Hardware :: Best Way To Adjust Volume On Speakers?
Dec 23, 2010
not sure if this matters, but what is the best way to adjust the volume since with computer speakers there are 2 sources to adjust volume -- on the Mac and on the speakers.
Currently I have my Mac volume up about 3/4, then I use the pod that comes with the Bose Companion 5 to adjust volume. I wonder if I should bring the Mac volume control all way to max, then use the pod to control the volume? Asking the audiophiles here, does it matter?
Whenever I adjust the volume on the speakers themselves, they shut off. I have to grab the subwoofer and unplug/plug in again to get any sound to come out. I do not understand what caused this to happen all of a sudden as these speakers worked great for 2 years.
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
After I pulled out the jack for my speakers the volume icon was greyed out [URL]and soon I realized that internal speakers as such have been disabled from the system [URL]When I restart the startup chime is played as usual.Is it a hardware or software thing?
I just bought a new 15 inch retina display macbook pro a couple days ago, it came with yoemite installed, it was 10.10. I did a software update and now its 10.10.1 the problem is when I try to adjust the volume the following icons appear, sound source are the internal speakers and i don't have any earphones/external speakers connected.
Info: MacBook Pro (Retina, 15-inch, Mid 2014), OS X Yosemite (10.10.1)
I have found the Max volume in OS X to be lower than I would like - especially when viewing DVDs or online movies. Is there a way in which I can adjust the system maximum volume output? Connecting external speakers is sometimes an annoyance.
I have recently put windows 7 professional on my aluminum macbook, installed all the drivers, and so forth. I hook up my macbook up to an external monitor, and use a logitech dinovo keyboard for a mac. However, when I am in windows 7, the function keys do not adjust volume, brightness, and any other of the functions.
I watched a video and it was very loud so I went to System Preferences and turned the sound down.But now I can't mute by clicking the F9 button as I normally can. I can mute by going to System Preferences but I don't want to do this.Before I changed the volume in System Preferences, the keyboard keys worked fine for volume adjustment. I could make it quieter, louder or mute.I have tried with checking and not checking the option to display volume on the screen (in System Preferences).
Info:MBA v 3.2, 256GB SSD, 2.13GHz, 4GB, Other OS, 10.6.8
is it just me or did my macbook's speakers get low? it seems like they aren't as loud as they used to be! did i perhaps mess with something? i went to the settings and checked the sound settings but everything there seems to be ok! i have the volume on my mac. all the way up, and itunes is also turned up!
Up until a few days ago my Creature external speakers worked fine on my early 2008 24" Imac. Now the sound is very low and nothing I have tried seems to affect it in a positive way. I have all the connections on the creatures correctly inserted. There is sound coming from them, but the volume is very low.
The volume quit working on my computers speakers. I try to hit the up volume and a greyed out speaker appears showing volume bar all the way up with a circle below it with a line through it?
I want to connect speakers and a headphone to my Imac at the same time.Since there is only one audio output in the imac, I need a audio splitter and I think I need a headphone splitter then?Now the problem is there is no volume control on my headphone and I want it at a different volume then my speakers, otherwise when I turn my speakers on and the headphones are still connected and I turn volume up loud it will ruin my headphone ( and I don't want my software volume almost down and my speaker control way up)Now I found this headphone splitter, but my question is, will the sound quality still be the same because I need the same sound quality. I know it's a difficult story,
Speakers are not muted, according to system profiler, they are connected. Won't let me turn them up or down, even though they are set to the highest setting. Basically the volume control is greyed out.
I have iTunes 10.6.1 (7) an Airport Extream Version 6.0 Airport Utility (600.92) That I use with two airport express stations, an Apple TV 2nd Generation with latest software up date. Also have Ipad 3rd Generation and two I phone 4's. Issue: After installing the latest Airport Utility software update I'm unable to connect to my remote speakers in iTunes. The speakers are visible in the pop up menu but iTunes times out when trying to connect. If I use remote to select Apple TV and then via Apple TV select my Computers Library I'm able to play music on the Apple TV / Home Speakers... but still not the Airport Express Stations.
When using remote on the iPhone or iPad the speakers are visible as well but I'm unable to select them... iTunes times out. I can steam music from that is on my iPhone or iPad to each individual speaker, but multiple speaker control is not available and the music from my library is not available. I believe the problem is in the Airplay feature of iTunes and I believe the problems arise when you install the latest version of Airport Utility. You can play on remote speakers, only one at a time, and only if you have the music on a stand alone device (iPhone or iPad)... in summary, bypass iTunes and you can be successful... marginally successful.
My new 25" HP 2510i monitor arrived today, all is good except from the speaker system, I can either have the iMac's built in speakers used or the built in monitor speakers used. Is it possible to combine them both and use both?
The monitor's audio interface connects to my iMac via the headphone jack on the back of the system.
This may or may not be a stupid proposition, but here it goes: I have a Klipsch Promedia GMX 2.1a speaker system which I like very much. However, I was wondering if I could replace the existing satellite speakers with bookshelf speakers (like Klipsch RB-10 s). I'm hoping this will work because I want to increase the audio output of my system without spending money on an amplifier.
Situation: no sound out from speakers in admin and user account and newly created account. Headphones work, startup chimes work on speakers.
Go to Sound in Preferences and only shows Digital Out for output. Should show Internal Speakers. Ran Diskwarrior and Applejack and zapped pram. Took mac apart and confirmed speakers wired correctly which is verified by the start up chimes being audible on the internal speakers. tested all accounts and created new account all with the same results. Did search of Google and MacRumor. Found one unaswered post indicating same problem. Had same problem with another macbook pro, ran same steps, take apart, confirm wiring setup, Diskwarriored, applejacked and zapped pram and it fixed the problem. I'm not sure what else to try. Did check Audio Midi Setup util and it also did not see the internal speakers.
I have a Mac Pro and not too long ago I swapped from a fat, heavy and filthy white Apple Keyboard to a new skinny silver one. I like it, and also love that the F7-9 Skip Back-Pause/Play-Skip Forward keys work for iTunes, even when another app is active (what's the word I'm looking for - in focus or whatever). But I use Optical output, so the volume keys (F10-12) don't do anything. I know that, when iTunes is the active app, I can command-+/- to change the volume, but I'd love to be able to map the F10-12 keys to do that - without having to have iTunes active (playing, but not the active window).
Recently, my newer (last year) iMac probably running 10.5 started speaking and wont shut up... there is no obvious way to turn it off. I usually figure problems out myself but there are no system preferences that effect it. I even changed the voice in preferences as a test and it is still the same guy reading everything clicked in all applications except when I am in system preferences so far. Usually when I run into a dead end like this there is some mystery key command that works... anyone know?I also noticed that some of the top line (f) keys are not doing what they are supposed to any longer as well... volume up opens the window for expose & spaces it looks like and does not control the volume monitor brightness controls are not working either... I went to the key and mouse preferences and set the key strokes to default and still the same.
I have my imac apart right now and replaced the internal HD as it was not working. I assume the problem is the new one is not formatted with OSX, so from the INSTALL CD I opened the disk utility and see only one drive called "MEDIA".? Or is that just part of the install dvd that looks like a HD? In the system it shows as not formatted, 0 bytes. When selected in Partition it says :
"This voume is the startup volume and cannot be erased. Size 7.1 GB The disk is not writable and cannot be partitioned"
So i guess thats not my new HD I am seeing? Other than that there is only the two OSX install CD icons.
I was wondering if anyone knows how to do this- it is a pita to adjust separate volume controls on everything. If I adjust the volume on the keyboard, the volume slider in itunes doe snot move. If I set the volume on itunes with a mouse, then come home and use the volume controls on my keyboard, I have to also manually adjust the slider in itunes. Anyway to link the two?
I recently decided to increase the volume of my bootcamp disk, which I had done in the past using a method which ultimately made the disk unrecognizable. This time around I used Winclone to create an image of my bootcamp disk. I was not sure exactly how Winclone worked and to be safe I decided to keep the Bootcamp disk I had, and I created a third partition of a larger volume to which I restored the bootcamp image. Everything worked fine obviously, and the image was restored correctly to the new larger volume. The dilemma is I had two bootcamp disks, so I erased the smaller volume because I no longer needed it. Currently I am trying to restore this empty space within the main disk to the Macintosh HD. Disk util looks like:
I know I can just create a backup of the macintosh HD, another image of the bootcamp disk, and format the disk and start over, but I am hoping there is an easier way to go about this; considering there has been a method engineered such that I can just drag that corner of the mac HD and voila I have instantly more storage after applying, it seems viable that there is something that can be done rather than formatting my disk, unless the necessity for that of course was overlooked.
Info: MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
So I'm trying to adjust the font in a PDF in Preview. I can't do it....is there a way? I also realized that I don't have Adobe....I have Adobe Digital for downloaded books but I guess that's all it's for.
I went online and all I can find is Adobe to buy.
So, finally my question....can I adjust the font in Preview? Zooming doesn't work for me...won't bore you with the reasons.
Or will I have to buy Adobe to get that function in PDF's?
If you can't tell I'm new to the Mac, coming over from Windows for 12 years!!
is it normal that I cant adjust the partition size from partitions on an external harddrive? one is for time machine, another is partitioned for mac, and a tird is NTFS. a want to enlarge the NTFS but seem to not be able to.
I recently bought an ACD which I hook up to my MacBook. I watch videos and movies on it late at night so instead of playing it through the speakers I prefer to play it through headphones so I don't keep everyone up.
This works great with iTunes. I plug them into my MacBook and off I go. For VLC, however, it STILL plays the audio through the speakers even though my headphones are plugged in.
How do I change it so the audio plays through the headphones when plugged in using VLC instead of the speakers. (Jeez, you'd think this would be basic functionality. >_>)
