MacBook :: Screen Brightness Level Down All The Way
Apr 7, 2010
I dropped my laptop on a tile floor and the bottom hit it flat. my computer works fine besides the fact that my computer screen's brightness is as if my brightness level was all the way down.
So I have noticed a few times already, that the screen on my white macbook flickers to change the brightness level. It can do this while the computer is plugged in and charging, or if it's off the charger. It is definitely noticeable as it causes me to just watch what the screen is doing.
Excluding sitting outside in the sun or in very dark rooms, what level do you usually keep your MBA brightness level at and what kind of battery life do you get? I've got mine set to about 65%, haven't used it enough to know what kind of life I get.
i keep my MPB on 1/16 brightness level in low light, and it took me more than a month to get used to. What is the highest level of brightness you can tolerate in low light conditions?
I dont want to sound too sensitive but sometimes it looks almost too bright even on min settings.
I am looking to purchase an external monitor for my unibody macbook pro, and I love the (maximum) brightness level on it, and would like the same on my external monitor. Does anyone know what the cd/m2 rating is?
Under normal office lighting, I find anything other than 100% brightness seems too dark. But I've been getting huge amounts of eye strain so am wondering whether to turn in down some more, say to 50-75%, but worried that will strain my eyes even more. What do you guys have your 13" set to, assuming good ambient lighting?
i got a question about adjusting the brightness level on iMac.
i adjust the brightness to lowest but each time i restart or turn the computer back on, the brightness level would set back to highest. Is that for all the imac? is there a way to set it?
The brightness goes up when you plug in your MBA, but then over time it just goes up and up. I honestly like my brightness pretty low (rarely more than half, typically at 3-5 notches), but it just keeps on going up and up. I almost never set it above half, but multiple times a day, I notice that it looks pretty high and it's at like 3/4 so I put it it down to about 1/3, but after a while, it's just up again.
Anyone else notice this? What is it, why does it do this? How can I fix it? I don't mind not having auto-brightness (even though I loved it), as long as my screen doesn't keep going up.
So I installed Vista 64 bit on my Macbook Pro (Santa Rosa), I installed most of the drivers I can find, but I cant get the screen brightness buttons to work (F1 and F2)
I have dual ACD's. How do I make it so that both screens have the same brightness? If I adjust the brightness in the display settings it adjusts the main screen, but then not the other one. How do I make them the same?
I have an aluminum macbook 2.0 if it helps but I have a question. I have my macbook at full screen brightness but aren't you suppose to get even more brightness like another level when you connect the ac and my birghtness doesn't even move. Also I feel my macbook screen is not as bright as it used to be any way to make it brighter or may I have just get used to my macbook?
I had a quick question about the screen and how it dimms at wierd times.like the screen to be on the brightest possible setting but some times it dimms to a lower level. Why is that? Does it have to do with the light in my room?
Has anyone noticed a very slight flicker on their new MBPs? I have a new 13" and, every so often, the screen brightness dims and then brightens very quickly (happens in less than a second).The option for auto-adjusting the screen brightness is off so it's not that particular function.It's most noticeable on all-white backgrounds both on AC and battery power. Hard drive access doesn't seem to coincide with the dimming.
lately, my mba has been behaving a little weirdly. its screen would suddenly become a little dimmer when the brightness in the room has not changed a bit. after a long while(15 min?), it'll turn brighter again by itself, and again without any change in the lighting of the room. the change is not big but obviously. any idea? can it be some software? or setting? or a defective light sensor?
Recently, after about 5 minutes of use (not sitting idle), my MacBook's screen will go very dim. I hit the buttons on the keyboard to take the brightness all the way up, but it doesn't get much brighter and there's only one thing that I can do to make the screen go brighter: I go into System Preferences and click Display. The second I click that, the brightness returns without me doing anything in the Display section, so after Display comes up, I just close it out and the screen brightness is fine for a while. It seems to do this after the lid has been closed for a while and then starts dimming again after opening the lid and using it for about 5 minutes. Is there a way to fix the auto-dim mode without disabling it? MacBook (white) is running Leopard 10.5.8 with all the latest updates.
I wanted to check out Windows 8 so i decided to install it using Bootcamp on my Macbook Pro. I installed it successfuly, along with the Windows Bootcamp drivers, but my Display is VERY dim, the brightness is all the way up to the Mac. I rebooted the Macbook Pro and ran OSX and the brightness is fine, but on windows is very very dim and idk how to fix it.
When I push the brightness key on the keyboard, the appropriate image comes up on screen and goes to full brightness, but the actual brightness of the screen doesn't change and the lack of change is reflected correctly on the brightness slider in System Preferences.
I am just wondering if there is a way to have a brightness preset for when the macbook is plugged into the wall and running on battery?Eg. When plugged in I want 100% prightness, but when running off battery it automatically lowers the brightness.Right now I manually lower it and some times forget.. especially times when I need that extra bit of battery power
I have the aluminum MacBook (<3) and it is often found on my desk, in front of my aluminum desk lamp. I was writing a paper and had one hand on my touchpad and touched my (off, but plugged in) light with my other hand. My screen dimmed just a little bit, approx the brightness between the two highest lighting levels. Even when not touching my touchpad, just touching my light, my screen did the same thing. Depending on WHERE on the lamp I touch, it affects the brightness... but only on the bell surrounding the light bulb, no other components of the light.
I don't know if anyone posted this issue before. I can not control screen Brightness on my MBP 13'. I tried my F1 and F2 key and the Nvidia Control Panel, either of them is working. I installed all the drivers from the CD and it can actually show the icon in the center(bottom) of the screen when I hit the F1 or F2 Key. However, the brightness adjust does not work,the screen stay the same.
Just bought a brand new 15" MBP, and immediately after unboxing the screen brightness seems to just move/adjust without adjusting via brightness buttons.
I have a macbook and a screen plugget to it. Now I use just the new screen and don't use the macbook one. But every time I turn the mac on the macbook screen turns on, and I have to decrease the brightness manually every time. (cause it's a waste of energy to keep it on if I don't use it). So I'd like to know to set the screen brightness to 0 by default, so I don't have to turn the brightness down every time.
(Electricity as in AC power.) I've been using the brightness controls (F keys) to turn off the screen at night and leave my computer running. I just assumed it uses less AC power that way and I'm saving some electricity but I don't know a lot about electricals to confirm my theory. Does anyone know?