My Mac book pro got damaged and no longer works properly. I believe that the hard drive is fine. Is there a inexpensive method of extracting the data from my intact hard drive?
View 2 RepliesToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Would anybody have any ideas for getting a user account off of a dead hard drive from a Power PC G5? I've heard alot about Disk Warrior but it's a company computer so I won't be allowed to use any software we don't currently own.I was reading freezing the hard drive would help the contraction of the materials and causes whatever is stuck to become unstuck. So I left the hard drive in my car last night in zero degree weather but it didn't help. It still doesn't mount. Any ideas even if they are crazier than putting it in the freezer .
View 6 Replies View Relatedmy few months old 13" macbook pro (4gb ram, 500gb hard drive) was destroyed by liquid damage the other day . i was told the hard drive may be salvageable and that it would be easy enough to install in a new macbook by myself. however, i've been thinking of using the cost of a new macbook to buy a second- hand macbook pro instead. i presume i wouldnt be able to install the old hard drive on a macbook pro would i? if not then how would i transfer the data to it from the old one?
View 2 Replies View RelatedToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes... I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before. Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer. I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps. I tried plugging the hard drive into an iMac as well, but it did not show up either.
My old time machine drive (250GB) seems to have died. I have a new drive (1TB). How do I:
1. get data off the old drive?
2. set up the new drive?
Info:
iMac, Mac OS X (10.6.8)
I have lost all my data from my harts drive. The laptop is under warranty. I have been told that they have replaced my hard drive but could not get any data off the old one. I have now lost all my data, photos, files, music etc. NO backups, only simply because i did not know how to do them. Is there any way of getting the files back? All my work spreadsheets and accounts were also lost.
Info:
MacBook Pro (13-inch Mid 2012)
I have removed the 2.5" Hard Drive from my better half's 2006 Macbook and looking at the Seagate I got to replace it the power pins don't appear to line up.
I can't see deep into where it seats. Do you have to replace the HDD with specific makes of 2.5" HDD?
MBP is not starting up or chiming - none of the resets work, been through that yesterday, not even getting to chime. I took the memory out of the MBP and it is running but having a loud bleep every few seconds. Does anyone know what this indicates? does this mean the logic board is ok but the hard drive is dead or could it still be the logic board? If this means the hard drive is dead then I could maybe buy a new one, if it means its the logic board I could recover my files from the hard drive via a hard drive enclosure.
View 6 Replies View RelatedI'm fairly new to macs and am having some problems. Here's the situation:
I've got a 3 year old 13" Macbook - 2.1 Intel Core 2 Duo, 1.83 Ghz, 512MB memory, 60 GB hard drive - I bought it from
Apple directly - it was a ""reconditioned"" one from the factory.
It has worked fine for 3 years, but lately has been getting slower and slower (most programs), and even the home screen has been acting weird, and loading up funny, if at all sometimes, and I get the "spinning beachball of death" much more often and/or for longer periods. I have all my files copied elsewhere, and I just figured I would start over and reinstall the 10.4 Tiger OS that came with it - I have the original grey install/restore DVDs.
In case it matters, the two install/restore DVDs read:
mac os version 10.4.8
AHT version 3AA18
disc version 1.0
22691-5967-A
So here's what I've tried so far:
-I booted up with the install/restore DVDs and have run the hardware checker several times. It says everything is fine.
-Also through the Utilities on the restore disk, i checked/repaired the disks and the "permissions" which showed up in the Disk Utility as the "Mac hard drive" or something like that, about 5 or 10 GB, and the main part of the drive, the "55.9 GB Fujitsu MHV2060BHPL". That all seemed to check out fine as far as the computer could tell me.
-I tried installing Tiger from the restore DVDs, the first time with the "archive and install" option. It seems like everything is working with the installation, and it gets through the second DVD, but when its done, it states that there are "software errors" and to try to install it again. (And no it won't boot up at all on its own...) I tried it again with another of the install options, I think it was "Erase and Install" - same thing. I also tried the "first time install option" too - same thing.
Next, since I got all my info off the computer already, I tried reformatting. First I used the function that writes zeroes over everything, for both the "Mac HD" and the "55.9 GB Fujitsu" drive too. Then I tried all three different install options again, starting with the "initial install" one. I also went into Disk Utility and used the format (and/or partition?) function and the drive has been redone with the mac os "extended journal" format, always with the same result as before. The whole thing (including the DVD test that it runs) seems to go fine with the install, but at the end it always says there are software errors and to try the install again... Is this possibly a hard drive problem (even though it "tests" fine)?
What if I ordered one of these:
Would that work in my macbook? Could I just replace the drive and go for another "first install"? Or is it likely something else?
My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive?
Info:
MacBook, Mac OS X (10.6.8)
Over the last few weeks, I have been experiencing crashes on my Macbook Pro. The crash would appear as such: I'll be using Chrome and all of a sudden pages won't load. The mouse continues to work, but if I navigate to the desktop, folder won't open. Then, if I try to quit programs, the dock either becomes unresponsive or programs will only quit if "forced quit." Then the beachball of death appears. The beachball of death will continue for a very long time—perhasp indefinitely, so I decide to manually power down the computer.
I have tried to verify the hard drive in Disk Utility, and a few times I have gotten this error: Volume bitmap needs minor repair for orphaned blocksChecking volume information.Invalid volume free block count(It should be 46122698 instead of 42839276)The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the Mac OS X Utilities window appears, choose Disk Utility. So I restart from the system (command-R) and repair the disk. But now within a day or two I get the same error. Does my hard drive need to be replaced? Am I on borrowed time? My computer is under warranty. Do you think Apple will replace the hard drive?
Info:
MacBook
Pro, Mac OS X (10.7.3), early 2011 13"
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies View RelatedI have a 2006 Mac Pro. An aftermarket drive I bought has now thrown up a rather serious bad block error message on my SMART utility app.I have 2 other dives but am a little sad as now I am down on a 2TB drive. (all work safe).Is there anything I can do to this drive or is it now a paper weight?
Info:
Mac Pro, Mac OS X (10.7.2), 3 GHz Quad-Core Intel Xeon
Suggested to move the original files to the EHD and leave the referenced files on the laptop to save space and still allow edits. My question is, if you are using Time Machine, what is it backing up on the LT and how do you apply this to the data on the EHD?
What I am trying to achieve is to move my Aperture library to an external HD. and clone it to a second drive and backup the laptop with Time Machine. After the next session I would again clone the 1st drive and rely on TM to continue to backup the LT.
Yesterday i spilled water all over my 13' macbook pro (oops!). Tomorrow i am going to the macstore to buy a new 13' macbook pro. My current notebook is almost two years old, runs moutian lion and has my very important paper on it. Will i be able to take the hard drive out of that one and put it in my new laptop?
Info:
MacBook Pro, Mac OS X (10.7.3)
One of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
My original white Macbook just died after 3.5 years. It turns on in the sense that the white light works but there is no actual startup. I took it to the Apple store and they told me the logic board would need to be replaced. The computer itself is pretty beat up so I figure it's time for a new one. I plan on buying a Macbook Pro this week. How can I get files off of my old MacBook? The logic board is dead so I can't really do much. Any advice? Thank You. Also, there is no way I want to pay Apple $100 for their One-to-One transfer program.
View 6 Replies View RelatedIt's running the drive, but nothing happens. Replaced hard drive and laptop will not boot up. I've changed it before so I know I've installed it correctly.
Info:
MacBook, Mac OS X (10.6.8)
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Could any readers recommend an affordable basic external hard drive for a macbook air, which would also serve as a back-up for my old pc laptop? I don't need it to be portable, just to serve as back-up at home, though if it doesn't escalate the price too much wireless would be a bonus. I see there is a vast range of products available at a vast range of prices
View 1 Replies View RelatedI have a G5 (Late 2005) and I just bought a LaCie Quadra 500GB hard drive last week and I have it connected with Firewire 800. I was away for the weekend and left the surge protecter unplugged while I was gone. I came home today and plugged everything back in and powered up. My G5 does not recognize the LaCie Drive. It powers on and I can hear it running, but it will not mount on the desktop. I checked the cables and everything is connected.
Information:
G5 Dual 2.3 GHz
Mac OS X (10.4.6)
I want to find the best way for a new college student to back up her MacBook Air files. Can she use cloning software and an external hard drive? I'm unclear if the Air supports attaching an external hard drive.
View 7 Replies View RelatedI have a 2011 macbook that has a motherboard that is broken, and that macbook has a terabyte Hard drive that was put in about a year ago after a broken hard drive was removed. Now I have bought a brand new macbook same model and I was advised by the apple store to take the old TB hard drive and swap it with the one in the new computer. I just want to know if by doing this I'm going to loose all of my files and programs by just swapping them. I have no back up anywhere just the files on the hard drive in the broken computer. So am I going to loose all of the files on the hard drive when I swap it? or will I have to get it backed up some how? They are both running Mavericks
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Had a hard drive failing/failure. I am having my bad hard drive replaced with a bigger hard drive. (New Obviously) I have an iMac. (1.83GHz Intel Core 2 Duo 17-inch) To have my data transferred from the old drive will cost over a hundred bucks more. I am trying to save money but transferring it myself. All im looking to transfer is my photos. I did not have an external drive but i WILL purchse one now. My question, (to save some money) is how would i transfer my old pictures from my old drive, too my new installed hard drive. Can i use USB? Firewire?
View 2 Replies View Relatedi will change my HD in my MBP 13" 2.26 GHz Intel Core 2 Duo, Memory 4GB. The standard HD is a 150GB but i want to change to a 500GB 7200RPM, my only concern is how can i transfer all the data from the 150GB to the new 500GB?
View 6 Replies View Relatedjust bought a new hard drive from OWC 500 GB 7200rpm, want to install it in my 15in unibody macbook pro june 2009. Bought the kit that came w/ the inclosure so i can turn my old drive into an external.
Here's my question
is there a way i can move all my data to my new hard drive before putting it into the computer, so once its in its ready to go? I don't have the leopard disc w/ me. I left it at home and didn't bring it back to school w/ me.
brought my mbp core 2 duo (2008) to the genius bar today and they said I needed a new logic board... I want to transfer all my data from the hard drive to an imac via a usb 2.0 to ide&sata cable - I took the hard drive out of the mbp, connected it to the cable - the usb side which is plugged into a 2010 imac light is on but no light is on the sata side and the ide/busy light is not on... the drive is not showing up anywhere on the imac.
Info:MacBook Pro (15-inch Early 2008), Mac OS X (10.5.8)
My MacBook 2.1 (2006) recently had an accident with a glass of water and died. I just purchased a brand new MacBook running Version 10.7.3, and I'd like to see if I can rescue any of the data on the old MacBook. At the Apple store, they said I'd need to purchase an enclosure to run the old hard drive as an external drive, but they weren't able to give me specifics as to what kind of enclosure I would need to purchase. Can anyone recommend a specific enclosure that would work with those two computers for data transfer (assuming anything can be rescued)?
Info:MacBook, Mac OS X (10.7.3)
I have an iBook 500Mhtz PPC G3, 384 RAM, 10GB HD, Dual USB. Several months ago, I opened it up and it simply would not start up. No start up sound, no noise from the fans/HD/anything, motionless. Completely dead. I've held (many times) the PMU, and tried almost anything. Is there anything else I can do to get it to AT LEAST turn on? The battery is dead, and the charger is fine, but the battery won't charge. I tested the charger on a PB G4. I'd rather sell the whole computer as a working computer. I figured I'd get more money that way. do I need to sell it for parts?
View 3 Replies View Related