MacBook Pro :: Why Won't Brand New Boot To An External Disk
Jun 29, 2012
why wont my brand new macbook pro boot to an external disk? I have the 10.7.4 on both. The MBP came with it so I installed it onto the hard drive i have been using the same way with an older macbook pro but the new MBP does not see the startup disk. So i installed the same version of the os onto the MBP by hooking it up to my imac as a target disk because it would not recognize the install usb stick. Now the brand new MBP doesnt start up
View 2 Replies
ADVERTISEMENT
Oct 1, 2010
is it possible to have boot camp and have the windows os stored on a usb/external hd?
View 2 Replies
View Related
Jun 17, 2009
I have an 08 mac dual quad and wanted to ask if i could boot my computer from an external instead of having the disc as an internal?
that way i can use the 4 bays for terra byte action and run a raid of sorts without having one bay for the OS.
also if i can do this could i also install boot camp on another external to run my boot camp partition from an external as well?
or can you run parallels or fusion from the same disc as the mac OS at the same time?
View 15 Replies
View Related
Jul 2, 2012
just came home from Apple Store today with new computer and superdrive, which is not showing up when plugged in. When I put a CD in it reads it for a few seconds then spits it out. I am on the road so getting to an Apple Store will not be easy for the next week.
Info:
MacBook Air (11-inch, Mid 2012), Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 16, 2012
I just purchased a LaCie triple interface (500GB disk to use as a bootable external drive to support our family's family of mac's, all running 10.6.8 including a 2006 Core Duo iMac, a 2007 Core2Duo iMac, a Core2Duo Mini, and a 2010 MacBook Pro.
The firewire drive does not appear as a bootable option on any of the computers, attached to either of the iMacs via the Firewire 400 port (through a 400 to 800 adaptor), or attached via the Firewire 800 port on the MBP. This is the profile of the LaCie via System Profiler on the iMac?
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Rugged FW USB3:
Manufacturer: LaCie
[code]....
View 3 Replies
View Related
Jul 18, 2010
I deleted my Boot Camp partition in Disk Utility (as usual, Windows wasn't working and wouldn't fix). I resized my Macintosh HD partition to cover the whole drive and repartitioned. Now Disk Utility says that the partition's capacity is 160 GB and that I've used 40 GB and that 70 GB is available. My Boot Camp partition was 50 GB. I've read that to fix it I have to boot from my install DVD, go to Disk Utility, set the number of partitions to one, and delete the entire drive so that there's zero data left. Then I'd reinstall OS X and restore from a Time Machine backup. As of now, I have no external hard drive.
View 2 Replies
View Related
Apr 5, 2009
Is there any way I can boot up my external hard drive as a start up disk along with my internal hard drive?
View 3 Replies
View Related
Feb 16, 2012
I've owned this iMac for less then 20 hours
Mac OSX 10.7.3
21.5"
2.5 GHz Intel Core i5
4 GB 1333 MHz DDR3 ram
"Mid 2011"
It was purchased brand new. I used it for one hour yesterday, run the set up, install updates. thats all I have done with it. Today I awake to it presenting a loading bar of some sort under the Apple logo and Spinning wheel. I researched the bar, and found that it was a progress bar for a disk check, and since it doesnt complete (I let it do its thing) something must be wrong, However when i run disk utility, it can find now error in the disk. but my sound and video play pack does not work unless i restart the machine. this seems like an unessecary process. what are the possible causes?
Info:
iMac, Mac OS X (10.7.3)
View 5 Replies
View Related
Jun 11, 2012
I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
Info:
MacBook, Mac OS X (10.5.6)
View 3 Replies
View Related
May 13, 2010
Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.
Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.
View 2 Replies
View Related
Nov 1, 2010
I have a MacBook from Christmas 2009. I'm very happy with it. I am using an external HD, a Western Digital Passport with 500 GB for my Time Machine backups. The MacBook seems to have a 250GB hard drive, but no firewire connection. So far I have used up about half of my WD Passport external with Time Machine backups. I have about 6500 photos and almost 12GB of iTunes music, and I don't want a catastrophic failure to cause me to lose it all. In addition to the Time Machine backup, I'm considering using Carbon Copy Clone with an additional external hard drive for a complete backup. I'm not very Mac or programming savvy, so I'm looking for an idiot proof method. What do you guys think of CCC, and what size/brand external HD do you recommend? I think CCC has to have an HFS+ formatted drive. I don't want to keep it connected all the time, but I would like to occasionally clone the MacBook harddrive so I always have a fairly current bootable backup.
View 6 Replies
View Related
Apr 30, 2012
I have a very large music library 500 GB on an external drive how do I get it on my brand new iMac intel
Info:
iMac, iOS 5.0.1
View 1 Replies
View Related
Mar 25, 2012
MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?
View 14 Replies
View Related
Oct 13, 2010
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
View 8 Replies
View Related
Feb 15, 2011
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies
View Related
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Sep 22, 2009
I have tried zapping the pram, nvram, unable to boot from a disk, tried safe mode, tried verbose, did the single user /sbin/fsck -fy several times and it came back with everything appears OK. Tried the hardware test & no trouble found, did the short & long test.The MacBook is a college kid (friend of my youngest) that dropped it off last night and I am stumped. I thought it was surely the HD but all the test say it is fine.I cannot get it to boot from a disk either.
View 1 Replies
View Related
Jun 4, 2014
i have a big problem with my MBP 13". I install Mac os x (try also Maveriks) on a HDD drive it works fine, but when i put this HDD inside (internal) it won't boot.
View 5 Replies
View Related
Dec 6, 2010
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry
2. No matter how many times I reformat it, it always fails
3. I tried one trick I googled - deleting the "inprogress" file - does NOT help
4. SMART status is verified
5. There are no problems if I verify/repair the disk.
View 2 Replies
View Related
Apr 11, 2010
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies
View Related
May 26, 2009
I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.
I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.
View 8 Replies
View Related
Jan 5, 2011
As I have a MBP 17" and a MBA Ultimate 11.6" I have copied all data that I need onto a 1 TB external disk and made 4 partitions on it, one for each type of data ( movies/music, data , software etc etc ). 1. I want to password lock/encrypt it yet be able to access it from both laptops as regular data would be.2. I want to create a backup of the 1 TB disk above, on to another 1 TB external disk and make it encrypted/password protected also. Maybe follow the partition structure maybe not, thats not paramount.What's the best way (apart from .dmg file) to achieve this given the data on disk in point 1 will change often as I create/edit more files.
View 8 Replies
View Related
Jan 23, 2009
Earlier tonight my Macbook crashed I went to restart and it crashed finally after several attempts I used my Mac OSX disk and was able to boot from the disk and then from there load Leopard,But my problem is that this is the only way to boot up(Macbook won't load on it's own).
View 5 Replies
View Related
May 21, 2012
just erased the hard drive to reload and sell the laptop and it will boot off the disk but not actually install? Continues to give me an error.
Info:
MacBook Pro, Mac OS X (10.5.1), 2008
View 6 Replies
View Related
May 27, 2012
I had been trying to cleanup my MacBook Pro as the disk was almost full. However I wasn't thinking tonight and downloaded my mail. When I tried to reboot my laptop, it crashed. I then tried to bring it up in Verbose Safe mode. It tells me the disk is full then turns itself off. Is there anyway I can bring it up in Safe mode long enough to delete some files?
I think I'm running OS X Lion but aren't 100% sure.
Info:
MacBook Pro
View 2 Replies
View Related
Dec 20, 2007
This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.
Information:
G5 Dual 2GHz
Mac OS X (10.4.3)
View 4 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Feb 15, 2011
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
View -1 Replies
View Related
Sep 7, 2009
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies
View Related
Oct 22, 2008
Can we target disk mode through usb 2.1 into the new MacBooks?
View 6 Replies
View Related
