I have an iMac G5. I bought a stack of 50 DVD recordable. My DVDs burn fine about half the time, but for the other half I get the dreaded error code 0x80020022. I close all other applications when burning, but this doesn't seem to help or predict any success.
View 7 RepliesI have a Macbook Pro and I am trying to burn a dvd. From a movie I created in iMovie. I exported the movie, in a couple different methods. But I can't get the dvd to burn. "error code 0x80020022". I can burn cds successfully and I am almost 100% positive this mac can burn dvd's. I don't know what to do.
View 1 Replies View RelatedMAC error 0x80020022 and 0x8002006D; trying to burn DVD on G4 powerpc (2002). OS 10.4.11 tiger. The two different errors come up at different tries of burning. amount being burned is about 4.2 Gigs on 4.7 gig disks, same error received after reducing size. Cleaning laser head by first using dvd cleaner disk then tried removing dvd and found it looking vary clean. used Isopropyl small amount on Q-tip. Same error. Tried using Onyk to remove cashes - that screwed me up a bit getting DSL back up. Tried new install of OS 10.4 and then rebuilding back to 10.4.11. I am using the MAC burning software as I dumped iDVD a ways back, I found that iDVD did not load up with the reinstall but I don't think that is relevant for burning. I can burn CD with no problem, and I can read both CD and DVD no problem. My DVD are kept in dark and a drawer away from heat. I do not find a specific Apple.plist in Library that might point to this dvd burning issue. so far on the internet have found no one solving this issue but the problems seem common among many different mac computers and OS.
hardware:
pioneer dvd-rw dvr-104
firm; a227
interconnect; atapi
burn support: yes
cache 2000 kb
reads dvd: yes
i have just started to get the error code 0x80020063 after burning dvd saying disc can not be burned and spits cd out of my mac
put it in the pc the disk is named and content is there put disk in mac it cant be seen anny clue to what is going on and how to fix it
Info:
iphoto 09, Mac OS X (10.6.4)
Hey there! I don't seem to get through this Issue. I was trying to burn content to a Disc and it failed with the error code 0x8002006E, while the process was almost complete. I came across a few forums and nothing helped much to resolve this problem. Is there someone who knows the exact cause? Is this is a known-issue or anything already being addressed by Apple? Or a work-around to get this resolved? because i also read (did not try) that no third-party applications, as an alternative, solved this Issue. Disappointed! Help!  Model: iMac (21.5-inch, Mid 2011) OS: Lion OS X 10.7.4 I have the latest software updates and Firmware updates installed. Â
Info:
iMac, Mac OS X (10.7.4), Latest Firmware Updates patched
Shortly before switching to Tiger, I was having problems burning DVD's. I noticed it first with toast, but found that it also was happening with the onboard burning software for Mac OS X. Every time I tried burning, it would start into the burn and then give me this error: Sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D). I did a hardware test, reinstalled system software, and searched all over Google for any possible solutions. I found tons of people with the same problems, but everyone's solutions seemed to differ, and non seemed to work conclusively.
Some said that the lazer was having calibration problems and suggested using a cleaning DVD. Others said that if I created a new user and switched, then it would work. I tried that, and it just got worse. Others said that the media was not good but I've burned with the exact same media in the recent past, and it worked just fine then. Why would it stop accepting a certain type of media all of the sudden. Besides. My co-workers have the same computers, and they can burn just fine. Do I need a new drive, or is it just a simple software problem? CDs burn fine, but no DVD-Rs.
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).Â
Info:
Mac OS X (10.6.8)
I am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.  Â
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn". I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
The disc can’t be burned because an unexpected error occurred (error code 0x8002006E). I keeep getting this when I try to burn my daughters wedding pic to a dvd. Â
Info:
iMac, Mac OS X (10.7.1)
When I try to empty my Trash with a certain app in it I get error code -8003. I can't find reference to that code anywhere and do not know how to clean up the trash. "The operation can’t be completed because an unexpected error occurred (error code -8003)."
Info:
iMac, Mac OS X (10.6.7), iMac-24, iMac-27, G5, G4, G3, iBook, etc.
I can't do much on my MacBook pro since I have this unexpected error occurred (error code -50), does anyone know what it is and how to fix it? Also when i try to open my iTunes it comes up with unknown error 13014.
View 3 Replies View RelatedI wanted to delete a file in my dekstop, but i can't delete it.. It pops out a message like this "The operation can’t be completed because an unexpected error occurred (error code -8072)."I have used "rm -rf" this kind of sudo, but it doesn't help. I can't even rename it also.
Info:
Mac Pro, Mac OS X (10.7.3)
I'm quite new to Mac, and although everything is pretty clear, I haven't yet figured out how to burn a DVD. Everytime I try, it'll give an error 0x8002006E and stop burning.
- Reading is and has always been fine.
- I'm using Philips DVD-R discs.
- I'm on a white 2Ghz MacBook It's supposed to be able to burn DVD-R, right?
I have tried to do it from the finder, and creating a disc image, and burning it from the disk utility.
On a MacBook Pro 17" I bought about 4 months ago it appears to be rejecting all recordable CDs. It makes no distinction between Recorded Audio, Software or unwritten CDRs.It makes a "funny" clicking noise when inserting recordables. It has no issue with standard factory audio CDs and official movie DVDs. I didn't really try it before now (welcome to the world of networks) so I wouldn't know if this came like that on delivery or if it's new. Either way it worries me.
My first impression was to just send it back to Apple and request that they either fix it, or replace it. Before I do that though (I'd miss the lovely sucker) I was wondering if there's a history of problems with the MacBook Pro in taht area (I know the iMac Superdrives were junk but this isn't really an iMac ) or if there's a Firmware update I should attempt first.Afaik I've installed everything that came up on Software Update (and that includes Firmware updates, right?).
Regards,
Frederik-Jan
I cannot succesfully burn a DVD on my MacBook Pro - just keep getting an error message. What is wrong please?
View 1 Replies View RelatedI backed up all my data onto a couple of DVDs before formatting and upgrading my ststem but now, when trying to copy this data back I am getting the error message. The Finder can't complete the operation because some data in "filenamehere" can't be read or written. (Error code -36). I have looked for ages to try and find a solution for this, but there does not seem to be one when copying from a DVD.
View 2 Replies View Relatedi wanna purchase something and i can't and i don't know why
Info:
MacBook, Mac OS X (10.6.8)
How can I fix an error code 553-'5.3.0?
View 3 Replies View RelatedI have some files on an external disk, and when trying to copy them from the external disk to the mac mini harddrive I am getting the following error message:Â
'The finder can't complete the operation because some data in <file name> can't be read or written (Error code -36)'Â
This is strange as I haven't changed anything and have previously been able to copy files?
Info:
Mac mini, Mac OS X (10.7.3)
I connot burn a DVD. I get the message "The burn to the HL-DT-ST DVDRW GS23N drive failed. The burn failed because of a medium write error." I re-booted, tried different brands of DVDs and slowed the burn speed with no results.
Info:
MacBook Pro, Mac OS X (10.6.8)
I plugged in my external HD last night and was told I'd have to format. I moved all my data over to a larger disk during the night so as to clear it for this. I woke up this morning, did a spotlight search for Time Machine and got "An unexpected error occurred (Error Code -43). I then, in my half asleep state, thought that I'd just uninstall TM. I have this app called AppDelete, which did the trick. Now I realise that TM is in system prefs and appears to be working.
Firstly, has anyone else gotten this error, and secondly, is there any way to get back whatever it was I deleted earlier? Maybe by using the install disk. I looked at it earlier and didn't see any options.
I noticed that the TM "app" in the Applications folder was only a few hundred kbs so I may not have done much damage. Doesn't anyone know what that part is? Is it just a frontend or what?
I am trying to transfer some videos from one external HD to another external HD through my MacBook Pro. I copy the whole folder but only half get transferred, the other comes up with an Error Code 0.
View 17 Replies View RelatedI am trying to transfer all my music over to another hard drive and everytime that I try, I get "error code-61" about 1/4 to 1/2 through it. I tried copying to a different hdd.. same problem. So I researched it, turns out its a permissions problem. When I try to run Disk Utility on the drive with the music it does not allow me to verify or repair the disk. I was thinking about trying to do the transfer in windows.
View 9 Replies View RelatedI have an old PowerMac G4 (AGP Graphics), which has served me dutifully for a long time. However, I recently took all but 128mb of the ram out to temporarily use in other computers, and when I went to put the modules back in, basically none of them worked. Here's the deal: I have 2 256 modules, and when I put those in my computer, whether individually, together, or with other modules, I get this message on-screen and the computer does not boot: localhost:/ root# []. Similarly, I have 3 128mb sticks, but if I put more than one in the computer at a time, I get the same message. I'm thinking the computer may have some issue with more than 128mb of ram, but why all of a sudden? I don't really know anything about code or whatever the computer is trying to tell me.
View 1 Replies View Relatederror code 2STH/1/3:cpu AAD7417AD1
I am using a Power Mac G5 and its crashing down when I'm running the softwares and hardly start as well..took it to a reseller and got a bill and ask me to change the logic board..is there any way to fix this without replacing the logic board.
I am trying to copy movies from an external drive to my NAS and I keep getting error code 51 (Unknown Error Occurred). The drive is formatted in mac os x extended journaled. I do not know what else to do because I can't copy them using my PC obviously, I don't want to reformat the drive because I will lose all my movies. I tried copying off the drive onto another external in FAT32 but that didn't work either and to top it off, I can't fit all the movies onto my macbook.
View 1 Replies View RelatedI cannot transfer files to or from my Western Digital HD (WD1200D036). I have had this problem for a while and I cannot resolve it. What can I do? I cannot even reset my HD as I cannot move the important files from my HD to my Mac.
View 3 Replies View RelatedWhat does this error code mean 4SNS/1/40000000: Tp0P-131.000
View 1 Replies View RelatedTried to empty the trash and get error code -8003.
Info:
iMac, Mac OS X (10.6.8), Intel Core i5
