stand alone 27" Cinema Displays that will be released in September?
View 2 Replies View RelatedWhenever I startup my macbook pro recently, the small startup tune has suddenly become really loud and there doesn't seem to be any way of making it quieter. Anybody with any idea what caused it and how to solve it?
View 4 Replies View RelatedI boot the iMac, the volume of the single note that it makes when starting up is very loud. I've turned the volume down but when it reboots, it goes back to the original loud setting.
View 1 Replies View RelatedSpeakers are not muted, according to system profiler, they are connected. Won't let me turn them up or down, even though they are set to the highest setting. Basically the volume control is greyed out.
Info:
MacBook Pro, Mac OS X (10.6.8)
2 days ago i received my new mac pro 6-core 3,33GHz...now something really weird and super annoying is going on with this computer...From time to time there is this really loud POP trough my speaker. I'm absolutely 100% sure this has nothing to do with my amp. cables or whatever and its definatly a problem with the MacPro, i know because of the following:
Plugged in new cables, removed every installed software, plugged onto different amplifier, when there are absiolutely no audio cables plugged into the computer and when i use the build in speakers of the mac pro i still hear the POP/distortian like sound, and finaly even took it at my friends house and tested the machine there on his audio instalation...problem remained! not knowing what to do next i decided to go and see a very good technician (music instruments and studio recording) and told him about the problem, he imediatly stated that it "could be" because of the harddisk drive giving like electric impulses or whatever that causes the distortion...or that the sound card or audio chip set waking up from sleep and every time it does there is this loud POP?..................
not sure if this matters, but what is the best way to adjust the volume since with computer speakers there are 2 sources to adjust volume -- on the Mac and on the speakers.
Currently I have my Mac volume up about 3/4, then I use the pod that comes with the Bose Companion 5 to adjust volume. I wonder if I should bring the Mac volume control all way to max, then use the pod to control the volume? Asking the audiophiles here, does it matter?
Up until a few days ago my Creature external speakers worked fine on my early 2008 24" Imac. Now the sound is very low and nothing I have tried seems to affect it in a positive way. I have all the connections on the creatures correctly inserted. There is sound coming from them, but the volume is very low.
Info:
iMac, Mac OS X (10.7.4)
Whenever I adjust the volume on the speakers themselves, they shut off. I have to grab the subwoofer and unplug/plug in again to get any sound to come out. I do not understand what caused this to happen all of a sudden as these speakers worked great for 2 years.
View 1 Replies View RelatedI have a white plastic iMac and the internal speakers have been distorting continuously. The audio is totally distorted at any volume.
Info:
Mac OS X (10.5.6)
I want to connect speakers and a headphone to my Imac at the same time.Since there is only one audio output in the imac, I need a audio splitter and I think I need a headphone splitter then?Now the problem is there is no volume control on my headphone and I want it at a different volume then my speakers, otherwise when I turn my speakers on and the headphones are still connected and I turn volume up loud it will ruin my headphone ( and I don't want my software volume almost down and my speaker control way up)Now I found this headphone splitter, but my question is, will the sound quality still be the same because I need the same sound quality.
I know it's a difficult story,
I just bought my MacBook Pro last week. When I power it up, it makes a loud noise for about a second and a half. I think it's the hard drive starting up or the disc drive. I'm not sure which one, but it's pretty loud, so I was just wondering if anyone else noticed this and if it is normal.
View 10 Replies View RelatedI have iTunes 10.6.1 (7) an Airport Extream Version 6.0 Airport Utility (600.92) That I use with two airport express stations, an Apple TV 2nd Generation with latest software up date. Also have Ipad 3rd Generation and two I phone 4's. Issue: After installing the latest Airport Utility software update I'm unable to connect to my remote speakers in iTunes. The speakers are visible in the pop up menu but iTunes times out when trying to connect. If I use remote to select Apple TV and then via Apple TV select my Computers Library I'm able to play music on the Apple TV / Home Speakers... but still not the Airport Express Stations.
When using remote on the iPhone or iPad the speakers are visible as well but I'm unable to select them... iTunes times out. I can steam music from that is on my iPhone or iPad to each individual speaker, but multiple speaker control is not available and the music from my library is not available. I believe the problem is in the Airplay feature of iTunes and I believe the problems arise when you install the latest version of Airport Utility. You can play on remote speakers, only one at a time, and only if you have the music on a stand alone device (iPhone or iPad)... in summary, bypass iTunes and you can be successful... marginally successful.
MacBook Pro 2.16
10.4.11
Situation: no sound out from speakers in admin and user account and newly created account. Headphones work, startup chimes work on speakers.
Go to Sound in Preferences and only shows Digital Out for output. Should show Internal Speakers. Ran Diskwarrior and Applejack and zapped pram. Took mac apart and confirmed speakers wired correctly which is verified by the start up chimes being audible on the internal speakers. tested all accounts and created new account all with the same results. Did search of Google and MacRumor. Found one unaswered post indicating same problem. Had same problem with another macbook pro, ran same steps, take apart, confirm wiring setup, Diskwarriored, applejacked and zapped pram and it fixed the problem. I'm not sure what else to try. Did check Audio Midi Setup util and it also did not see the internal speakers.
When I use the F11, 12 buttons, the pages go away or the dashboard comes up. I've tried to change the settings but that didn't work either
Info:
MacBook Pro with Retina display
My new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
This may or may not be a stupid proposition, but here it goes: I have a Klipsch Promedia GMX 2.1a speaker system which I like very much. However, I was wondering if I could replace the existing satellite speakers with bookshelf speakers (like Klipsch RB-10 s). I'm hoping this will work because I want to increase the audio output of my system without spending money on an amplifier.
View 3 Replies View RelatedI have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).
View 1 Replies View RelatedRecently, my newer (last year) iMac probably running 10.5 started speaking and wont shut up... there is no obvious way to turn it off. I usually figure problems out myself but there are no system preferences that effect it. I even changed the voice in preferences as a test and it is still the same guy reading everything clicked in all applications except when I am in system preferences so far. Usually when I run into a dead end like this there is some mystery key command that works... anyone know?I also noticed that some of the top line (f) keys are not doing what they are supposed to any longer as well... volume up opens the window for expose & spaces it looks like and does not control the volume monitor brightness controls are not working either... I went to the key and mouse preferences and set the key strokes to default and still the same.
View 6 Replies View Related I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
I was wondering if anyone knows how to do this- it is a pita to adjust separate volume controls on everything. If I adjust the volume on the keyboard, the volume slider in itunes doe snot move. If I set the volume on itunes with a mouse, then come home and use the volume controls on my keyboard, I have to also manually adjust the slider in itunes. Anyway to link the two?
View 3 Replies View RelatedI recently decided to increase the volume of my bootcamp disk, which I had done in the past using a method which ultimately made the disk unrecognizable. This time around I used Winclone to create an image of my bootcamp disk. I was not sure exactly how Winclone worked and to be safe I decided to keep the Bootcamp disk I had, and I created a third partition of a larger volume to which I restored the bootcamp image. Everything worked fine obviously, and the image was restored correctly to the new larger volume. The dilemma is I had two bootcamp disks, so I erased the smaller volume because I no longer needed it. Currently I am trying to restore this empty space within the main disk to the Macintosh HD. Disk util looks like:
I know I can just create a backup of the macintosh HD, another image of the bootcamp disk, and format the disk and start over, but I am hoping there is an easier way to go about this; considering there has been a method engineered such that I can just drag that corner of the mac HD and voila I have instantly more storage after applying, it seems viable that there is something that can be done rather than formatting my disk, unless the necessity for that of course was overlooked.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
