How can I keep the MacBook Pro awake with the lid closed (when I attach two Thunderbolt displays to it)?
Info:
MacBook Pro (Retina, Mid 2012)
My mid 2007 macbook pro thinks its asleep when the cover is open but awake when the cover is closed. I was encoding some media files to dvd when a friend accidentally unplugged the power source. The battery drained and I did not notice until it was fully drained. I then went to plug it in and turn it back on and it refused to, I then closed the cover and it awoke as if everything was normal. I opened the cover and I saw it exactly as it should but then the screen went black as if it had gone to sleep. i'd rather not have to purchase a new macbook.
View 1 Replies View RelatedWhen my screen is closed the computer continues to run, and does not respond when the monitor is reawakened. Furthermore, upon shutdown, I have to remove the battery and reset power management in order to get the computer to turn on. If I just shut it down, the computer refuses to come on, hearing the hard drive make its sound before just going out to lunch.
Disk Utility says the hard drive is okay because it would not get past the black screen.
ive been tryign to get my mac to continue playing music while the lid is closed and am not having much luck. I have pretty much discovered that it is impossible to do from the OS its self. I have also downloaded insomniax but everytime i enable it my system crashes and i gotta restart. So is anyone aware of a solid program i can use that will do waht im trying to?
View 5 Replies View RelatedI typed Mac Help about "to operate the portable computer with an external monitor attached and the display closed. When I close the display of my Mac Book or MacBookPro, the external monitor such as my 50" Plasma monitor or video projector would go black. I read the Help and it said and required the USB Mouse and Keyboard to close the Macbook display and put computer sleep. My question is will the Apple blue tooth or wireless keyboard and mice will work with out using the USB? Has any one try that? I am not sure if I should buy wired or wireless to operate this.
View 10 Replies View RelatedI recently purchased Thunderbold (TB) display and 17" Macbook Pro. My TB flickers quite often and disconnects. Then I have to power off TB and reconnect. All updates are current. Dont know what the issue will be. Is there any utility to check the condition of TB. I did not connect any peripherals to TB except the Macbnook Pro.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I would like to know if there is a way to daisy chain 3 (three) thunderbolt displays to a 15" MacBook Pro, maybe if the laptop is in clamp-shell mode?
Info:
MacBook Pro, Mac OS X (10.7.3)
Tonight I upgraded my dad's macbook to Leopard, successfully. During the first login process, the software update asked me to install some updates, and that a reboot was required immediately (I imagine they were firmware related). I left the room to let the macbook do its thing and when I came back in my dad had shut the computer (not knowing I had done the firmware update thing). Long story short, I get an immediate kernel panic right away when I turn the computer on. I did not back up the data because I was only doing a system upgrade (which worked just fine!). When I boot, I do see the Apple Logo. I am able to boot into the Leopard Installation DVD. At this point, what are my options? I am only familiar with Linux and Windows advanced installations, so I don't know what is available to me.
1) Can I do a 'repair' on the firmware (or whatever is damaged?) from the DVD?
2) Am I able to do a fresh re-install of Leopard, without re-formatting the drive?
3) Does the 'Disk Utility' give me any options?
I've noticed this twice now, when I shut down my machine I always make sure its fully powered down, I then close the lid, now normally I let the macbook charge overnight, but the system on both occasions was fully charged, so I switched off the mains supply went to sleep and in the morning switched the plug on and picked up the mbp to check my emails, now the lid was down when I picked the system up but all of the sudden the apple logo lit up and the chime sound started and the system started up, the only issue is that when you open the lid you can see the logon screen but it's to dark to see anything but I can see outlines that indicate the system is at the logon screen. I'm a tad concerned that there might be a short on the casing to the power button, but it's odd that it only does it when I suddenly power up via the mains and not when on battery power? It's an Early 2011 MBP 13" intel i5 2.3Ghz 8GB corsair RAM 120GB corsair SSD.
Info:
MacBook Pro, Mac OS X (10.7.3)
My family owns two MacBooks and an iMac. All of these computers share the same internet (a wireless Bell EWire modem (which probably doesn't tell you much...)). My MacBook and my father's iMac connect easily and have connected to the internet for as long as we have had these computers (a few years). The other MacBook has connected up until a few weeks ago (it is a year younger than my MacBook). A few weeks ago, when the MacBook was closed (put to sleep but not shut down) and reopened, the airport symbol would display a working airport and connection but when I clicked Safari, it would not connect.
View 1 Replies View RelatedI have a MBP 2.66 GHz Intel Core i7 and have tryed to connect a Lacie Thunderbolt eSATA Hub to the Thunderbolt port.
1 Will it work with the Thunderbolt Display port?
2/ Why won't it see and Thunderbolt devices in the Systems Report?
Info:
MacBook Pro, Mac OS X (10.7.3)
So I have a lot of USB devices plugged into a powered hub and I have a Dell 2408WFP monitor with USB ports.
Often when I awake from sleep the devices plugged into the powered USB hub that's plugged into the 2408WFP which in turn is plugged into my computer are not present until a reboot of the computer.
While mirroring my screen I cannot close the lid and keep it awake. It will wake if I use the keyboard but immediately goes back to sleep, this happens repeatedly. I can leave it open with no problems.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.6), MacBook Pro 2.4 GHz/2 GB SDRAM/.mac & POP
I downloaded the latest software update for Leopard. I've noticed that when I wake my MBP from sleep, the brightness of the screen is very low. I have to click on "F2" to increase the brightness of my screen.
View 1 Replies View RelatedI have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
My iTunes sidebar shows that I have two devices are attached when in reality no devices are attached. I delete them and every time I open iTunes, they show up again in my sidebar.
Info:
iMac, Mac OS X (10.7.3)
Running OSX 10.5.8 (plain vanilla installation) when I select "Sleep" it will not awake from sleep. This is on my G5 tower.
Running OSX 10.5.8 (full custom with lots of software)... my system will not remain in Sleep mode for more than 1-2 seconds (re. my previous recent post on this forum... [URL]
Since it will sleep with a minimum installation any ideas on how I can get it to awake from sleep without having to do a hard restart?
If I can get it to awake... then I can trial-and-error it to find out what software is preventing it from going to sleep.
I have the both the bluetooth mouse and keyboard. I've tried pressing the power button on my Macbook and then closing it immediately, this doesn't seem to work. I've also tried to wake it by click on my mouse and tapping on my keyboard. Does this only work on usb wired keyboard/mice? Is there a trick to this?
View 3 Replies View RelatedIs it safe to keep my iMac (i7, 27") awake all the time? I will of course sleep the displays when I'm not at the machine. The main reason is needing the computer to download files overnight in my ISPs 'free off peak' period.
View 8 Replies View RelatedI have a MacBook Pro. When it goes to sleep it doesn't show the login window when I turn it back on. Is there an option for this?
I don't really shutdown my computer much. And anyone can use if it awakes after sleep mode.
I know there's an option for this for your internal drive under energy save, and it makes my computer loads faster, but I still use 4 external drives, and when they fall asleep it takes a few seconds before they wake up and it makes my computer feel old again.
Is there away to keep them awake permanently? And if there is, is this a BAD thing? I imagine it's better than the moving parts going over and over when it's waking up multiple times a day.
Hey, when i turn my laptop on, i get to the password bit and try to type in my password. the keyboard doesnt work and the mouse pad wont work. then a screen comes up after about 30seconds and says that no keyboard is attached, and to attach my wireless keyboard??
it did this once before, but then worked again after a day. now it wont work at all.
Info:
MacBook Pro
Everytime I open something attached to an email or try and downloads something onto my computer, the whole safari shuts down and will not open it. What do I do?
Its only been doing this for about a week, so its not what I am opening as I cant open things I have been able to before.
i just got a macbook pro yesterday and when i was using all of a sudden this came on the screen, and i just restarted it and it was gone. today i turn it on and this happens again. what is wrong with it.
View 10 Replies View RelatedI ordered a VGA cable and a minidisplayport to VGA adapter from ebay, and my lcd keeps saying no signal when I plug in all the cables. I am at a loss as to how to get this to work.
The MBP won't detect any external displays.
Its set up as a profile picture. And its not a very professional picture if an employer were to email me?
Info:
MacBook Air, Macbook Air Mail
When running through a projector to give a presentation the color red has disappeared. The first time it happened I calibrated with the Color Munki and all was well, for a while. Now the Color Munki can't calibrate it anymore. I've tried two different projectors (both work with another laptop)tried two different cables and two different connectors.Also tried different calibrations.Today we ran disk utilities and that worked great, for an hour or two.
Info:
MacBook Pro, Mac OS X (10.5.8)
I have macbook air 13inch 2011 model. 2 days back It wasn't charging and dim green light was showing. I visited service center which is far from where i live.They said battery was short, they removed battery and placed it back and my mac started working. I came back home, next day again same issue. Do you think its charger fault now i don't have correct screw driver to open my mac and unplug and plug battery again. And i cant visit service centre again. Should I get new charger ? Why i faced same problem after visiting service centre they said it wont happen again.
Info:
MacBook Air (13-inch Mid 2011), OS X Mountain Lion (10.8.4)
This started recently and is quite annoying. Like the title says, if I put my computer to sleep via apple menu/sleep while it is attached to my external monitor the computer will not "wake up". When I try to wake up the computer the sleep indicator stops pulsing and I can hear the hard drive start spinning. As a result I must force shut down the computer by holding the power button. The computer is fully charged so it is not a low battery issue. The external monitor is an 20" Apple Cinema Display, it is attached via Apple's DVI connector.
Unplugging the monitor dongle and replugging it in do not work. Pressing any assortment of keys does not bring the display back up.
I've tried resetting PRAM, disk permissions, and verifying the disk.
Info:
MacBook Pro, Mac OS X (10.7.3)
