MacBook Pro :: Disk Errors Reappear Within Day After Repair-Hard Drive Dead?
Mar 6, 2012
Over the last few weeks, I have been experiencing crashes on my Macbook Pro. The crash would appear as such: I'll be using Chrome and all of a sudden pages won't load. The mouse continues to work, but if I navigate to the desktop, folder won't open. Then, if I try to quit programs, the dock either becomes unresponsive or programs will only quit if "forced quit." Then the beachball of death appears. The beachball of death will continue for a very long time—perhasp indefinitely, so I decide to manually power down the computer.
I have tried to verify the hard drive in Disk Utility, and a few times I have gotten this error: Volume bitmap needs minor repair for orphaned blocksChecking volume information.Invalid volume free block count(It should be 46122698 instead of 42839276)The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the Mac OS X Utilities window appears, choose Disk Utility. So I restart from the system (command-R) and repair the disk. But now within a day or two I get the same error. Does my hard drive need to be replaced? Am I on borrowed time? My computer is under warranty. Do you think Apple will replace the hard drive?
Info:
MacBook
Pro, Mac OS X (10.7.3), early 2011 13"
View 1 Replies
ADVERTISEMENT
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Apr 11, 2010
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Feb 22, 2010
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies
View Related
Jun 17, 2012
Has any one used Disk Repair on an external hard drive? Does it erase everything?
Info:
Mac OS X (10.6.8)
View 5 Replies
View Related
Jul 17, 2009
So so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.
I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:
'Repair volume failed with error could not unmount disk'
I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:
'"I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus"
So now I pretty much can't do anything with it. Failed Hard Drive?
View 5 Replies
View Related
Mar 19, 2012
I am trying to back up my hard drive to an external (WD My Passport Essential SE) in Disk Utilities (after booting failed). Was getting error-61 until I changed the external format to Mac OS X compatible. But now I am getting an input/output error.
I'm probably going to need to erase my HD and reinstall Lion, so I HAVE to back-up.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 7 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Apr 8, 2012
My MacBook is unable to boot. Whenever I try to boot, the spinning circle and the progress bar appears on the grey screen, but when the progress bar reaches about 40%, the computer shuts itself down. I started in Verbose Mode and tried AppleJack, and it said my harddisk needs to be repaired; but AppleJack is unable to do that. (Error Messages: "Invalid node structure" and "Incorrect number of thread records) I then tried to startup with both Recovery HD and Mac OS X Install DVD and ran the Disk Utility on both of the startups. At the First Aid tab, I selected my Hard Drive (not the Hitachi one, the Macintosh HD one) and clicked on Repair Disk. The error messages I got from Repair Disk were:Invalid volume file countInvalid node structureThe volume Macintosh HD could not be verified completely.
Error: Disk Utility can't repair this disk..disk, and restore your backed-up files. And, lastly, the following popup message appeared:Disk Utility stopped repairing "Macintosh HD"Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Not being sure how to back-up my files using Disk Utility, I plugged in an external HDD to my USB port and clicked on the Restore tab in the Disk Utility. As the Source, I selected Macintosh HD and as the Destination, I selected one of the partitions I created on my external HDD. However, when I clicked on Restore, I got the following error message:Restore FailureCould not restore - Input/output error I partitioned my external HDD by creating 2 partitions formatted in Mac OS Extended Journal - GPT. Now, what can I do to save my files (and my MacBook's HardDisk)?
View 9 Replies
View Related
May 1, 2012
I have removed the 2.5" Hard Drive from my better half's 2006 Macbook and looking at the Seagate I got to replace it the power pins don't appear to line up.
I can't see deep into where it seats. Do you have to replace the HDD with specific makes of 2.5" HDD?
View 11 Replies
View Related
Feb 24, 2012
So my MBP was really making horrible clicking noise and I figured out that my start up Lion OSX disk partition is corrupted. I have three partitions. One for Lion OS X, another for Documents and another for Movies and Downloads. When I run disk utility and verify other two partitions(documents and movies/downloads), they appear to be okay but when I do the same with Lion OS X then it says:
The volume Lion OS X was found corrupt and needs to be repaired.Error: This disk needs to be repaired....then use Disk Utility to repair this disk. Is my hard drive gonna die soon? Or will it be okay if I just format my 500gb hard drive completely and install the fresh copy of Lion OS X again? I don't have a recovery disc or what so ever provided by Apple anymore. I have a DMG installation file of Lion OS X and a USB flash drive(4 GB approx). How can I repair the disk partition without the recovery start up disc?
Info:
MacBook Pro, Mac OS X (10.7.2), 2009 17 inches
View 11 Replies
View Related
Jun 18, 2010
MBP is not starting up or chiming - none of the resets work, been through that yesterday, not even getting to chime. I took the memory out of the MBP and it is running but having a loud bleep every few seconds. Does anyone know what this indicates? does this mean the logic board is ok but the hard drive is dead or could it still be the logic board? If this means the hard drive is dead then I could maybe buy a new one, if it means its the logic board I could recover my files from the hard drive via a hard drive enclosure.
View 6 Replies
View Related
Aug 25, 2014
I am suddenly getting a "The export operation failed to create # of files...." This is happening when I try to export to the Mac HD (Retina 13MBP)
If I export to desktop, I am ok. I have run disc utils verified disc and fixed permissions on the drive...as welll as the permissions on the Ap library, and a rebuild.
I can also export to a connected thunderbolt. It seems to only be the HD and it happens with differet export settings.
Info:
MacBook Pro (Retina, 13-inch, Early 2013), Mac OS X (10.6.4), Apeture, os 10.8.5
View 14 Replies
View Related
Feb 22, 2010
I'm fairly new to macs and am having some problems. Here's the situation:
I've got a 3 year old 13" Macbook - 2.1 Intel Core 2 Duo, 1.83 Ghz, 512MB memory, 60 GB hard drive - I bought it from
Apple directly - it was a ""reconditioned"" one from the factory.
It has worked fine for 3 years, but lately has been getting slower and slower (most programs), and even the home screen has been acting weird, and loading up funny, if at all sometimes, and I get the "spinning beachball of death" much more often and/or for longer periods. I have all my files copied elsewhere, and I just figured I would start over and reinstall the 10.4 Tiger OS that came with it - I have the original grey install/restore DVDs.
In case it matters, the two install/restore DVDs read:
mac os version 10.4.8
AHT version 3AA18
disc version 1.0
22691-5967-A
So here's what I've tried so far:
-I booted up with the install/restore DVDs and have run the hardware checker several times. It says everything is fine.
-Also through the Utilities on the restore disk, i checked/repaired the disks and the "permissions" which showed up in the Disk Utility as the "Mac hard drive" or something like that, about 5 or 10 GB, and the main part of the drive, the "55.9 GB Fujitsu MHV2060BHPL". That all seemed to check out fine as far as the computer could tell me.
-I tried installing Tiger from the restore DVDs, the first time with the "archive and install" option. It seems like everything is working with the installation, and it gets through the second DVD, but when its done, it states that there are "software errors" and to try to install it again. (And no it won't boot up at all on its own...) I tried it again with another of the install options, I think it was "Erase and Install" - same thing. I also tried the "first time install option" too - same thing.
Next, since I got all my info off the computer already, I tried reformatting. First I used the function that writes zeroes over everything, for both the "Mac HD" and the "55.9 GB Fujitsu" drive too. Then I tried all three different install options again, starting with the "initial install" one. I also went into Disk Utility and used the format (and/or partition?) function and the drive has been redone with the mac os "extended journal" format, always with the same result as before. The whole thing (including the DVD test that it runs) seems to go fine with the install, but at the end it always says there are software errors and to try the install again... Is this possibly a hard drive problem (even though it "tests" fine)?
What if I ordered one of these:
Would that work in my macbook? Could I just replace the drive and go for another "first install"? Or is it likely something else?
View 9 Replies
View Related
Dec 4, 2014
My Mac book pro got damaged and no longer works properly. I believe that the hard drive is fine. Is there a inexpensive method of extracting the data from my intact hard drive?
View 2 Replies
View Related
Nov 9, 2010
I'm trying to install Windows 7 on my mac. I'm using bootcamp assistant to try and partition my hard drive, but it gives me an error saying it cannot partition it because of unmovable files or something along those lines. Is there any way to get around it, and if I do use my OSX install disk and run disk utility to repair the drive will my files be deleted?
View 4 Replies
View Related
Feb 20, 2012
My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive?
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 12, 2009
I'm about at my wits end. I would say I have a harddisk failure, but it passes every diagnostic I can throw at the thing. My problem is that I erased the main drive in my mac (been booting from an external hd) and I'm trying to install Leopard on this drive. The Leopard install starts, I'm able to choose the disk, and tell it to erase and install (or just install after erasing the disk externally). The installer starts, gets about 30-40 minutes in and then just plain stops because some package or other (seems to be different every time) is corrupt. My only option is to reboot and try again. I've done it three times now and am starting to feel rather stupid. Is there a known issue here that anyone can direct me at? I didn't see anything snarfing around the forums, but that doesn't mean I could've just plain missed it. I've just finished running tech tool pro 4 hardware tests (drive controller, etc.), surface scan, disk utilities erase and verify hoping it would tell me if there is a disk problem brewing. So far all the tests show green. I decided to try and hit the thing with something that writes to every imaginable space on the disk, so I ran erase free space from disk utilities. I plan on trying again after that finishes.
View 2 Replies
View Related
Apr 8, 2012
I have a 2006 Mac Pro. An aftermarket drive I bought has now thrown up a rather serious bad block error message on my SMART utility app.I have 2 other dives but am a little sad as now I am down on a 2TB drive. (all work safe).Is there anything I can do to this drive or is it now a paper weight?
Info:
Mac Pro, Mac OS X (10.7.2), 3 GHz Quad-Core Intel Xeon
View 8 Replies
View Related
May 12, 2012
can you tell me how to repair system files without formatting my hard disk.
View 7 Replies
View Related
Nov 2, 2008
One of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
View 1 Replies
View Related
Jan 31, 2010
My original white Macbook just died after 3.5 years. It turns on in the sense that the white light works but there is no actual startup. I took it to the Apple store and they told me the logic board would need to be replaced. The computer itself is pretty beat up so I figure it's time for a new one. I plan on buying a Macbook Pro this week. How can I get files off of my old MacBook? The logic board is dead so I can't really do much. Any advice? Thank You. Also, there is no way I want to pay Apple $100 for their One-to-One transfer program.
View 6 Replies
View Related
Feb 9, 2010
Would anybody have any ideas for getting a user account off of a dead hard drive from a Power PC G5? I've heard alot about Disk Warrior but it's a company computer so I won't be allowed to use any software we don't currently own.I was reading freezing the hard drive would help the contraction of the materials and causes whatever is stuck to become unstuck. So I left the hard drive in my car last night in zero degree weather but it didn't help. It still doesn't mount. Any ideas even if they are crazier than putting it in the freezer .
View 6 Replies
View Related
May 3, 2010
If I buy a MBP online (say Macmall) and it shows up with a problem (dead pixel, etc.) can I take it to an Apple store for repair/replacement? Or do I have to return it to where I bought it?
View 2 Replies
View Related
Jan 24, 2010
I HAVE AN EXTERNAL 1TB LACIE FRIVE AND I UNPLUGGED THE DRIVE IN ERROR AND NOW DISK UTILITY SAYS UNABLE TO REPAIR DRIVE AS FOLLOWS
View 4 Replies
View Related
Oct 15, 2007
I have a G5 (Late 2005) and I just bought a LaCie Quadra 500GB hard drive last week and I have it connected with Firewire 800. I was away for the weekend and left the surge protecter unplugged while I was gone. I came home today and plugged everything back in and powered up. My G5 does not recognize the LaCie Drive. It powers on and I can hear it running, but it will not mount on the desktop. I checked the cables and everything is connected.
Information:
G5 Dual 2.3 GHz
Mac OS X (10.4.6)
View 2 Replies
View Related
May 20, 2009
I'm having a series of problems. First some intermittent audio problems with Garageband, then, then some external drives won't mount, and now I can't sync to my disk from the iMac. I've run Disk Utitilies a few times and when I do Verify Disk Permissions, it finds a list of things to fix, I then hit Repair Disk Permissions and it fixes them, and then hit Verify Disk, and it say the disk appears ok. When I do Verify Disk Permissions again though, it finds another long list of things to fix. Is this serious? What should my next step be? Should I reinstall the entire system?
View 2 Replies
View Related
Mar 8, 2012
I have a Intel IMac and I need to repair my hard drive. It tells me to restart with the disc, But 10.7.3 was a download update. Should I use 10.6 snow leopard?
View 1 Replies
View Related
Apr 15, 2009
I have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
Information:
Powerbook G4
Mac OS X (10.4.11)
View 14 Replies
View Related
