I have a MBP 2.66 GHz Intel Core i7 and have tryed to connect a Lacie Thunderbolt eSATA Hub to the Thunderbolt port. Â
1 Will it work with the Thunderbolt Display port?Â
2/ Why won't it see and Thunderbolt devices in the Systems Report?Â
Info:
MacBook Pro, Mac OS X (10.7.3)
Since upgrading to 10.5.8, my external WD My Book connected to the MacBook Pro (circa 2006) via a Best Connection JMicron-based express eSATA card has stopped being recognized and listed in the Finder upon boot up.
1) Has any one else had the same experience?
2) How does one remedy the problem?
3) Is it possible to revert back to OS 10.5.7?
Does the macbook pro 2.53 ghz have a thunderbolt port?
Info:
MacBookPro, Mac OS X (10.7.4)
Somebody know does macbook air 11 support USB 3 across thunderbolt port
Info:
MacBook Air, Mac OS X (10.7.3), 1.8 Ghz Intel Core i7
I have 17 inch Macbook Pro with 1 Thunderbolt port. Currently i have an connected an external monitor through thunderbolt port. ( mini Display to VGA Adapter)
Now I want to connect an external hardisk that has a thunderbolt port ? How do I do this?
Info:
MacBook Pro, OS X Mavericks (10.9.4)
thunderbolt port no hardware was found how to fix it
Info:
MacBook Pro, iOS 8.1.1
I have the need to connect an external monitor and a firewire cable to my Macbook Air, but with only one Thunderbolt port I am trying to determine if this is possible. Is there such an adapter that would take my single Thunderbolt port and 'split' it into two?
View 2 Replies View RelatedI bought 2 new Macbook Pro 13' , 2.9 Ghz Intel Core i7, with 8 Go 1600Mhz DDR3, Intel HD Graphics 4000 512 MB, Mac OS X Lion 10.7.4 (11E2617).Â
I have connected a Mini DisplayPort to VGA Adapter in order to show presentations on different LCD projectors but no image appear.Â
The external monitor is detected but no image is shown. I have tried to change the frequencies: parts of the screen appears but no a correct image. I have the same symptoms with the 2 Macbook Pro. Using old Macbook Pro with the same Mini DisplayPort to VGA Adapter, the slides are showns normally.Â
I make a test with a Mini DisplayPort to DVI Adapter and with a Mini DisplayPort to HDMI Adapter and everythings works correctly with both adapters. Â
Info:
MacBook Pro, Mac OS X (10.7.4)
Is there an adapter that will connect an Apple cinema display to a Thunderbolt port?
View 2 Replies View RelatedSo I have 2 USB Ports on my Mac. I use both of them and I am looking to get a Mic for recording youtube stuff. I use one for my wireless mouse, and I use the other for an external hard drive because the amout of space on my Mac is no-where near enough for what I am going to use up.Â
I am just wondering if there is a way I can either:
1. Get more USB ports (if its possible)
2. Hook up my mouse to a Thunderbolt port (again if that is possible)
or 3. Hook up my External Hard-Drive to the thunderbolt port.Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2), I have 2 USB (3.0), 2 Thunderbolt
I have an eSATA drive that was formatted on Windows using Bootcamp. It is connected via an Express Card. I want to now format it for OSX. But when I boot to OSX I don't even see the drive. Is there something I have to do to enable the Express Card?
View 4 Replies View RelatedI know that my Mac-mini (mid-2010) is not supposed to have a Thunderbolt port but, it does. No question about that. Maybe it's a prototype or transitional config.
View 2 Replies View Relatedhad my yosemite upgrade and everything was fine but I notice that Thunderbolt port has stopped working.
View 1 Replies View RelatedI have a new imac with 2 thunderbolt ports - and I want to run a mini displayport cable over a thunderbolt port
Info:
iMac, Mac OS X (10.7.4)
I have the new 15 in MBP and bought a e-sata express card from OWC which is the Apiotek Extreme Dual e-sata [URL]. At first it could not be seen so I went to there site and downloaded the driver for it and got several grey screens of death kernel panics. I know the Sonnet Tempo SATA Pro ExpressCard/34 is supposed to work on the new unibody but after all that I bought to get this system up to the speed I need, was trying to avoid another 280 dollars and want another 4gb Ram chip more. [URL]. I am only running one external drive like this for PS scratch, OS backup and a working drive that is partitioned in 3 sections. Wondering if there is another express card that is working in the new 15 in 2.93 without any issues.
View 24 Replies View RelatedIs there as way to connect to two cinema display on 21.5 mid 2011 iMac with only 1 thunderbolt port?
Info:
iMac, Mac OS X (10.7.3), Cinema display
With my 'old' Intel iMac using a Display Port adapter, my 24" LG Monitor would be detected correctly and worked first time. With my new 2011 iMac 27 using a genuine Apple mini DisplayPort adapter plugged into the Thunderbolt port, this same monitor now shows up as a generic VGA monitor and the range of resolutions is severely reduced - basically it looks terrible. I've tried disconnecting the cable, reconnecting, using the second Thunderbolt, changing resolutions, detecting displays, showing displays in the menu bar. All with no success.
Info:
iMac
I've installed Thunderbolt firmware update 2.1. Now, When I've started again my computer, Macbook Pro with retina display and Macbook Air doesn't work. I've tried install this update with Snow Leopard and Lion system.
View 2 Replies View RelatedI use MBP (late 2011). I find the hunderbolt port to be similar to the mini-display port of older mac. I wish to have another display, but not ready to spend $999 over a thunderbolt display from mac. So would like to know if a Mini-diaplay port converter from apple would help me connect a exernal display via the thunderbolt port?
Info:
MacBook Pro, Mac OS X (10.7.4)
I am unable to get my Macair (2011) to pick up a card reader (with CF card) inserted in a USB slot. Have tried all the Systems Preferences adjustments mentioned in previous posts
Info:
MacBook Air, Mac OS X (10.7.4)
I'm new to Mac and loving it so far. I've been using Windows Vista Ultimate 64 bit for graphic and web design the past several years until I just couldn't take it any longer. Trouble is I had all my client files on an external Seagate hard drive with only an eSATA connection on the device (which I connected to my PC with the included eSATA PCI card.
But apparently my new Mac Pro will only accept PCI-express cards, and I'm having a hard time finding a PCI-express eSATA card that supports a 64 bit OS (I'm using Snow Leopard).
I have a non-jmicron e-sata express card, [URL]
on snowleopard- which means it's non bootable, but it works- yet i was wondering if the drivers were installed right- if i right click on the card icon in the finder it reads Silicon Image and Sil 3132 SATA Link controler.
i miss the expresscard a lot on the 15", but i need as much portable CPU power as possible so upgraded to i7.? i was using expresscard slot for CF reader for my DSL now i never use the SD slotany adapter from CF -> SD port ?or USB port -> SD slot adapter?
View 1 Replies View RelatedI was wondering if there was any improvements choosing an Express Card to eSata over using Firewire 800?
This card states a transfer rate on the card up to 300 mbps which is nowhere near the 800 mbps that Fw800 will give?
The past few months I've made threads asking about eSata express cards and external storage and have received useful information. However, I've always neglected to ask this obvious and direct question. I've been recommended a few cards, one from OWC always comes up. But I never bothered to ask about "dual" versions because I thought I'd be able to find it on my own.
After weeks of casually looking around I wasted a few hours yesterday hard core searching online. I really need a storage solution for my exploding cache of photos and video that's been stockpiling and needs editing.
Perhaps FW800 or another interface could be a better solutions. But when I choose my new MBP 17" a few months ago I specifically kept the fact it retained the express card slot in mind because of it's higher transfer rates.
I'd get 1 TB but I'm thinking realistically I need 2+ TB of storage... and also I think I need to finally get my rear in gear about redundancy. I use Time Machine with an external FW400 HDD and back up my music separately there too but want to keep in mind future space should have redundancy in mind.
My new macpro ( 2014) can't detect SD card reader with all 4 USB port ! I try to test with macbook Pro it's work properly ! What wrong with my USB port ?
View 4 Replies View RelatedOver the last month or so I have been creating much more digital data while on the go and I am looking into a Express Card 34 card reader. The only requirement I have of it is that it is able to read SDHC cards. Would it be better to get something like a 24 in 1 reader that works with SDHC or one that is simpler (and cheaper)? Anyone using a SDHC Express Card 34? Which one?
View 2 Replies View RelatedI have a USB all in one card reader that doesn't seem to work when I connect it to my Macbook. It's an aluminium Macbook running snow leopard.
Ordinarily I would suspect that my �2.99 card reader is faulty and just buy a new one...however I also have an iMac, and it works perfectly with that.
Any ideas on what's wrong with my Macbook??
My wife's Mac Book Pro (around 18 months old) gets an error message when she hooks up our Canon camera. It says the USB is drawing to much power and has been disabled. She has downloaded 1000's of pictures without problems and now that message pops up. And she doesn't have anything extra plugged in since the last downlaod around a week ago. Also the SD card reader isn't working. When the card is plugged in nothing happens and we can't find the card in iphoto. So now she has no way to get the pictures on iphoto. It's not the cord or the card because I can download them without any problem on my Windows computer.
Info:
MacBook Pro
I would like to have two firewire devices connected to my MBP but would prefer not to share bandwidth. If I purchased a firewire express card would that provide me with a 2nd dedicated firewire bus. It seems based the express 34 bus architecture that this would work however.
View 5 Replies View Related