I went to burn a CD today and continue to get the error message:
Sense key=medium error
Sense code= OX73, OX03
I had this problem before but thought it was a bad disk, when I would put another one in it would burn fine.
When I went to burn a new one today, using the same disks that I previously used I would get the above error. I am using Toast Titanium 5.2, Sony discs.
i'm trying to burn a Windows 7 ISO my brother got from some ACM subscription thing. Anyway, every time i try to burn it, it says "Unable to burn "(cd name)". (The burn failed because of a medium write error.)". Why is this happening? Is it the superdrive or the DVD-Rs? My computer is the Macbook pro with 2.4GHz intel core 2 duo cpu and with 2GB of 676MHz DDR2 SDRAM. The DVD-Rs i'm trying to use are Sony branded.
View 6 Replies View RelatedI have one of the older macbooks [the ones that were given out during summer '07, that came with the free ipod nano], and it used to burn cds fine but today I tried inserting a cd and it burned three songs and then said burn medium error. now when i put in a cd there is some scratching and whizzing and other random noises, and after a few minutes it spits it out without asking what I want to do with it.
View 1 Replies View RelatedEverytime I try to burn a disc, I keep getting the message "The attempt to burn a CD failed.The burn failed because of a medium write error".
Info:
MacBook, Mac OS X (10.5.8)
I am trying to burn a 4.2 GB project in iDVD. My project is saved onto an external hard drive, and when I start it burning, I get an error message that says "Not enough free disk space for encoding the remaining assets." It says I only have 825 MB available on my hard drive and 3.362 are needed for encoding, but I actually have 786 GB free! Any idea what could be causing this?
View 4 Replies View RelatedWhat does a medium write error mean, when trying to burn a cd?
Info:
MacBook Pro, Mac OS X (10.6.8)
I connot burn a DVD. I get the message "The burn to the HL-DT-ST DVDRW GS23N drive failed. The burn failed because of a medium write error." I re-booted, tried different brands of DVDs and slowed the burn speed with no results.
Info:
MacBook Pro, Mac OS X (10.6.8)
I am running a MacBook Pro 2.2 GHz with a MATSHITA DVD-R UJ-857E drive. Recently I have been trying to burn some video_ts files ripped with MacTheRipper on to 8x Memorex DL DVD +R. I think the problem here is that my drive is only built to handle 4x speeds. I have tried decreasing the speeds in Toast this however has no effect and I still receive a drive error. I have also tried to transform the video_ts folder into multiple different types of disc images and burn them to the DL DVD from the disk utility function. The error I get from here is also a drive error
View 1 Replies View RelatedI have been trying to backup a few .avi files I have onto DVDs and after reading over the forums I have aquired ffmpegx and Toast 8. I place the avi file into ffmpex, encode it with the dvdffmpeg format. But once i burn it with toast, it takes the original wide screen avi file and stretches it to full screen.
I tried re-encoding with the DVD 16:9 setting selected with ffmpeg and it seems to look better in a preview, but when I try and burn the Video_TS folder in Toast it gives me the CSS Encryption disk error, which I do not understand because I'm not copying a copyrighted dvd.
Unable to burn disk a internal error occurred?
Info:
iMac, Mac OS X (10.6.8)
I keep trying to burn a CD-R, and every time itunes stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome.
View 24 Replies View RelatedIm using a 17" unibody macbookpro 2.66 early 09 to make a copy of my Leopard Disc to put in an offsite storage location.
Im able to rip movies and burn movies (DVD-R, DVD-RW, DVD-DL), iMovie videos, iTunes cds, rip audio discs, etc.
The media is Dual-Layer DVD-R in disk utility
I burn it at the slowest possible speed (on both systems) at 2.4x
After it writes the data to the disc and finishes, i get this lovely image:
I tried doing a test install of it from the burned dvd and it installed fine.... = what the huh!?
its done this twice.
using the same media on a 15" 2.2ghz uMBP late 2008 gives me a completed successfully notification every-time.
burn info:
17" Superdrive info:
HL-DT-ST DVDRW GS21N:
Model: HL-DT-ST DVDRW GS21N
Revision: SA17
Serial Number: KZZ91OM5217
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
15" Superdrive info:
MATSHITADVD-R UJ-868:
Model: MATSHITADVD-R UJ-868
Revision: KA14
Serial Number: dE0E4283
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
Log Files from the 17" uMBP
Here are the Disk Utility Logs
Quote:
2009-08-23 15:19:30 -0700:
2009-08-23 15:50:48 -0700: Eject of �disk2s3� succeeded
2009-08-23 15:50:51 -0700: Burning Image �Mac OS X Install DVD.dmg�
2009-08-23 15:51:02 -0700: Image name: �Mac OS X Install DVD.dmg�
2009-08-23 15:51:02 -0700: Burn disc in: �HL-DT-ST DVDRW GS21N�
2009-08-23 15:51:02 -0700: Erase disc before burning: No
2009-08-23 15:51:02 -0700: Leave disc appendable: No
2009-08-23 15:51:02 -0700: Verify burned data after burning: Yes
2009-08-23 15:51:02 -0700: Eject disc after burning
2009-08-23 15:51:02 -0700:
2009-08-23 15:51:02 -0700: expected CRC32 $0F91EA17
2009-08-23 15:51:02 -0700: Preparing data for burn
2009-08-23 15:52:25 -0700: Opening session
2009-08-23 15:52:31 -0700: Opening track
2009-08-23 15:52:31 -0700: Writing track
2009-08-23 16:11:26 -0700: Finishing burn
2009-08-23 16:12:26 -0700: Closing session
2009-08-23 16:12:28 -0700: Finishing burn
2009-08-23 16:14:05 -0700: Burn failed
2009-08-23 16:14:05 -0700: The device failed to respond properly, unable to recover or retry.
2009-08-23 16:14:16 -0700: Unable to burn �Mac OS X Install DVD.dmg�. (The device failed to respond properly, unable to recover or retry.)
2009-08-23 16:21:59 -0700: Attach Image �Mac OS X Install DVD.dmg�
2009-08-23 16:21:59 -0700: Initializing�
2009-08-23 16:22:00 -0700: Verifying�
2009-08-23 16:22:00 -0700: Verification completed�
2009-08-23 16:22:00 -0700: expected CRC32 $0F91EA17
2009-08-23 16:22:00 -0700: Attaching�
2009-08-23 16:22:00 -0700: Checking volumes�
2009-08-23 16:22:01 -0700: Operation canceled by user.
2009-08-23 16:22:02 -0700: Volume check completed�
2009-08-23 16:22:02 -0700: Mounting�
2009-08-23 16:22:02 -0700: Finishing�
2009-08-23 16:22:03 -0700: Finishing�
2009-08-23 16:22:03 -0700: Image �Mac OS X Install DVD.dmg� attached successfully.
**********
Here is from ~/Library/Logs/DiscRecording.log
Quote:
Disk Utility: Burn started, Sun Aug 23 14:57:02 2009
Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI.
Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Sun Aug 23 15:19:01 2009
Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Disk Utility: Burn started, Sun Aug 23 15:51:02 2009
Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI.
Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Sun Aug 23 16:13:34 2009
Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
all of a sudden a little while ago (after some apple update, don't remember which tbo) i cannot burn any media, well, 98% of the time.. It starts up and then instnaly goes to finishing burn, and spits it out with a "fail burn because of a medium write error". This happens with 2 brans of media i have, both of which worked flawlessly before, and popcorn, toast as well as trying disc utility. i need to burn dvds for work and so on, but can no longer.
View 24 Replies View RelatedIt is supposed to be the best burning package on mac. But I doubt it. I convert videos to dvd-video format using the absolutely brilliant windows7 application convertxtodvd. Please dont tell me to use a mac application instead of it. I tried it many times, there were always several problems(slow speed, subs etc). This is not the case here.
So, I want these dvd-videos in Video_ts format, to be burned in dvd disks using toast. It is supposed that video_ts folder are a standard folder, no matter the system you use. But toast has a different opinion. When I drag the folder in the dvd-video window, it asks to re-encode the video!!!If I try to burn this video_ts folder in windows machine using 'nero', no problem at all, straight burning! I really cannot understand why this happens.
Another problem I have is that the files I want toast to burn, usually reside to network computer. Is there any way to burn files from a network computer(win) using toast? Can toast access network or not? If not, I have to manually copy files to local disk, several minutes spent for copying gigabytes just to be able to burn them.
My new DVD burner will play CDs and DVDs and burn CDs, but will not burn DVDs through the finder. Will getting TOAST definitely enable me to burn DVDs? I don't really need it otherwise and I would rather not buy it unless it will definitely enable me to burn DVDs.
This is my burner:
LG GH22LP20
G5 PowerMac
10.5.5
I used Handbrake to rip encode the dvd to mp4. Now I want to burn it to a DVD for a cheap backup.
mp4 is 1.4gb
I keep getting an error saying the data I'm trying to burn is over 4 gb's and too big for my blank disc. How's that possible?
Shouldn't I be able to burn the mp4 to a dvd easily in iDVD?
I am desperately trying to burn a ISO file to a USB and external HD but Disk Utility does not want to. Instead I get the error message "Could not validate source - error 254". So there must be a problem with the source which is the ISO file.
I already tried setting the Partition Map Scheme to both Master Boot Record and GUID Partition Table. I also formatted the drive to FAT and HFS+. I cannot find the cause of this error. It clearly looks like Disk Utility does not like burning ISOs to USBs or HDs.
However, I really really need to this since I cannot burn ISOs with my SuperDrive which is also a common problem [URL]with my MacBook Pro.
When trying to burn a DVD on my external Sony burner (model DRX-840U) I get error code:0x80020025, "this disc could not be used because the disc drive is not supported." I'm using an iMac with 10.5.7.
The drive worked fine last week. Now it consistently brings up the error code when inserting a DVD.
I've tried:
*Relaunching finder
*Attempted burning under a different login on the computer
*Restarting the computer
*I've searched every forum I can think of and nothing has worked.
I've been getting this error message when I burn CDs: Error Code 0x80020063
View 1 Replies View RelatedDoes anyone know the meaning of an error code -43? I receive this when trying to burn a data DVD from the Finder; the error text is to the effect of "<cannot find resource fork> for <path not accessible>". Doesn't seem to matter what I'm trying to burn. Burning disc images using Disk Utility or from iDVD works fine. My hard disk, from where the files are being copied, verified with no errors.
View 1 Replies View RelatedI'm getting the error code 0x8002006E when trying to burn DVDs. I am able to burn CDs and the drive reads data and audio CDs and data and video DVDs.
I've tried the two fixes suggested on Apple forums without success. The first was to trash the com.apple.finder.plist and the second involved removing the battery, hold the power button down, and pressing alt, command, R, P and the power button down until I heard the two chimes. Neither worked.
I've used Verbatim DVD+R and TDK DVD-R disks without success. I've used the Verbatim disks for months with no problems.
Error 0x80020025 have an aluminium macbook, os x leopard, and suddenly cannot burn dvds, this is the first time that i have had this problem, have burned m,many dvds before.
View 1 Replies View RelatedI keep getting this error code and can't burn anything without getting it. Don't know what to do?
Info:
iMac, Mac OS X (10.7.3)
My Macbook keeps saying 'The burn to the MATSHITA DVD-R UJ-898 drive failed. The burn failed because of a medium write error.' everytime I try to burn a cd with data on it, it has only just started doing it after 2 years of use, how do I fix it?
Info:
MacBook
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error."What does this mean and how do I fix it?
Info:
iMac, Mac OS X (10.6.7), With Snow Leopard
I used Totast Titanum 10 to burn the DVD's. The settings I used was to burn Data Disks with "Mac Only" or "Mac & PC". Before I eject the dvd-r after burning, I test the files burned in the dvd if they can be opened by the appropriate application directly from the burned dvd.
For example, I checked if .mv4 files can be played by either Quicktime, iTunes, MPlayer OSX Extended, or VLC; checked if disk images can be mounted and files on mounted disk can be opened; and checked if unencrypted movies that I personally own (using MacTheRipper 3.0) with Video_TS and Audio_TS folders that were compressed by DVD2OneX 2.3.1 can be played on Apple DVD Player.
I'm currently trying to burn a file onto disk. I'm running into is that I cannot play the file from the disk.
View 5 Replies View RelatedThe disc can�t be burned because because communication between the computer and the disc drive failed (error code 0x80020022).
This is the answer I get most of the time with new DVD. Any possible solution is the system faulty ?
It all started last week when I tried burning an ISO to a blank Memorex DVD-R. When I inserted the DVD it would eject the CD over and over again no matter how many times I tried. The same thing would happen if I used a Memorex CD-R. Now these CD's worked in the past without any issues, and seem to work just fine on my other computers.
I decided to go out and buy a different brand of DVD-R's at Office Depot, thinking the laptop just wasn't really into these DVD's anymore. I ended up buying TDK DVD-R's. The computer seemed to like these more because it didn't eject them when I placed them into the drive.
I recently purchased a Macbook 2.13 GHz Intel Core 2 Duo. I've tried to burn audio cd's from mp3 in Itunes to use in my car but when I try them in the car cd player they don't work. But they work on my mac. I used to be able to do this on my old mac mini with no problems. I'm running the latest version of OS X.
View 6 Replies View Related