MacBook Pro :: Things Not To Do When Installing An Optibay - Stripped Screws
Jul 30, 2010
Today I received my Optibay-clone and hard drive, and tried to install it. Unfortunately, I messed it up and don't think I can finish the job now. Using driver bits supplied by ifixit, I managed to ruin the screws in step 10 of this guide: [URL] Tight, tiny screws are the bane of my existence. I don't understand what on earth I was supposed to do to remove these particular screws, when all the other screws in the computer didn't pose a problem at all. See awesome attached pics of mutilated screw, and the 10 or so different Phillips screwdrivers, none of which managed to do the job. So, am I completely screwed, or does someone out there have a magnificent suggestion to aid me in my plight?
View 7 Replies
ADVERTISEMENT
Nov 4, 2009
A few weeks back I spilled a glass of wine on my non-unibody, but new, MacBook pro while it was turned on (I know; no good). i let it dry for a few days but still, no life. i decided to open the sucker up to investigate and had successfully taken out the battery and one of the fans before the trouble began. i was using a #000 philips head screwdriver, and most of the screws in the logic board came right out, but some (the same size as the others) wouldn't budge. now i'm not sure if i should just put the thing back together and send it to apple or try to find a different size screwdriver and forge ahead. i know the problem in terms of moisture is on the other side of that logic board (and hard drive, which won't budge either)
View 1 Replies
View Related
Aug 28, 2009
I took off the back cover of my MBP (early 2009) and the screws will not go all the way down. I think they are stripped. Is there anyway to use a tap and die set to fix the threads? Has anyone had a problem like mine? I had to take the cover off to check my memory (that is a whole other post) but when I put the cover back on the little screws would not go in very far. The just stick out of the case and will not go in any further. I could "make" them go down, but I do not think that would be wise to force the screws into place, because they may not come back out if the laptop ever needs to be worked on again. does removing your back cover on a MBP void your warranty? I just had a genius tell me that becasue I took the back cover off I voided my warranty, but they are going to replace my memory
View 14 Replies
View Related
Oct 8, 2009
I tried changing the hard drive on my MBP, only to totally strip the screws on the hard drive bar. Took it to Apple, they are happy to repair it, they said they may have to break the hard drive bar in order to get it out, but no problem. However, my local Apple Store is closed for a refitting until 30/10/09 and they want �48 in order to do the repair. That leaves a slightly bitter taste in my mouth considering it's such a small job. I'm wondering if anyone has had any experience with 'screw extractors'? They are little screw bits that bite into the screw in order to turn it. They are about �9 for a set so could save me a bit of cash. To be honest, it's not the money that's the problem, I don't want to wait another 3 weeks. I'm not really wanting to drill into the screw or glue a hex key, so the 'screw extractor' is the only option really. Just wondered if anyone can vouch for these little extractors. If not, then I'll suck it up and Apple loose on my machine.
View 16 Replies
View Related
Jul 9, 2010
Anywhere to find replacements? It's the two top screws holding the bracket in place. How am I going to get these things out? I am not sure why they are so tight this time.
View 7 Replies
View Related
Dec 3, 2009
well while attempting to replace my hard drive I like many other people I completely stripped out the two screws on the hard drive bracket on my 15" PowerBook G4. They are very small screws, and I thought I had the correct size philips but apparently not. I tried to cut a slot in one of them with a Dremel but that only destroyed the entire head of the screw and sent bits of shavings everywhere. What can I do to get these screws out? Should I drill them out? I just can't think of any other way to get them out when one's stripped and one is worse than stripped. Is it possible to get replacements?
View 4 Replies
View Related
Jul 1, 2009
I was replacing my RAM y'day for my 13inch macpro, opening the back cover was very easy, but when I tried putting it back, two of the small screws won't tighten fully. A small part of the screw (25%) wont screw in completely. I can sense the the screw projection when I feel it with fingers. I tried the same angle as shown in the manual to unscrew and screw. And I took spl care to use the same screws for the same holes. I tried to fix it for 1hr, but the two small screws never fits.
View 6 Replies
View Related
Aug 5, 2009
I'm literally two steps away from installing a new hard drive and I can't get the torx screws out. Is it absolutely vital I take them out and put them in the new hard drive?
View 6 Replies
View Related
Apr 26, 2010
I've got an SSD in the HDD space, and a newmodeus HDD bay in the optical drive (same thing as the optibay). So what I was thinking was to install windows in a partition on the 500gb HDD. My SSD is only 80GB so I wanted to save space on that. Here is what I have tried:
Macbook set up with SDD and HDD, no optical drive.
Bootcamp will not let me install windows using an ISO image, needs a CD to install.
So I put my HDD in the HDD bay and put the optical drive back in. I then started up the macbook using a firewire drive (HDD has no OS on it, only the SDD does). Bootcamp then tells me it can't partition an external disk and I have to boot up using an internal disk (even though I WANT to partition the internal disk... bootcamp wouldnt let me get to that option running off a firewire drive). It seems like the only thing left is to just install windows on an SSD partition.
View 2 Replies
View Related
May 19, 2010
think this guide will be useful to anyone looking to install an SSD to accompany a larger capacity drive but is a little unsure how to tackle the cloning/file organization side of things with two drives.
View 1 Replies
View Related
Sep 11, 2009
I was trying to do a memory upgrade the other day, and tried to take the wrong screw off. I went to try to screw it out, but the screw stripped. How can I get this thing removed and replace it with a new one? Or should I just take it to the local genius bar?
View 1 Replies
View Related
Dec 16, 2009
I have a mid-2006 Macbook and have never tried to do any tinkering on the inside except for installing some RAM. Whenever I had any trouble in the past, I took the machine into the Apple Store. Now that my Applecare warranty is up, I figured that I can crack it open to do some repairs regarding my fan without voiding my warranty. Alas, it seems that someone on Apple's end stripped a screw / put it in improperly. Now, I cannot get it out. The screw in question is the center screw in this picture (from iFixit, not my Macbook): All other screws in the tear down came out easily except for this one. Dammit. What should I do? It is too late to point fingers at Apple because I have no proof that I wasn't the numbskill who did this. It is just such a small screw... I'd just like to remove it somehow
View 14 Replies
View Related
Aug 27, 2010
The screws that hold the battery in place (Triwing Ones) One of them is stripped on my MBP. I ordered some new ones and they should be arriving next week. Does anyone have an idea how to get the stripped one out? I have tried pliers but they don't seem to grip the screw to be able to turn it. This is the screw I mean.
View 14 Replies
View Related
Feb 7, 2012
Recently I up/downgraded from a 2010 17" Macbook Pro to a 2011 15" Macbook Pro. I had previously swapped the old hard drive in the 17" to an SSD using the OWC data doubler kit. Now that I moved on to the 15", I wanted to move my SSD over to the new Macbook Pro.
During the process opening the new MacBook and unscrewing a two of the screws around the optical drive, both of the screws became stripped on the module the covers the optical drive. I have to be honest and say that they are pretty badly striped at this point. I've read a handful of articles online with many different possible solutions on removing the stripped screw, but none of which seem to work nor do I want to cause any further or possible permanent damage, I do have AppleCare on the machine, but I wasn't sure if modifications and upgrades such as this where covered.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 20, 2010
So I was taking apart my MBP to reapply thermal paste on the chips and I accidentally stripped one of the screws holding the super drive to the chassis. It is a 3.3mm Phillips screw that is on the bottom right of the super drive if you are facing the screen when it is upright. The screw is heavily stripped as looks nothing like a + now. Does anyone have any ideas as to what I can do to remove it without damaging the rest of my MBP? I have 3 sets of high precision tools and they all are having a hard time with the screws on my MBP. My local Apple store was nice enough to order some new screws for me which i will be getting in a few days.
View 10 Replies
View Related
Oct 28, 2009
The MBP has one expresscard slot. So if you use an eSata adapter (even if it has dual eSATA ports) it would only have one eSATA channel And that would be limited further by the express card slot and more still by the type of card (make, model, etc..). My question is: with Barefeats claiming even the best eSATA card for a MBP being 200MB/s (even if you claim less) using a dual eSATA RAID connection for a stripped array would be limited to 100MB/s per port. Is this correct? Because I'm trying to understand this to see if it's worth building a RAID setup for my MBP when I'm home.
I've asked this numorous times and get helpful advice but not addressng this specific and fundamental fact. I am not interested in FW800 because I want the fastest I can get but want it to make sense. I would also reask my other questions about my situation but this question comes first.
View 8 Replies
View Related
Sep 19, 2010
I am new to macs. I just bought a used macbook air, and realized 3 screws were missing from the bottom, I called all the local repair shops, no one has screws for it. I would really like to get the screws. Longer ones by the fan I am more concerned about, where could I order them from without getting a while set for like $40? It is out of warranty so apple will not give me the screws.
View 3 Replies
View Related
Jan 10, 2011
I own a 15 inch late 2008 unibody MacBook Pro. I have recently discovered that one of the screws on the bottom of it is missing. I am not sure where I can buy some new screws for it. Does anyone have any insight into this?
View 2 Replies
View Related
Dec 7, 2010
I recently upgraded my stock HDD to a SSD and moved the HDD into the optibay. I was hoping that using the command pmset -a disksleep 1 would mean the 5400rpm drive would go to sleep after 1 minute of inactivity and I would get nice SSD silence It usually does but something is making it spin up again all the time. I am hardly running anything on my MBP.
View 5 Replies
View Related
Aug 16, 2010
I think this has been discussed but can't find it. In a SSD+HDD setup, should I put the SSD in the primary bay or in the optibay (replacing the superdrive). I believe there is a setup that has issues with sleep or motion sensor whatever, but I can't recall what the preferred setup is.
View 8 Replies
View Related
Sep 8, 2010
I'm in the process of installing an Optibay in my Macbook Pro and have run into 3 really tight screws. They are the 3.3mm Philips that are used to mount the SuperDrive and Bluetooth board. The one on the Bluetooth came out easy but the other three are really tight. I've used the Philips screw drive that came with the Optibay as well as another screwdriver but none of them budge the screws.
Anyone have any tips or special method of removing those screws?
View 21 Replies
View Related
Mar 3, 2010
I was just wondering what is the best screw driver set for removing the screws from the late 2009 macbook pro unibody?
View 10 Replies
View Related
Apr 17, 2010
It seems that i cannot open the bottom cover after getting all the screws off,
View 8 Replies
View Related
May 28, 2010
I slipped up a few times and caused hairline scratches on the underside plate of my 13" MBP when I installed my Momentus XT (which I am now returning and getting X25-M). My heart dropped when I heard these screeching noises, but it doesn't look too bad and hopefully eliminates the OCD I tend to have with electronics.
View 12 Replies
View Related
Jul 22, 2010
I was woundering if anyone know where i can buy some screws for the bottom of my macbook pro i7 15". I lost one screw when replacing HD and memory. Everywhere I see online wants to sell whole macbook pro screw sets. I only need 1 or maybe anther for a backup. Don't want to spend 50bucks on a set of screws just to use 1.
View 4 Replies
View Related
Sep 15, 2010
I'm using a Corsair 120 GB Force SSD, a MCE OptiBay Kit, and a Hitachi 500 GB 7200 rpm drive. Everything works great when the SSD is in the hard drive bay, and the Hitachi is in the OptiBay. I'd prefer to swap the arrangement so the Hitachi can be protected by the sudden motion sensor, but when the SSD is in the OptiBay OS X won't recognize it. I've tried booting from the install disc to use Disk Utility, but it only shows the Hitachi drive as if the SSD isn't in the machine. I've throughly checked the installation; it appears correct, and as I said everything works fine with the drives swapped. I've also tried resetting the PRAM and the SMC, per the instructions in Apple's KB.
View 6 Replies
View Related
Oct 4, 2010
I am looking for optibay recommendations for my MBP 17" mid-2010. I am not sure which one to get. MCE offers one, which I have looked at, but they are pretty pricy at almost 100 bucks. Then I saw another website, [URL] selling optical bay caddies for almost half that (~50 dollar range); and lastly even some on eBay for the 12$ range from US sellers.
View 7 Replies
View Related
Dec 23, 2010
In need of a good video guide so i can get my optibay installed! I ordered the one from SMK something on ebay as per recommendations on searching this forum.
View 3 Replies
View Related
Dec 30, 2010
I have an SSD in place of the usual hard disk my MBP 13" came with to which i placed in the optibay. Since i did this (yesterday) ive noticed how noisy the drive is over just using the SSD alone.
Is there a way to either powerdown the optibay drive or 'eject' it when not in use for silence and prolonged battery life? Would you recommend it? Most of the time i will just use it as a netbook unless i download media to the optibay.
View 1 Replies
View Related
Apr 3, 2009
This is the future home of the optibay thorough guide.
First of, your here to add a second SSD/HDD to your notebook computer.
This article will cover your many issues / install problems / choices to me made:
1.1 - What laptop have
1.2 - What options do i have
1.3 - Installation and Setup
1.4 - RAID Arrays & Possible Issues
1.5 - Bootcamp !
View 24 Replies
View Related
