I have a 2007 MacBook Pro. I was wondering if it were possible to turn it into a server using Apache. Also, if I used Apache to turn my computer into a server, would it be compatible with SMF or vBulletin and able to host one of these software?
View 3 RepliesWith any Unix machine, one can run at the command line:- apachectl -S This will show all virtual servers configured in Apache, and will break if there are any obvious problems in the httpd .conf files. It's very handy for testing a new configuration before restarting the server. With Mac OS X Server though, this doesn't work properly. Sure, I can run that command and see a virtual server or two, but with the introduction of the server Apache wrappers, the command line tools read a very different configuration than the `serveradmin` tool does.
e.g. Wrappers like:-<IfDefine MACOSXSERVER>
....
</IfDefine>
or <IfDefine WEBSERVICE_ON>
[code]....
ps. Running `sudo serveradmin stop web && sudo serveradmin start web` really compared to `apachectl graceful`; it's painfully slow and doesn't provide a way to test a custom configuration before attempting to restart.
Info:
Mac Pro mid-2010, Mac OS X (10.6.4)
how to set apache to listen to onlt certain ip's? I tried changing the httpd.conf file using the listen command, but it still listens to all ips. If I adjust the default website to listen to lets say 192.168.2.2:80 it does, but then seems like it breaks server admin, where changes do not save.Â
Info:
Lion Server 10.7.3, Mac OS X (10.7.3)
I have a Mac mini running Leopard server (10 user) and I am getting an error in the system log: "May 3 14:52:25 mini01 org.apache.httpd[941]: SSLCertificateFile: file '/etc/certificates/Default.crt' does not exist or is empty". I do not have web services running, nor is Apache 1.2 running. I was trying to update to Apache 2.2 but it constantly failed so I just shut web services down (using this system for training NOT critical). How do I stop what appears to be Apache 2.2 from launching/looking for a non-existant SSL certificate?
Info:
Mac mini, Mac OS X (10.5.8)
how can I edit "root" pages, such as [URL] instead of ones under my user directory [URL] on MacOSX 10.5.8?
View 1 Replies View RelatedCurrently I'm using Apache version 2.2.14 and wanted to upgrade to 2.2.16 but after upgrade I found that it still running in old version.
View 1 Replies View RelatedI am running mac os x 10.5.8. I want to run the apache server, but i get the following error: (2)No such file or directory: httpd: could not open error log file /private/var/log/apache2/error_log. Unable to open logs. It is the first time I try using Web Sharing on my machine, but somehow it seems some files are missing. Is it possible to install the apache server anew?
View 4 Replies View RelatedWhat does apache 2.2.22 (ubuntu) server port 80 forbidden user mean?
View 4 Replies View RelatedI have had a mac book for about a year now. My husband and I are expecting a little girl in about 2 weeks and are looking to purchase our first camcorder. I know that with a mac and wanting to use imovie and idvd you cant just go out and get any ole camera I am not really computer savvy and we are really just looking for something to capture the birth and special moments nothing professional. Don't get me wrong I want the best quality that I can get... just cant pay an arm and a leg.
View 7 Replies View RelatedJust wondering if anyone has some tips for turning a G5 into a network file server to be shared amongst 5 video editing stations.
View 1 Replies View RelatedNot able to find the lion software update service in server app
View 1 Replies View RelatedIs it just a server? and how much do they go in retail shops / stores??
I would like to find out as i have a mac mini, g5 quad and a macbook.. just a fan of apple mac lol. I do alot of webdesigning for many clients, could the xserve be a way to i don't know host these clients or something if it is a webserver?
We're wanting to get a HP Photosmart C3180 All-in-One inkjet printer shared on a network. I bought a Netgear PS121 USB 2.0 printer server which worked with the HP printer and I was able to print to the printer through the printer server over the network from a Windows machine. I tried printing to the same print server from a Mac-mini running OS X Tiger with no success. It appears the HP Photosmart print driver I installed on Tiger didn't install a PPD in CUPS to allow for network printing. When I connect the Photosmart printer directly to the Mac-mini, I can print just fine. When it's connected to the print server, the print server rejects the print job.
When I define the print server to the Mac-mini, Tiger wants to use the Generic Postscript driver. I define the print server using the IPP printer definition area.
I tried installing Bonjour for Windows XP on the Windows machine and using that to print to the HP Photosmart printer when it was physically connected to the Mac-mini and I WAS able to print a test page once but I made the stupid mistake of changing the printer driver on Windows that was setup by Bonjour and I haven't been able to print to the Bonjour shared printer since.
Im looking for a controller card for the mac in my signature there are a load of them on ebay/maplin etc - but none of them say mac compatible, will this be a problem or can i use them anyway?
Bit of advice as i have 2 120 gb hdds to put in the mac (+ The 60gb stock)
OSX 10.6 won't play nice with my old CF card readers. From reading online discussions, it appears I need to buy new 10.6 compatible card readers. Anyone know which CF readers currently on the market will work with Snow Leopard?
View 5 Replies View RelatedI upgraded the memory in my macbook and was wondering if the old memory could be used in my dad's Dell Inspiron 6000 laptop? Below are the tech specs for both laptops
Dell Inspiron 6000 Laptop
RAM
Installed Size 512.0 MB / 2.0 GB (max)
Technology DDR2 SDRAM - 400.0 MHz
Memory specification compliance PC2-3200
RAM form factor SO DIMM 200-pin
RAM configuration features 2 x 256 MB
Macbook early 2008
1GB (two 512MB SO-DIMMs) or 2GB (two 1GB SO-DIMMs) of 667MHz DDR2 SDRAM; two SO-DIMM slots support up to 4GB
Will the old memory from the macbook work in the dell?
I've got an old school mac pro 1.1 (because i'm too poor to afford a newer one) which didn't come with an airport card when I go it. Have just grabbed one out of a Macbook to put in the mac pro. It works, but not as a normal airport card should.
I'm not sure if its an incompatible card, or if i'm just dealing with a software issues. The normal airport menu up by the clock is useless. It just says Airport: No configured, and then has a link to network preferences in system preferences. I can connect to a network, and once its connected it works how it should, but to connect I need to go into network in system pref, then under network name, select Join other network, then show network, then i'll see the list of networks and be able to select the right one. But if I restart, or the computer goes to sleep, it forgets all that information, and I have to go back to the start again and select the network again.
Do you think its an incompatible card, or is there some software trick I can do to get it working properly?
This weekend I starting getting the clicking sound of death from my boot drive. Today I ran out and got a Western Digital Caviar Black 2TB HDD that is SATA/300 drive. Are the higher read/write speeds supported by the MP 3,1 controller?
As I write this, I've got CCC cloning the entire drive and praying that it doesn't fail mid-copy.
I want change my new iMac Serial-ATA HD with SSD. is this possible?
View 11 Replies View RelatedI have an old 12" G4 1.5 PowerBook that I want to upgrade the memory. On the Crucial website, I see a 2GB DDR333 module. Is it compatible?
View 2 Replies View RelatedI'm at a loss at the moment trying to find a 4-bay SATA enclosure that is compatible with the Highpoint RocketRAID 4322.
Could I get some recommendations?
Here's the RAID card:[URL]
I've got an iMac 17" Intel Core duo. I would like to know for those who got the same model, if the matshita internal optical drive ( MATSHITA DVD-R UJ-85J ) is compatible Lightscribe ?
View 2 Replies View RelatedIm at a loss. Does one exist? .mkv to anything playable will be fine.
or an mkv player will work i suppose
Which Mac program will do this?
View 7 Replies View RelatedI had a MacBook Air late 2008 and it was destroyed by a mean person, now I have a late model MacBook 2009 and updated everything, but I cannot figure out how to load Apache Open Office. It keeps giving me a warning that the security system won't allow anything that is not made by Apple or has its approval or something, but it worked on the 2008 Mac and it worked awesomely! Why can I NOT find anything about it now that I have Yosemite , which is also hard to remember to spell!
Info:
MacBook Air, OS Yosemite 10.10.1
i have a new mid-2010 i5 iMac with a radeon 5750 processor, and would like to run linux on it, however, ubuntu 10.10 isn't working, i get through the whole install, and restart, and it won't boot. i've installed rEFIt, and it shows up as installed on the drive, but won't boot to anything but black with a flashing white line on the top left. known compatible working version?
View 1 Replies View RelatedThe old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies View RelatedIs there any application to read a forum in the desktop? I mean, outside a browser.
I think that a desktop app could offer some advantages that online read doesn't offer.
For example, you could skip ads or you could save useful threads regarding the forum type.
This kind of app would very useful if it syncs with a iphone one
I'm new to macs and I am pulling a prank on a friend. I am trying to run a javascript function everything he submits a forum. I have written my javascript already but I have no idea where to start.
View 4 Replies View RelatedIs there some security phenomenon that will not allow me to copy and paste my PW into the slot/space for Password, when I try and signin to Apple forums. The allocated space where I would normally paste my PW does not show anything being pasted,, and I have also used Paste in the menu area , and even tried dragging my PW into this area, to no avail. Of course, I can type it in manually,, however, my PW is strong,, and generated, and find it very arduous to type in.Perhaps a 10.7 feature?
Info:
iMac, Mac OS X (10.7), Mid 2011
