OS X V10.7 Lion :: Macbook Cannot Boot: Hard-disk Repair / Restore Error
Apr 8, 2012
My MacBook is unable to boot. Whenever I try to boot, the spinning circle and the progress bar appears on the grey screen, but when the progress bar reaches about 40%, the computer shuts itself down. I started in Verbose Mode and tried AppleJack, and it said my harddisk needs to be repaired; but AppleJack is unable to do that. (Error Messages: "Invalid node structure" and "Incorrect number of thread records) I then tried to startup with both Recovery HD and Mac OS X Install DVD and ran the Disk Utility on both of the startups. At the First Aid tab, I selected my Hard Drive (not the Hitachi one, the Macintosh HD one) and clicked on Repair Disk. The error messages I got from Repair Disk were:Invalid volume file countInvalid node structureThe volume Macintosh HD could not be verified completely.
Error: Disk Utility can't repair this disk..disk, and restore your backed-up files. And, lastly, the following popup message appeared:Disk Utility stopped repairing "Macintosh HD"Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Not being sure how to back-up my files using Disk Utility, I plugged in an external HDD to my USB port and clicked on the Restore tab in the Disk Utility. As the Source, I selected Macintosh HD and as the Destination, I selected one of the partitions I created on my external HDD. However, when I clicked on Restore, I got the following error message:Restore FailureCould not restore - Input/output error I partitioned my external HDD by creating 2 partitions formatted in Mac OS Extended Journal - GPT. Now, what can I do to save my files (and my MacBook's HardDisk)?
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
My Macbook crashed so I tried everything to restart it. what finally worked is opening it from the install disk. I performed a "repair disk", and after saying "invalid node structure" and "invalid record count", it says it cannot repair the disk. I don't know what step to take next. How do I see if time machine has backed my files up? Do I need to erase the HD and reinstall?
I just tried to verify my HDD, and Disk Utility said: Invalid node structure. Volume check failed. Error: Filesystem verify or repair failed. Now when I tried to reboot my Macbook, the gray Apple comes up and so does the spinning wheel, but after a couple of minutes, it shuts down.
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive” Checking file system Volume repair complete. Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Yesterday I decided to Install Windows Xp on my Mac. I tried to partition it but BootCamp said, "Verifying failed. BootCamp can't partition disk." So I started reading about this problem on the Internet and I found out that I have to use the Mac OS X Installation Disk and use the Disk Utility to "Repair" the disk. I started Disk Utility and clicked "Repair". Many files were missing so it tried to repair it. So now when I start the Apple-logo and the loading-circle is "frozen", so it just loads and loads and loads and loads, and nothing happens. I decided to format the disk from Disk Utility but I can't format it! I can't do nothing! So now I cant start my Mac! If it is possible to take a backup or something before I format it, or keep the files it would be lovely!
My Macbook is starting to get really slow. I've tried Onyx and it told me that the startup volume had to be fixed. But I can't boot my install DVD by pressing "C" in the startup.
Problem: MBP frozen on boot up screen with Apple logo and turning gear (which freezes after a while aswell)
Solutions attempted: disk repair via custom recovery- disk utility, PRAM
Device: MacBook Pro 15" (early 2010) running 10.9
Additional info-
Never had any issue with the device and this seems to have happened all of a sudden. Installed an SSD a few months ago, and just realised the ssd did not have a recovery partition. However I connected my older hardrive via USB to access recovery which seemed to work fine.
NOTE: for the past few weeks, every now and then I was unable to power the device off and whenever this occurred, there seemed to be a few bugs (ie unable to empty thrash-error 50 and enable to increase/decrease volume/screen brightness). However, holding the power button and restarting it seemed to have fixed it.
Had the same issue but this time around MBP failed to boot up.
My older MBP is running very slow, and I have tried all the usual ways of making it run quicker - repair permissions, repair disk from Lion recovery partition, remove extraneous files, checking Activity Monitor, etc. etc. Someone suggested reformatting the HD and then restoring from a backup. I have the HD cloned to an external HD with Super Duper, but if I reformat the internal HD and restore from the clone, won't the problems that caused the issue in the first place just be cloned into SD and then restored to the reformatted internal drive, thus defeating the excercise?
I ran a fix permissions today, and got the following errors. I have no idea what they mean, and am a bit concerned. Anybody have any idea what this stuff means?...
Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened... I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode until i removed the 3.5mm audio cable of my speakers from the audio out port!
I just tried to use my MacBook pro but its showing a loading bar and it loads for like 5% and then shuts down.I read the instruction booklet and it says that I should tried to repair the disk or reinstall Lion but when I tried to repair it stops the process and when I try to reinstall its telling me that the disk is Locked...
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
Over the last few weeks, I have been experiencing crashes on my Macbook Pro. The crash would appear as such: I'll be using Chrome and all of a sudden pages won't load. The mouse continues to work, but if I navigate to the desktop, folder won't open. Then, if I try to quit programs, the dock either becomes unresponsive or programs will only quit if "forced quit." Then the beachball of death appears. The beachball of death will continue for a very long time—perhasp indefinitely, so I decide to manually power down the computer.
I have tried to verify the hard drive in Disk Utility, and a few times I have gotten this error: Volume bitmap needs minor repair for orphaned blocksChecking volume information.Invalid volume free block count(It should be 46122698 instead of 42839276)The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the Mac OS X Utilities window appears, choose Disk Utility. So I restart from the system (command-R) and repair the disk. But now within a day or two I get the same error. Does my hard drive need to be replaced? Am I on borrowed time? My computer is under warranty. Do you think Apple will replace the hard drive?
Info: MacBook Pro, Mac OS X (10.7.3), early 2011 13"
So my MBP was really making horrible clicking noise and I figured out that my start up Lion OSX disk partition is corrupted. I have three partitions. One for Lion OS X, another for Documents and another for Movies and Downloads. When I run disk utility and verify other two partitions(documents and movies/downloads), they appear to be okay but when I do the same with Lion OS X then it says:
The volume Lion OS X was found corrupt and needs to be repaired.Error: This disk needs to be repaired....then use Disk Utility to repair this disk. Is my hard drive gonna die soon? Or will it be okay if I just format my 500gb hard drive completely and install the fresh copy of Lion OS X again? I don't have a recovery disc or what so ever provided by Apple anymore. I have a DMG installation file of Lion OS X and a USB flash drive(4 GB approx). How can I repair the disk partition without the recovery start up disc?
Info: MacBook Pro, Mac OS X (10.7.2), 2009 17 inches
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
Can't access to mac os x utilities to repair disk from a macbook pro 15" with lion. When I restart holding command key + R it would get stuck in a grey screen after the apple appears.
I have a early 2011 macbook pro and the internal hard drive failed. I installed OS X mavericks on an external hard drive (1) and I boot from the external drive (1). On a different external hard drive (2), I have a disk image of my macintosh HD (the computer's original hard drive with all my data on it) How do I go about restoring from the disk image on the external drive(2) to external hard drive (1)?
I want to be able to boot from the external hard drive (1) and have all my data that I backed up as a disk image on external hard drive (2)
Info: MacBook Pro, OS X Mavericks (10.9.4), early 2011 macbook
I need help about boot camp..I was trying to partition my MBP but it's not working because of an error.
"The disk cannot be partitioned because some files cannot be moved" Back up disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again"
Can anyone explain to me what to do? I seriously want to have Windows 7 on my mac so I could play Starcraft II much better.
I have a Macbook pro and when I turn on the computer the message: "NO bootable devices, insert a boot disk and press any key" appears. I click the button "alt" and I choose the option Macintosh HD and the computer works. But I can't do this procedure always. This problem started after install the Paragon software to save my files on the external hd. How can I fix that?
Steps to reproduceOpen Disk Utility Drag an ISO image into the left sidebar Insert an USB Stick with enough space to contain the image Go to any restore tab in Disk Utility Drag the ISO file to the source Drag the Volume from the USB drive to the destination Check erase destination Hit restore
Results for me are (in any number of varieties to do this) either "Invalid argument" or in the log "Could not validate source - error 254".
Today is a bad day. My old 24" iMac has finally died it looks like and is experiencing the Gray Screen Of Death. I did have an external backup drive using time machine, so I was just going to restore it to my other iMac, but I can't find my boot disk.
I know how to do it with the boot disk, but is there any way to do it without one? I just want to restore the whole thing.
So so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.
I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:
'Repair volume failed with error could not unmount disk'
I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:
'"I0ATAController device blocking bus I0ATAController device blocking bus I0ATAController device blocking bus I0ATAController device blocking bus I0ATAController device blocking bus"
So now I pretty much can't do anything with it. Failed Hard Drive?
I have a 2.3 GHz Intel Core i5 Mac book Pro, I changed the hard disk once, and now when I tried to update it, it always says "An unexpected error occurred" And the only button for me is the "Restart button" (Remember, I always have my Wifi on). Is it because of the hard disk changing or because of something else?
I was doing a routine maintenence and Disk Utility is telling me I have a few block counts askew. Everything seems to be working fine ( on the surface of things ) but like to be anal and would like to do a repair. However, I don't have a Recovery partition and the App store has decided that I haven't purchased Lion although I did, I can show you the bank statement. I installed a new hard disk not so long back ( I guess this is the reason why the App store decided I didn't purchase Lion!? ) and reinstalled from a Time Machine backup it wasn't seemless but I'm techy enough, to make it work, just not a big fan of spending my days learning terminal commands.I have a mid 2009 MPB so can't do internet recovery, the Recovery Disk Assistant won't let me create a Recovery Disk on an exernal drive since, yes you've guessed it, I don't have a Recovery Partition.
Am quite happy to reinstall as long as it doesn't compromise my data but can't find the 'restore my purchases' button on the app store else if there is a less than obtuse ( and none-sketchy ) method of creating the partition HD.
