OS X V10.6 Snow Leopard :: Has Any One Used Disk Repair On An External Hard Drive
Jun 17, 2012Has any one used Disk Repair on an external hard drive? Does it erase everything?
Info:
Mac OS X (10.6.8)
Has any one used Disk Repair on an external hard drive? Does it erase everything?
Info:
Mac OS X (10.6.8)
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
can you tell me how to repair system files without formatting my hard disk.
View 7 Replies View RelatedSo my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedDisk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
I've been a long time lurker on these forums and you've helped me out numerous times when my computers decided to stop working.
I got my Snow Leopard disk in the post today but unfortunately my disk drive in my Macbook Pro seems to finally be well and truly knackered.
I should be able to borrow a usb/firewire disk drive from a friend, so would I be able to install ok from this external drive, and is there anything I would need to mess around with to make it work?
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Info:
MacBook Pro (13-inch Late 2011)
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible? and easiest.
Info:
MacBook Pro (13-inch Late 2011)
I have a MacBook Air and just bought snow leopard. While I was trying to install it (through the use of the optical drive of my mac mini), a message came up "the disk "macintosh HD" needs to be repaired". Go to the computer with the mac OS X install DVD, open 'remote install mac OS X' (located in the utilities folder in the app folder) and follow the onscreen instructions for restarting your computer using the DVD. When the mac OS X installer opens, follow the onscreen instructions to install mac OS X. during the installation, the installer repairs the disk automatically". I'm worried about losing files on my macbook air (and do not use time machine) so should i be backing my files up?
View 10 Replies View RelatedIs it possible to install Snow Leopard from a disc image on an external drive?
View 7 Replies View RelatedLooking to upgrade to Lion but want to back up to external hard drive first. I have OS X 10.6. Time capsule vs another plug in? I already have wirless via internet service so is Time capsule worth the $ vs another plug in product?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
I have an external hard drive which I first used with my pc. It is formatted for NTFS. Now with my new MBP, I want to back up data, and I am having no luck. The external hard drive is a Verbatim brand, 500GB. On their website FAT32 download dosnt work! I have tried disk utility with no luck. What am I missing?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
I'm having a series of problems. First some intermittent audio problems with Garageband, then, then some external drives won't mount, and now I can't sync to my disk from the iMac. I've run Disk Utitilies a few times and when I do Verify Disk Permissions, it finds a list of things to fix, I then hit Repair Disk Permissions and it fixes them, and then hit Verify Disk, and it say the disk appears ok. When I do Verify Disk Permissions again though, it finds another long list of things to fix. Is this serious? What should my next step be? Should I reinstall the entire system?
View 2 Replies View RelatedI have an Intel Mac Mini running OS X Snow Leopard, the problem is since last November, I've had to use Disk Utility and my Snow Leopard Installation disk to repair my volume because of Permission problems, at least 3-4 times. And I know I shouldn't have to do this!
View 1 Replies View RelatedI repaired my disk premmisons on my mac, but in the history it says, Warning:Suid File "System/Library/core....as been modified and will not be repaired
View 3 Replies View RelatedThis is a major issue for me, as I feel like I'm going to end up damaging my hard drive.
I am downloading a legal torrent to my external hard drive, however when I quit Transmission and try to eject my external drive, nothing happens. Snow Leopard doesn't even say it is in use like it is meant to. It just does nothing to eject the drive.
So I end up having to yank the USB plug out.
What gives? It ejects normally as long as I don't download to it.
I have no id� whats wrong, I want to install Snow Leopard(from the external) on my Core2duo Macbook pro, which is running Leopard at the moment.
I have a Snow Leopard image, and I have used Disc utility to partition the external hard drive (GUID), and I assume the partition and install went well on the external, because in Disc start the external appears as OSX 10.6.
Then the problem: The macbook wont boot from the newly made external it just gives me this sign (of course without the colours).
I have tried to start the macbook normal, and with the option key held down were the external pops up.
I have also tried to chose the external in disc start and reboot with no luck.
I have tried to start the Snow Leopard install(external) within Leopard where the install start fine, but when it reboots and wants to continue the install, the sign appears.
The external harddrive is a 5400rpm 40gb 2,5" which is only powered by the usb port maybe thats the problem?
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion?I would like to use the external on a permanant basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
Over the last few weeks, I have been experiencing crashes on my Macbook Pro. The crash would appear as such: I'll be using Chrome and all of a sudden pages won't load. The mouse continues to work, but if I navigate to the desktop, folder won't open. Then, if I try to quit programs, the dock either becomes unresponsive or programs will only quit if "forced quit." Then the beachball of death appears. The beachball of death will continue for a very long time—perhasp indefinitely, so I decide to manually power down the computer.
I have tried to verify the hard drive in Disk Utility, and a few times I have gotten this error: Volume bitmap needs minor repair for orphaned blocksChecking volume information.Invalid volume free block count(It should be 46122698 instead of 42839276)The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the Mac OS X Utilities window appears, choose Disk Utility. So I restart from the system (command-R) and repair the disk. But now within a day or two I get the same error. Does my hard drive need to be replaced? Am I on borrowed time? My computer is under warranty. Do you think Apple will replace the hard drive?
Info:
MacBook
Pro, Mac OS X (10.7.3), early 2011 13"
I am having problems with a partition that I use as my Time Machine backup. I have searched various previous discussions but can't seem to find a solution. My HDD is split into 2 partitions and the Time Machine one doesn't mount, the other works fine. When I try to mount it using Disk Utility I get the error message: "The disk X could not be mounted. Try running First Aid on the disk and retry mounting". Then without doing anything else I get another message "Mac OS X can't repair the disk X. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can." Which disappeared after a few seconds and the partition mounted. When I try to repair the disk I get the above error message and another: "Disk Utility stopped repairing X. Disk Utility can't repair this disk. Back up as many files as possible, reformat the disk, and restore your backed up files." This appears after it says 'Updating boot support partitions…'. When mounted, I can open it in Finder, but when I try to copy 'Backups.backupdb' I get a message saying "The operation can't be completed because it isn't supported." This is the same for 'X's Computer' and each backup folder. I can copy files and folders in each backup folder but this would be very tedious and probably Time Machine wouldn't be able to use the resulting files. I have tried restoring the partition, through Disk Utility, to another HDD, but it just copies across the error. Disk Utility has been rather buggy as well, hanging on various operations involving the partition.
Info:
MacBook Pro, Mac OS X (10.6.8)
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion? Any hints on where to start? I would like to use the external on a permanent basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
When I was copying my picture folder to external hard drive I stopped it now I dont see my orginal files on my computer. Say hidden files
Info:
MacBook Pro, Mac OS X (10.5.8)
I've been having this problem for a while now and its only with images and videos when i try to open any picture or video this msg comes up "The file couldn’t be opened because there is no such file" and i can only open it if i copied the file from my hard drive to my computer.when i open the info for the same picture (one in on the hard drive and one my computer) the one on the hard drive has nothing under "more info" while the one on my computer has a lot of details under "more info" .
Info:
MacBook, Mac OS X (10.6.8)