I have a problem using my Lexmarkt T620 printer with OS Lion.It prints everything as I want. But it adds at every printed job an additional page with only a few words on it and including information about the printed file. Something like ERID.I've never seen anything like this and I don't want to waste more paper when printing with my Lexmark.
Info:
MacBook Pro, Mac OS X (10.7.3)
Since upgrading to Lion I have an extra page printing with every print job on my Optra E310 laser printer with cropped off USERID = "xxx", HOST ID = "xxx" and @PJL JOB NAME = "xxx". It seems to happen mainly in Apple applications, i.e. Mail, but has also happened in Acrobat Pro X. Admittedly, it's an old printer but according to Apple and Lexmark it is supported in Lion. I've tried every setting available but can't seem to eradicate the problem. Lexmark support, who were extremely unhelpful, kicked it straight back to Apple.
Info:
Mac Pro, Mac OS X (10.7.3)
Whenever I print a mailing envelope in Lion's Address Book, it prints fine but then prints a blank page following. How can I stop this?
Info:
iMac, Mac OS X (10.7.3), Address Book
Mac Pro with 10.7.3 and Minolta 1250e PagePro printer, which is listed under the Driver tab as a Generic Postscript Printer. Apple did not have anything for this model listed under the popup menu selection "Select Printer Software". The driver for printer was written for classic so I can't install it from the CD.
Everything prints, but an extra page is also printed with the following message:
ERROR: timeout
OFENDING COMMAND: timeout
STACK:
-filestream-
Printer is connected to a usb port which connected directly into the back of the Mac.
Info:
Mac Pro, Mac OS X (10.7.3)
In Safari, I am no longer able to print web .pdf documents. The print screen pops up, however the preview document shows a blank page. I am able to print in Firefox, so this has to be a Safari problem. I have checked my Internet Plug In files and there is no Adobe plug in as suggested by others in similar questions. Turning on/off the computer has not helped either. Nor has Open PDF in Preview. I'm using an iMac with Lion and an HP Photosmart C4700 printer.
Info:
iMac, Mac OS X (10.7.3)
For years I had no trouble printing envelopes straight from Address book. But since I upgraded to Lion, when I print an envelope, it prints (1) the envelope just fine, but then also (2) a blank 8.5"x11" page. How do I get it to stop printing the extra page?
View 3 Replies View Relatedmy friend has a c510 and uses it to print dvd covers it works well ive been trying to do the same with the c522 but it doesnt print to the edge stuff gets cut off is there any setting i can change to make it print the full area
View 1 Replies View RelatedAll of a sudden out of nowhere, one, and only one PDF, will only print on 1/4 of a page. Everything else prints fine, other PDFs print to full pages, anything outside of Safari prints as it should--it's just this one PDF in Safari, it's driving me crazy. I've logged out, logged back in, restarted my MBP, even reset safari--and nothing at all. All printer settings/scaling are as they should be, and the preview shows a full page document, but what comes out of the printer is 1/4 page. Here's the PDF: It prints fine in FF, but for some reason it's coming out super light/blurry/grayscale/crappy, so it's no good.
View 10 Replies View RelatedI created an excel document but I don't want the first line of information for the next bank of data showing when I print it. I basically want to be able to choose what prints on what page and how much of something prints on what page, by dragging the print line or whatever it is you do.
View 1 Replies View RelatedI have iPhoto '08 or '09. On my PC I had Elements and using that I could print 4 pictures on one 8 1/2 X 11 sheet. I would start by choosing the pixs, editing them and sizing them to fit 1/4 of the sheet. Then I would create a blank white sheet, drag the 4 pixs over and position them on the blank sheet. I would then print that sheet. Can I do that using iPhoto?
View 2 Replies View RelatedWe recently updated our iBook running 10.3.9 to a MacBook running 10.5.5.
The problem we have is with Microsoft Word 2004. In a multi-page document, Word only prints the last page, unless we specifically print out each individual page.
I found a thread that identified a problem printing to HP all-in-one printers. I followed the instructions in the thread and removed everything about HP printers from our Mac. I then re-installed the HP drivers from the MacOS 10.5 install disk.
I am trying to print a duplex copy on a HP CLJ 5550dn with Adobe InDesign CS4, I have recently upgraded from CS2 and had no problems with that in the past.
The problem I am having is that the duplex print only prints 3 quarters of the whole page either site. This is also happening on the one sided printouts too
When I try to print any document from a web page, i get an empty page, only the header line at the top of the page. Y work with Safari (last version) but the same I have with Chrome. From other sources there is no problem. I have two HP printers, one laser BW and a color HP Deskjet D1663.
My computer is a MacBook Pro 7.1 with Lion 10.7.4
Info:
MacBook Pro, Mac OS X (10.7.3), 8 Gb RAM
When I save a Word 2004 file as a PDF, only the first page is saved/printed.
This is a 2 page document. adjusting the settings?
Info:
iMac, Mac OS X (10.5.8)
So my friend has iWork 09 as well as I and im trying to help her and I cant figure this out. She has a presentation with 9 slides or so and she would like to print 6 slides per page.
Keynote does it, except it makes them all super small. Powerpoint handles this with no problem. So im totally stomped on this. It seems like the old Keynote did this no problem.
I can't figure out how to print multiple slides on a page. On Windows I would just select print preview and then select handouts... done. Now I have no idea how to do such a simple task. I figured it out, but I have another question. Say I wanted to print 4 slides to a page. How do I make these slides larger?
View 1 Replies View RelatedAfter adjusting the paper size or fit to page in word or excel, the printing document often became blank even if it shows normally in preview.
View 1 Replies View RelatedI run Microsoft Office on my MacBook Pro. I routinely "print" Word documents to .pdf files. My conversions to .pdf are now resulting in two .pdf documents rather than one multipage document. For example, a two page Word document about puppies would be converted Puppies and Puppies.2 rather than just one 2-page .pdf file. A 14-page file just also saved as two separate .pdf files; the first was only one page, and the second contained the other 13 pages. This is a new problem as of tonight; I've never previously had any difficulty. It's quite frustrating, and I can't seem to determine the cause.
Info:
MacBook Pro, Mac OS X (10.6.8)
The printing area is smaller than the page I want to print, 3 or 4 columns are on an other page to the right of the print area that I can print, I am not great on excel but would like to move the printing area so it can take all of it.
Info:
iMac, OS X Mavericks (10.9.1)
Can I use a Lexmark T420 with OSX10.7.x?I can't connect anymore. All software up to date both Lexmark and Apple...
Info:
MacBook Pro, Mac OS X (10.6.8)
i can connect my lexmark printer s400 series by usb but not wirelessly
Info:iMac, Mac OS X (10.7.3)
Last time I upgraded the system I had the same problem. My Lexmark C925 goes missing on the network. I seem to remember last time, all of a sudden it just started working so didn't think anymore of it!!
I've deleted the Printer in Preferences. When trying to reinstall the progress bar just whirls around forever. When I stop it the Lexmark isn't seen at all!
One time it said my Printer software was damaged and did I want it repaired. I said yes, but made no difference. Tried installing the latest Lexmark drivers myself (from Apple and Lexmark) to no avail. I've tried rebooting (Mac and printer). Is there an issue with Lexmarks drivers???
Info:
iMac, Mac OS X (10.7.4)
I have connected my Macbook pro to the printer and all looks connected, except when I print error message reads not connected?
View 2 Replies View RelatedI have successfully installed and set-up the wirless utility and the drivers. When I try and add the printer it does not appear in the add printer list.
Info:
MacBook Air, Mac OS X (10.7.4)
Is there a way to delete empty desktops in Mission Control? There is a + to add them, what about removing ones you do not need?
View 6 Replies View RelatedI saw an iMac in sleep mode and the digital clock was huge.
View 2 Replies View RelatedI have a MacBook Pro with Leopard/MacBook Pro, Mac OS X (10.5.8).I am trying uninstall the Lexmark X75 and it is not going away. The printer is still listed under 'Printer.'I have tried contacting Lexmark and their directions were useless. Per their directions, I clicked on the Uninstall in the Lexmark All in One folder, but after the unintallation was 'complete,' a window popped up stating that not all files were removed and they had to be removed manually.how to get rid of Lexmark X75 completely?
Info:
MacBook Pro, Mac OS X (10.5.8)
I am trying to connect my wireless printer (Lexmark 7600) to my new macbook Air. The macbook finds my network but cannot find the printer. I have a Sony viao using the printer on the same network. I have followed all the Mac instructions but no luck.
Info:
MacBook Air, iOS 5.1
No updated driver from apple. The all in one wireless lexmark (X6570) printer is a few years old. I had a working driver with snow leopard which carried over to lion,but I deleted it trying to go wireless (mistake).
Info:
MacBook Pro, Mac OS X (10.7.3)
Teaching in Netherlands. When connected to wireless, signal bars are full but Macbook does not display any page just a blank page. Itunes and App store both work fine.
My windows notebook and Android phone both connect to wireless.No proxy options are ticked.Ran the Assistant Diagnostics: Selected Wireless, Network settings, ISP, Internet, Server went green/red then back to green with messafe saying Network Change detectedRestarted routerRemoved wifi network and reconnectedRan wireless diagnostics, nothing shows up Renewed DHCP LeaseChecked the Ipv4 and Router address - both begin 192.168.178.xThere are two DNS Server numbers - checked both and they are related to the ISP
Dont have ethernet cable to check wired connection
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
