I connot burn a DVD. I get the message "The burn to the HL-DT-ST DVDRW GS23N drive failed. The burn failed because of a medium write error." I re-booted, tried different brands of DVDs and slowed the burn speed with no results.
Info:
MacBook Pro, Mac OS X (10.6.8)
I keep trying to burn a CD-R, and every time itunes stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome.
View 24 Replies View Relatedall of a sudden a little while ago (after some apple update, don't remember which tbo) i cannot burn any media, well, 98% of the time.. It starts up and then instnaly goes to finishing burn, and spits it out with a "fail burn because of a medium write error". This happens with 2 brans of media i have, both of which worked flawlessly before, and popcorn, toast as well as trying disc utility. i need to burn dvds for work and so on, but can no longer.
View 24 Replies View RelatedWhat does a medium write error mean, when trying to burn a cd?
Info:
MacBook Pro, Mac OS X (10.6.8)
i'm trying to burn a Windows 7 ISO my brother got from some ACM subscription thing. Anyway, every time i try to burn it, it says "Unable to burn "(cd name)". (The burn failed because of a medium write error.)". Why is this happening? Is it the superdrive or the DVD-Rs? My computer is the Macbook pro with 2.4GHz intel core 2 duo cpu and with 2GB of 676MHz DDR2 SDRAM. The DVD-Rs i'm trying to use are Sony branded.
View 6 Replies View RelatedEverytime I try to burn a disc, I keep getting the message "The attempt to burn a CD failed.The burn failed because of a medium write error".
Info:
MacBook, Mac OS X (10.5.8)
I have one of the older macbooks [the ones that were given out during summer '07, that came with the free ipod nano], and it used to burn cds fine but today I tried inserting a cd and it burned three songs and then said burn medium error. now when i put in a cd there is some scratching and whizzing and other random noises, and after a few minutes it spits it out without asking what I want to do with it.
View 1 Replies View RelatedI went to burn a CD today and continue to get the error message:
Sense key=medium error
Sense code= OX73, OX03
I had this problem before but thought it was a bad disk, when I would put another one in it would burn fine.
When I went to burn a new one today, using the same disks that I previously used I would get the above error. I am using Toast Titanium 5.2, Sony discs.
I cannot succesfully burn a DVD on my MacBook Pro - just keep getting an error message. What is wrong please?
View 1 Replies View RelatedI'm trying to burn some data using DVD+R DL using my 17in MBP w/New Toast Titanium.. Unfortunately, its giving me an error and can not burn it. Anyone experienced this issue? Any solution to this problem??
I have the following hardware: MATSHITA DVD-R UJ-846
last week i tried burning a dvd using roxio toast, but before it began to burn it says the following error: the drive reported an error: sense key = medium error sence code = 0x73, 0x03 i tried to use another dvd, but it is saying the same error (i have been using the same brand of dvd before but never encountered such problems), so tried to restart, and it proceeded to burn, no more errors, so i thought it was only a one time thing, so today, i tried burning again, the same thing happen, the same error, i tried 4 dvd's but the same error keeps on happening, but when i restart the macbook pro, it would proceed to burn with no errors. i wonder what seems to be the problem? my dvd drive or the software? anyone encountered the same problem before?
View 1 Replies View RelatedI have a Late 09 15" MBP and a WD 1TB external HD. I've never had a problem until now. I start up the hard drive, then it loads up fine and the Mac recognizes it just fine. As soon as I try to copy something - doesn't matter how big it is - I get an error and at the end it says "(Error code - 36)". It just says the file cannot be read or written. Weird thing is I can access everything on the hard drive. Anyone have any tips before I try reformatting the HD?
View 7 Replies View RelatedI'm quite new to Mac, and although everything is pretty clear, I haven't yet figured out how to burn a DVD. Everytime I try, it'll give an error 0x8002006E and stop burning.
- Reading is and has always been fine.
- I'm using Philips DVD-R discs.
- I'm on a white 2Ghz MacBook It's supposed to be able to burn DVD-R, right?
I have tried to do it from the finder, and creating a disc image, and burning it from the disk utility.
1) I had some problems after changing my acct. name, then changing it back again. I thought it was all sorted out, but then started getting an error message when I try to rip CDs in iTunes: You don't have write access for your iTunes Media folder or a folder within it. To change I tried Get Info & have RW permission, so I don't know what to do about that. Other than ripping CDs, iTunes seemed to be working fine however after a week of the above problem, it has developed something new that may be related. I can no longer use Get Info within iTunes to correct or add to entries about the albums like composer, tracks, disk, etc Perhaps that is another RW permission issue.
View 2 Replies View RelatedI took the advice of people online and created a sparse image file as a way of password protecting folders on my hard drive. Worked well for a while. These days, when I try to add or delete files from that sparse image, I get error 61 code. Why can't I write/delete from that mounted image anymore?
View 4 Replies View RelatedThe one response I had was: 'alex try putting your mac os cd in and restart the system holding down the letter d key and let me know what happens.' unfortunately I can't find my system disc... will I need to buy a new one? here's a the problem: I have a PPC G5 iMac 2.1GHz, 1.5GB. The Internal Hard drive is 250GB in total and partitioned into 4 sections. After working fine for ages I suddenly found I can't copy files into one of the partitions. Initially I got an error message saying: "DS_store could not be tead or written. (Error code 36)" I used Disk Utility to clean up the hard drive. Which didn't help. Got a copy of Disk Warrior(4.1) to try a more effective clean up. There were a few errors that found and fixed, but i still got the same error message. Then found a utility called DS_Store Cleaner to try and force it to remake the DS_Store files. This got rd of the DS_Store message but I'm still left with another error 36 message and still unable to properly copy. The message then said: "The Finder cannot complete the operation because some data in "example file.doc" could not be read or written. (Error code -36).
I have also got hold of a copy of techtool pro (4.6.1) and run everything - basic, intermediate and advance scans. Everything (aside from a few minor errors on other partitions - which it cleared up easily) was fine, that partition showed no errors at all. I didn't do the full tests on the system partition though as I haven't used the e-drive function yet. The problem has been ongoing since late March.Just today I found the same problem in another of my partitions: "The Finder cannot complete the operation because some data in "example file.doc" could not be read or written. (Error code -36).This happens when trying to copy to either of those partitions or trying to save anything to either of them.What might be causing this and what should I do next? with the first partition to have problems I am unable to copy/write any file size (eg KB size files) with the most recent partition I found I could copy a 2.3MB Jpeg. The problem occured when I tried to copy a 680MB .mov file (there was enough space - about 1.8GB)
MAC error 0x80020022 and 0x8002006D; trying to burn DVD on G4 powerpc (2002). OS 10.4.11 tiger. The two different errors come up at different tries of burning. amount being burned is about 4.2 Gigs on 4.7 gig disks, same error received after reducing size. Cleaning laser head by first using dvd cleaner disk then tried removing dvd and found it looking vary clean. used Isopropyl small amount on Q-tip. Same error. Tried using Onyk to remove cashes - that screwed me up a bit getting DSL back up. Tried new install of OS 10.4 and then rebuilding back to 10.4.11. I am using the MAC burning software as I dumped iDVD a ways back, I found that iDVD did not load up with the reinstall but I don't think that is relevant for burning. I can burn CD with no problem, and I can read both CD and DVD no problem. My DVD are kept in dark and a drawer away from heat. I do not find a specific Apple.plist in Library that might point to this dvd burning issue. so far on the internet have found no one solving this issue but the problems seem common among many different mac computers and OS.
hardware:
pioneer dvd-rw dvr-104
firm; a227
interconnect; atapi
burn support: yes
cache 2000 kb
reads dvd: yes
i have just started to get the error code 0x80020063 after burning dvd saying disc can not be burned and spits cd out of my mac
put it in the pc the disk is named and content is there put disk in mac it cant be seen anny clue to what is going on and how to fix it
Info:
iphoto 09, Mac OS X (10.6.4)
I have a config file, /etc/my.cnf that has permissions set via the finder gui to have read/write for anyone that's an "admin". My user is an admin (turns out I'm the only user as well), but when I open this file (it's plain text) in text edit it gives me an error on save saying that I don't have permissions for the folder that it's in. I can, however, use nano via the terminal and modify the file without any issues. I don't want to set read/write permissions on /etc to everyone, so how do I make it so TextEdit (and thus other programs having the same problem) can write to that file?
View 6 Replies View RelatedI have an iMac G5. I bought a stack of 50 DVD recordable. My DVDs burn fine about half the time, but for the other half I get the dreaded error code 0x80020022. I close all other applications when burning, but this doesn't seem to help or predict any success.
View 7 Replies View RelatedHey there! I don't seem to get through this Issue. I was trying to burn content to a Disc and it failed with the error code 0x8002006E, while the process was almost complete. I came across a few forums and nothing helped much to resolve this problem. Is there someone who knows the exact cause? Is this is a known-issue or anything already being addressed by Apple? Or a work-around to get this resolved? because i also read (did not try) that no third-party applications, as an alternative, solved this Issue. Disappointed! Help!  Model: iMac (21.5-inch, Mid 2011) OS: Lion OS X 10.7.4 I have the latest software updates and Firmware updates installed. Â
Info:
iMac, Mac OS X (10.7.4), Latest Firmware Updates patched
Shortly before switching to Tiger, I was having problems burning DVD's. I noticed it first with toast, but found that it also was happening with the onboard burning software for Mac OS X. Every time I tried burning, it would start into the burn and then give me this error: Sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D). I did a hardware test, reinstalled system software, and searched all over Google for any possible solutions. I found tons of people with the same problems, but everyone's solutions seemed to differ, and non seemed to work conclusively.
Some said that the lazer was having calibration problems and suggested using a cleaning DVD. Others said that if I created a new user and switched, then it would work. I tried that, and it just got worse. Others said that the media was not good but I've burned with the exact same media in the recent past, and it worked just fine then. Why would it stop accepting a certain type of media all of the sudden. Besides. My co-workers have the same computers, and they can burn just fine. Do I need a new drive, or is it just a simple software problem? CDs burn fine, but no DVD-Rs.
I have a Macbook Pro and I am trying to burn a dvd. From a movie I created in iMovie. I exported the movie, in a couple different methods. But I can't get the dvd to burn. "error code 0x80020022". I can burn cds successfully and I am almost 100% positive this mac can burn dvd's. I don't know what to do.
View 1 Replies View RelatedWhen i start and work with Logic Pro, it freezes after a while and there is no other way, but to force shutdown.I searched for some crash reports but i couldn't find one so i made screenshots of the terminal..I read on the internet some people had the same problem but with other programs, so i'm pretty sure that "Logic Pro caught burning CPU" is the problem. I got this problem since Mavericks 10.9.3, didn't have this with Snow Lion.Â
View 10 Replies View RelatedWe're having trouble with a Time Machine backup. Twice in the last three days, the backups failed with the error message that the backup disk image is already in use.I noticed that the partition containing the backup sparse bundle is mounted twice in /Volumes -- /Volumes/X and /Volumes/X-1. The error message refers to /Volumes/X-2.The icon that appears on the desktop has not cleared as if it's still doing a backup.Looking at the sparsebundle directly gives me the "verificationstate" as 1 -- I recall reading that this is supposed to 0. Other values:
verificationdate == 2012-06-05, and VerificationExtendedSkip == false.Note that the backup drive is attached to another Mac still running Leopard. This is run fine for years over a gigabit network.
Info:
Mac Pro, Mac OS X (10.6.8)
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error."What does this mean and how do I fix it?
Info:
iMac, Mac OS X (10.6.7), With Snow Leopard
I miss out on the beta testing for Diablo 3 and i would like to know if it is possible to run Diablo 3 in Medium or High setting. Below are my Macbook Specs. 13-inch: 2.4 GHz2.4GHz dual-coreIntel Core i58GB 1333MHz500GB 5400-rpm1Intel HD Graphics 3000Â
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I'm wanting to order a custom laptop messenger from timbuk2 here, but I don't know what size will fit a current unibody 17 inch MBP. According to the dimensions listed by apple here, the medium would bag would fit it fine. On timbuk2's site the large says it fits most 17 inch laptops, but the true width is too big. However, the true width on the medium bag would seem to fit. Does anybody use the medium timbuk2 messenger bag for their 17 inch MBP?
I've searched and have found a lot of people using the medium bag for their 15 inch MBP and they say it fits "perfect". Some people mention that they use the large bag for their 15 inch also. The site's specifications would seem to fit perfect with a medium bag, so i'm not really sure. I would prefer the medium bag, but I don't want to waste my money since you can't return custom bags.
i had a External Harddrive.Currently i can Read//Write on it in Windows PC(Windows7)But when i use the same drive in Mac i can only read...but can't able to write. How to resolve this issue
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
View 2 Replies View Related