Software :: DVD Burning Error 0x80020022 And 0x8002006D
Sep 26, 2009
MAC error 0x80020022 and 0x8002006D; trying to burn DVD on G4 powerpc (2002). OS 10.4.11 tiger. The two different errors come up at different tries of burning. amount being burned is about 4.2 Gigs on 4.7 gig disks, same error received after reducing size. Cleaning laser head by first using dvd cleaner disk then tried removing dvd and found it looking vary clean. used Isopropyl small amount on Q-tip. Same error. Tried using Onyk to remove cashes - that screwed me up a bit getting DSL back up. Tried new install of OS 10.4 and then rebuilding back to 10.4.11. I am using the MAC burning software as I dumped iDVD a ways back, I found that iDVD did not load up with the reinstall but I don't think that is relevant for burning. I can burn CD with no problem, and I can read both CD and DVD no problem. My DVD are kept in dark and a drawer away from heat. I do not find a specific Apple.plist in Library that might point to this dvd burning issue. so far on the internet have found no one solving this issue but the problems seem common among many different mac computers and OS.
Shortly before switching to Tiger, I was having problems burning DVD's. I noticed it first with toast, but found that it also was happening with the onboard burning software for Mac OS X. Every time I tried burning, it would start into the burn and then give me this error: Sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D). I did a hardware test, reinstalled system software, and searched all over Google for any possible solutions. I found tons of people with the same problems, but everyone's solutions seemed to differ, and non seemed to work conclusively.
Some said that the lazer was having calibration problems and suggested using a cleaning DVD. Others said that if I created a new user and switched, then it would work. I tried that, and it just got worse. Others said that the media was not good but I've burned with the exact same media in the recent past, and it worked just fine then. Why would it stop accepting a certain type of media all of the sudden. Besides. My co-workers have the same computers, and they can burn just fine. Do I need a new drive, or is it just a simple software problem? CDs burn fine, but no DVD-Rs.
I have an iMac G5. I bought a stack of 50 DVD recordable. My DVDs burn fine about half the time, but for the other half I get the dreaded error code 0x80020022. I close all other applications when burning, but this doesn't seem to help or predict any success.
I have a Macbook Pro and I am trying to burn a dvd. From a movie I created in iMovie. I exported the movie, in a couple different methods. But I can't get the dvd to burn. "error code 0x80020022". I can burn cds successfully and I am almost 100% positive this mac can burn dvd's. I don't know what to do.
I'm quite new to Mac, and although everything is pretty clear, I haven't yet figured out how to burn a DVD. Everytime I try, it'll give an error 0x8002006E and stop burning.
- Reading is and has always been fine. - I'm using Philips DVD-R discs. - I'm on a white 2Ghz MacBook It's supposed to be able to burn DVD-R, right?
I have tried to do it from the finder, and creating a disc image, and burning it from the disk utility.
I connot burn a DVD. I get the message "The burn to the HL-DT-ST DVDRW GS23N drive failed. The burn failed because of a medium write error." I re-booted, tried different brands of DVDs and slowed the burn speed with no results.
I'm trying to burn some data using DVD+R DL using my 17in MBP w/New Toast Titanium.. Unfortunately, its giving me an error and can not burn it. Anyone experienced this issue? Any solution to this problem??
I have the following hardware: MATSHITA DVD-R UJ-846
last week i tried burning a dvd using roxio toast, but before it began to burn it says the following error: the drive reported an error: sense key = medium error sence code = 0x73, 0x03 i tried to use another dvd, but it is saying the same error (i have been using the same brand of dvd before but never encountered such problems), so tried to restart, and it proceeded to burn, no more errors, so i thought it was only a one time thing, so today, i tried burning again, the same thing happen, the same error, i tried 4 dvd's but the same error keeps on happening, but when i restart the macbook pro, it would proceed to burn with no errors. i wonder what seems to be the problem? my dvd drive or the software? anyone encountered the same problem before?
Hey there! I don't seem to get through this Issue. I was trying to burn content to a Disc and it failed with the error code 0x8002006E, while the process was almost complete. I came across a few forums and nothing helped much to resolve this problem. Is there someone who knows the exact cause? Is this is a known-issue or anything already being addressed by Apple? Or a work-around to get this resolved? because i also read (did not try) that no third-party applications, as an alternative, solved this Issue. Disappointed! Help!  Model: iMac (21.5-inch, Mid 2011) OS: Lion OS X 10.7.4 I have the latest software updates and Firmware updates installed. Â
Info: iMac, Mac OS X (10.7.4), Latest Firmware Updates patched
When i start and work with Logic Pro, it freezes after a while and there is no other way, but to force shutdown.I searched for some crash reports but i couldn't find one so i made screenshots of the terminal..I read on the internet some people had the same problem but with other programs, so i'm pretty sure that "Logic Pro caught burning CPU" is the problem. I got this problem since Mavericks 10.9.3, didn't have this with Snow Lion.Â
I keep trying to burn a CD-R, and every time itunes stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome.
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error."What does this mean and how do I fix it?
I have been using Titanium to burn DVD's. It usually takes about the length of the actually DVD to finish the burning process. Is this normal length or is there a faster program for burning DVD
all of a sudden a little while ago (after some apple update, don't remember which tbo) i cannot burn any media, well, 98% of the time.. It starts up and then instnaly goes to finishing burn, and spits it out with a "fail burn because of a medium write error". This happens with 2 brans of media i have, both of which worked flawlessly before, and popcorn, toast as well as trying disc utility. i need to burn dvds for work and so on, but can no longer.
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).Â
I got my LG blu ray burner today, installed it fine and my Mac does recognize it. So I went to FCP and under the File>Share there is the option to burn Blu Ray discs. So I picked my blu ray burner as the drive and about an hour later it asks me to insert the media. So I insert a Blu ray but then it ejects it back out.
I did this about 4 times and then threw in a DVD to see what would happen. To my surprise it looked like it started to do something and the percentage complete went up a little, then it ejects the DVD out and asks for me to put in a dual layered media. I mean the file is no bigger than 2 gigs so my single layer BD-R should be fine. I have heard lots of people talking about Toast 10 to author blu ray's, but the point is why should I spend the money if FCP and compressor should be able to get the job done?
First, let me apologize if this question has been asked a zillion times before. I have searched but failed to find anything that would help me.
I like to build CD's from ITunes. After I burn the CD, I listen to it on my computer...no problem.
However, when I insert the CD in another player to listen...NOTHING!!!!
In the past I have done this and had no problems listening on another device...but all of a sudden I am unable to do. To be honest with you, I don't know anything about MP3 or other code names that everyone talks about.
Is there any free or inexpensive software for Mac that'll take a movie and burn it onto a DVD in the right format?
I read Burn works good, but when I burned the movies to DVD they didn't play in my DVD player.[We use playstation 2 as a DVD player and it usually plays alot of DVD's I've burned]
I have converted two .avi files on my MBP to the .iso file. Then I open up the two files and they become the Audio_TS and Video_TS folders. However, when I try and drag those to Toast, and try to burn the files, Toast always gives me an error. My question, how do correctly convert .avi files to dvd format so I can burn to a blank DVD? I want more than one .avi file converted to dvd format on each DVD.
Does a new user like myself benefit from Roxio Toast? Or does the software that comes with Mac OS X capable of performing some simple CD-R, CD-RW, DVD-R and DVR-RW burning fuctions. I want to organize some old digital images and want to get them off old CD's onto newer (better quality) DVD's and I may temporarily use some DVD-RW's and do my final burn on DVD's.
Another reason im afraid of switching to mac is i dont know what software there is out there for burning dvd's.. its so easy on windows... mac i have no idea... i currently use the following software to burn dvds on windows
DVD Fab 6 to make the copy
DVD Shrink to shrink it so it will fit on a blank dvd
I have done this a million times before, making me wonder if there is a limit to the number of photos that you can have in your library?(Currently, 24,637 photos) System: just upgraded to iLife '09Mac Version 10.5.6 Same camera, same process... But won't import photos as it says there are issues writing to my iPhoto library.
I am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.  Â
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn". I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
