Mac Pro :: Can You Put The Boot Disk As An External?

Jun 17, 2009

I have an 08 mac dual quad and wanted to ask if i could boot my computer from an external instead of having the disc as an internal?

that way i can use the 4 bays for terra byte action and run a raid of sorts without having one bay for the OS.

also if i can do this could i also install boot camp on another external to run my boot camp partition from an external as well?

or can you run parallels or fusion from the same disc as the mac OS at the same time?

View 15 Replies


ADVERTISEMENT

MacBook Pro :: Why Won't Brand New Boot To An External Disk

Jun 29, 2012

why wont my brand new macbook pro boot to an external disk?  I have the 10.7.4 on both.  The MBP came with it so I installed it onto the hard drive i have been using the same way with an older macbook pro but the new MBP does not see the startup disk.  So i installed the same version of the os onto the MBP by hooking it up to my imac as a target disk because it would not recognize the install usb stick.  Now the brand new MBP doesnt start up

View 2 Replies View Related

OS X V10.6 Snow Leopard :: Cannot Boot From External Firewire Disk

Jun 16, 2012

I just purchased a LaCie triple interface (500GB disk to use as a bootable external drive to support our family's family of mac's, all running 10.6.8 including a 2006 Core Duo iMac, a 2007 Core2Duo iMac, a Core2Duo Mini, and a 2010 MacBook Pro. 

The firewire drive does not appear as a bootable option on any of the computers, attached to either of the iMacs via the Firewire 400 port (through a 400 to 800 adaptor), or attached via the Firewire 800 port on the MBP. This is the profile of the LaCie via System Profiler on the iMac?

FireWire Bus:  
Maximum Speed:          Up to 400 Mb/sec  
Rugged FW USB3:  
Manufacturer:          LaCie

[code]....

View 3 Replies View Related

OS X :: Deleted Boot Camp Partition In Disk Utility - No External HD

Jul 18, 2010

I deleted my Boot Camp partition in Disk Utility (as usual, Windows wasn't working and wouldn't fix). I resized my Macintosh HD partition to cover the whole drive and repartitioned. Now Disk Utility says that the partition's capacity is 160 GB and that I've used 40 GB and that 70 GB is available. My Boot Camp partition was 50 GB. I've read that to fix it I have to boot from my install DVD, go to Disk Utility, set the number of partitions to one, and delete the entire drive so that there's zero data left. Then I'd reinstall OS X and restore from a Time Machine backup. As of now, I have no external hard drive.

View 2 Replies View Related

MacBook Pro :: Have Boot Camp And Having Windows Stored On Usb Or External Hard Disk?

Oct 1, 2010

is it possible to have boot camp and have the windows os stored on a usb/external hd?

View 2 Replies View Related

Hardware :: External Hard Drive As A Dual Boot Start Up Disk?

Apr 5, 2009

Is there any way I can boot up my external hard drive as a start up disk along with my internal hard drive?

View 3 Replies View Related

MacBook :: It Won't Boot After Trying To Repair With Disk Utility, Cannot Boot In Safe Mode

Jun 11, 2012

I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.  

I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc". 

I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy. 

Info:
MacBook, Mac OS X (10.5.6)

View 3 Replies View Related

OS X :: Unable;e To Boot From Internal Hard Drive / Use Disk Warrior To Repair Disk?

Apr 11, 2010

I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.

View 3 Replies View Related

Windows On Mac :: Creating Window 7 Boot Disk W/Disk Utility

May 26, 2009

I'm currently in the process of trying to install Win7 on my Macbook Pro (purchased July '07) using an ISO burned to a DVD with Disk Utility. Unfortunately, the DVD isn't bootable, and while the symptoms match what's in this blog post, the author's solution involved using a Windows-only program.

I'd like to know if it's possible to re-burn the ISO without the version number in the filenames as in the original solution, but with Disk Utility or something else that a Mac can use.

View 8 Replies View Related

OS X :: Encrypting External Disk And Backup On Second External Disk

Jan 5, 2011

As I have a MBP 17" and a MBA Ultimate 11.6" I have copied all data that I need onto a 1 TB external disk and made 4 partitions on it, one for each type of data ( movies/music, data , software etc etc ). 1. I want to password lock/encrypt it yet be able to access it from both laptops as regular data would be.2. I want to create a backup of the 1 TB disk above, on to another 1 TB external disk and make it encrypted/password protected also. Maybe follow the partition structure maybe not, thats not paramount.What's the best way (apart from .dmg file) to achieve this given the data on disk in point 1 will change often as I create/edit more files.

View 8 Replies View Related

MacBook Pro :: Using Disk Warrior 4.2 Boot DVD To Boot System?

May 13, 2010

Just an FYI. Tech Support at Allsoft states The Disk Warrior 4.2 Boot DVD will not Boot the new 2010 MBP's. They are waiting for information (software) from Apple.

Will need to use Target Mode or another Mac connected with Firewire till then. Boot from that then run DW from your MBP.

View 2 Replies View Related

OS X V10.7 Lion :: Apple Macbook Boot It From Usb Or Firewire External HDD Or Usb Stick, Which Of 3 Better Must Boot

Mar 25, 2012

MacBook Pro 15" (15-inch Core 2 Duo) late 2006 this apple macbook boot lion from usb or firewire ext hdd or usb stick which of 3 better must boot Lion on ext device? or none at all?

View 14 Replies View Related

Power Mac G5 :: Cannot Boot From DVDs - Defaults To External FW Boot Drive With 10.3.x

Dec 20, 2007

This is bad and old, and full of lessons about backing up. Anyway, internal boot drive crashed a week ago, and internal optical drive is busted. New external LaCie dvd burner works fine, but all attempts to start up from Tiger, Leopard and Diskwarrior installation disks just end up back in OS10.3 on my external LaCie FW drive. I've tried many things: unplugged everything; switched external LaCie to USB (wouldn't boot), unplugged power from internal optical drive so Mac wouldn't look there first (somebody suggested that). Attempts to start up installers from mounted DVDs result in installer screen with restart button, which, when clicked on, results in... you guessed it... boot back to dreaded 10.3 system. Night owls and westcoasters, I am up for hours yet, pulling hair.

Information:
G5 Dual 2GHz
Mac OS X (10.4.3)

View 4 Replies View Related

MacBook Pro :: Boot From External Firewire DVD / Optibay-Boot Camp?

Oct 13, 2010

Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...

Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.

Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...

View 8 Replies View Related

OS X V10.7 Lion :: Disk Utility Can't Repair Disk (1 Partition) On External Hard Drive

Apr 24, 2012

I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper! 

Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'.  And it needs to be reformatted.  It's become a read only disk.  When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question.  I also noticed that there are a lot of files with "date created" being the same date in 1969!  These files may be letters I've written or photo's I added to that partition within the last few years. 

I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure.  Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state!  Does this sound right, that I have to reformat the entire external hard drive?  And how do I get the read-only files back to their original state.

Info:
iMac, Mac OS X (10.7.3)

View 3 Replies View Related

OS X Leopard :: Disk Write Cache Corruption On External Hard Disk?

Feb 15, 2011

Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.

Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..

This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.

I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.

On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.

I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.

I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.

Information:
MacBook Pro
Mac OS X (10.5.8)

View -1 Replies View Related

MacBook Pro :: Unable To Check External Hard Disk / Cannot Find The Disk

Feb 15, 2011

I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.

View -1 Replies View Related

MacBook Pro :: External Hard Drive - Disk Utility Can't Repair Disk

Jun 27, 2014

I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:

Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.

Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. 

Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive? 

I have a Macbook PRO late 2011 running OS X Mavericks.

View 1 Replies View Related

OS X :: External Disk Not Showing Up In Disk Utility - Erase Partition

Sep 7, 2009

Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.

View 4 Replies View Related

OS X :: Disk Utility Screwed Up External USB Hard Disk

Aug 6, 2010

I have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............

View 2 Replies View Related

MacBook :: Won't Boot Up / Cannot Get It To Boot From A Disk Either?

Sep 22, 2009

I have tried zapping the pram, nvram, unable to boot from a disk, tried safe mode, tried verbose, did the single user /sbin/fsck -fy several times and it came back with everything appears OK. Tried the hardware test & no trouble found, did the short & long test.The MacBook is a college kid (friend of my youngest) that dropped it off last night and I am stumped. I thought it was surely the HD but all the test say it is fine.I cannot get it to boot from a disk either.

View 1 Replies View Related

MacBook Pro :: OS X Boot From External HDD But Won't Boot In Internal HDD

Jun 4, 2014

i have a big problem with my MBP 13". I install Mac os x (try also Maveriks) on a HDD drive it works fine, but when i put this HDD inside (internal) it won't boot.

View 5 Replies View Related

OS X :: Unable To Boot From Disk

Sep 23, 2010

So I have been running into a bunch of weird issues lately (got errors on emptying the trash, FCP is acting all crashy, couldn't unmount an internal disk to format it, etc) so I wanted to run the hardware test that is on the installer disk that came with my MP. Problem is, the machine won't boot from the disk. If I boot holding down the D key it boots to a grey screen and a dialog box pops up for a second and then *poof* the computer shuts down. It happens so quick there is literally no chance to read what it says. If I boot holding down option and try to click the install disk I immediately hang, the mouse doesn't respond anymore and I'm screwed and need to hard restart.

So I figured "hey I got a backup, I'll just reinstall OS X". Nope, still won't boot using the "install Mac OS X" from the disk. I click restart and I just get a grey screen again and nothing happens. I hear the drive spin up and then spin down and silence. Everything is disconnected from the computer except for my screen my keyboard and mouse.

Everything is up to date. Zapped pram, repaired permission and ran cron scripts via Onyx so I am at a loss what to do now. This is troubling because even if I have a problem I have no way of reinstalling the OS. I can work because the computer is working almost normally but this worries me.

This is a new MP 2.8.

Everything has been working tip top until this morning.

EDIT - I bought SL for my MBP so I have the retail disk. I was able to boot from that but it doesn't have the hardware test so it still looks like I am SOL for now.

View 1 Replies View Related

OS X :: Can't Boot Off The Install Disk?

Oct 3, 2010

So I restarted, hit option until "Macintosh HD" showed up. Then I hit "c" and "Mac OS X Install Disc" showed up. So far so good.

I then selected the CD, and hit enter. It started to boot up and my cd drive started to make whirring noises, so I knew it was all good. And then, it went into the grey screen with the Apple logo in the middle. However, with it taking a long time, I went for my usual jog (it was my jogging time anyways). But when I came back (over an hour later) it was still on the grey screen with the apple logo.

View 7 Replies View Related

MacBook :: Only Boot Up With Disk.

Jan 23, 2009

Earlier tonight my Macbook crashed I went to restart and it crashed finally after several attempts I used my Mac OSX disk and was able to boot from the disk and then from there load Leopard,But my problem is that this is the only way to boot up(Macbook won't load on it's own).

View 5 Replies View Related

OS X :: Change Boot Disk On Mac Pro?

Feb 5, 2010

I have a Mac Pro in which i installed a 300 gig velociraptor along with the stock 320 gig HD. It would obviously make more sense to use this Velociraptor as the boot disk, so how would I transfer the info from the 320 gig hard drive to the velociraptor and change it to be the boot disk?

View 1 Replies View Related

MacBook Pro :: It Won't Boot From Disk

May 21, 2012

just erased the hard drive to reload and sell the laptop and it will boot off the disk but not actually install? Continues to give me an error.

Info:
MacBook Pro, Mac OS X (10.5.1), 2008

View 6 Replies View Related

PowerPC :: Boot Up Disk Does Not Work With Mac

Jan 23, 2008

Today I accidentally turned off my iMac by mistake (pressed off button twice while in sleep mode). And when I try to boot it when it comes to the little mac logo it says "this boot up disk does not work with this mac please restart I press restart and it says the same thing, also when it turned off with an os 9 in it and when I booted it I definatly did not press down c. I think it maybe the hd or is it possible to change boot priority?

View 16 Replies View Related

Mac Pro :: Want To Install 2x Velociraptors For Boot Disk?

Jun 28, 2008

Ok, my WD Raptor is both getting too small, and too slow (long in the teeth) so I sunk down for 2xVelociraptors to use for my boot in RAID 0..

I know how to add drives and do RAID in terms of adding drives for storage, but how can I migrate my OS X, Applications, and Preferences to a new boot drive, much less a RAID 0?

do I need to first install the disks into my case and format them for RAID 0, then install OS X as a boot disk on them, the lastly copy over my Applications folder, Library and Users folder?

View 3 Replies View Related

PowerPC :: Cannot Boot From CD-R (Disk Ejected)

Feb 7, 2009

I wrote a disk image of Tiger I acquired legally! to CD-R (I got a DVD with the CD disk images on it from a friend who has them) using MacDrive on my PC as the disk drive I put in my eMac does not have burning enabled for w/e reason. So, yes, I put the CD-R into my eMac, it shows up on the desktop and it then asks me to restart my Mac to continue with installation, on boot it gets to the Apple, the disk drive ejects and it boots into Panther.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved