I've recently purchased a spanking new macbook pro and am keen to lay some tracks down in garageband. I need a cheap but good quality audio interface so's I get get my guitar riffs onto the mac.
View 18 RepliesI am using a recommended M-Audio, Fast Track interface for home recording on GarageBand. All aspects of the interface work really well except that my recorded tracks, which play back very loudly on my Companion 3 system but when I switch to the headphones on the interface, the volume decreases greatly. I'm not sure what the "Monitor on/off" on Garageband does as it has no effect?
View 1 Replies View RelatedAnyone have a good recommendation for a USB audio interface for the 11" MBA?
I have some nice headphones and would prefer to get some decent D/A conversion in as small a package as possible.
I bought a new MacBook yesterday, downloaded Logic 9 and installed the USB drivers for my Saffire 6 USB audio interface but cannot locate it in either the system preferences or the Logic 9 audio preferences. How do I get this working ?
Info:
MacBook Pro (13-inch Late 2011)
is anyone using their MBPs internal audio interface to convert and record audio into ProTools, Logic, or Record...?
if so how does it sound?
I'm wondering if I somehow have a bad firewire chip in my MBP. It hasn't been able to work with firewire audio interfaces.
- I tried a Metric Halo ULN 2 which loses sync with it's audio. It will be fine for a few minutes with itunes but then becomes distorted and ringy as if it's lost it's audio sync.
- Random kernel panics while using Logic 9, Garageband 11 with an Apogee Duet - all software fully updated. One time it froze while not doing anything - logic was simply open and sitting there. Using iTunes through the Duet seems fine.
- Pops and crackles using Presonus Firestudio.
I've tried wiping my software and reinstalling everything. I'm using a MBP 5,3 2.8Ghz Core 2 Duo 4GB RAM, Snow Leopard (10.6.5) with the latest updates. I'm going to try an Apogee One which is USB, but I'd really like to use a firewire interface. If there's something wrong with my firewire port, I'd like it taken care of. My machine is under applecare 3 year warranty. I don't think this is an easy thing to prove though.
Today I connected my Mackie Onyx Satellite Firewire audio interface to my 2.4 Ghz 13" Macbook Pro for the first time. After it had been running for a while, I looked at iStat Pro, and it reported a CPU temperature of 67C, which is about 15 to 25 degrees hotter than this machine usually idles. Now I've looked around a little bit and found that it's a known issue and associated with the Agere Firewire chipsets. Is there any solution for this? Does it make a difference if you use a daisy chain setup with an external hard drive in between the computer and the audio interface, or a repeater cable, or anything of that nature?
View 24 Replies View RelatedWhen I'm at home, I usually use an E-MU 0404 USB audio interface to channel sounds from my MBP. The problem is that every time I turn on the interface, the sound is distorted and corrupt. It is not a problem with the hardware; my monitors and interface work properly. The only workaround is to restart the computer with the interface connected and on, which clears up the sound. However, this is very inconvenient to do every time and I think that it's most likely due to a sound driver issue.
Information:
2.66 15" unibody MBP,
10.6.1
I'm looking for a good quality Audio Interface for my iMac, i work with MIDI only so i won't be needing tons of ins & outs for vocals, mics, live instruments etc, the only thing I'll be needing to connect is a Digital Piano (MIDI ports) and a pair of Monitor Speakers. what are the best AI brands out there for a iMac ?
View 3 Replies View Relateddid anyone ever got a chance to work with Saffire LE on XP using bootcamp? I searched all over the place, found some patches and solutions, but nothing works Just ridiculous.
View 4 Replies View RelatedI have been trying to use an audio interface unit, Lexicon Omega, with my macbook on garageband and have not been able to.
According to Lexicon, I should be able to connect the hardware and it will pop up in my audio devices...but this hasn't happened.
On a possibly related note, my audio/midi setup (under utilities) says 'output is not supported'.
I just got a 21.5 in. iMac and it's not recognizing my firewire audio interface. I have a 400 to 800 cable from the interface to the iMac and it's simply not picking it up.
Info:
iMac
I've own an apogee duet for that last year, and have had zero problems. I just got the ensemble the other day for recording drums. I followed the install instruction carefully, updated all software, and firmware. And the interface wont show up in my system preferrences (the ensemble and the duet).
I swapped the firewire cables and still nothing shows up. I plugged the ensemble into my friends lab top, and it see's it right away.
So I thought maybe my firewire port isn't working...But when I go to the apple menu, and then "About this Mac" and hit "more info", "system report" under the Hardware tab at firewire... it says the ensemble is plugged in?
I have, since a couple of years ago, used a nice little gadget called Kanex XD. It is simply an HDMI to Mini Display port, which allows me to play Xbox 360 on my iMac 27 ". It has always been clear as a bell!
When I decided to buy the thing, I was not sure if it would work with my current sound system. But it did! I run all the audio from my mac through a firewire audio interface called Focusrite LS 56 (from the audio interface I have Yamaha HS80M, info for geeks like me).
The audio has functioned really well through my Focusrite. But when I updated to the latest OSX (10.7.4), the audio from my Xbox only plays through my internal speakers. Otherwise, the sound works as usual. It's only when I play my Xbox through my Kanex XD, the audio goes through the internal speakers.
I guess it's something that happened in the new update that makes it impossible to play the sound from my Xbox through my audio interface. I contacted the Kanex XD support. They said that there's nothing they can do and that it probably have something to do with the update.
Info:
iMac, Mac OS X (10.7.4)
I can’t record an audio (vocal) track. Here is my gear, DAW: Reason 8, Mac running Yosemite (version 10.10), mixer: Behringer 1204 USB (with built audio interface). I’ve also tried the following stand alone audio interfaces, TASCAM US 100 and M-Audio Fast track Pro. Key board Axiom 25. I gone into preferences and selected USB Audio CODEC for both output and input on the MAC, did the same under reason preference audio tab. when I create a audio track in Reason, in the audio input section I see “No audio input”.
When I select the drop down menu there is a section for Mono input and Stereo for me to check this is followed by a grayed out section that states “No audio input available, please check your sound card settings. The other funny thing is when I use Garage Band, I have no issues recording. I just recorded in garage band using the Behringer 1204. Am I missing some simple setting somewhere,missing a channel routing.
Info:
iMac, OS X Yosemite (10.10)
I successfully installed XP via Bootcamp and my XP audio software Sampitude. I did also install the MOTU traveler using newest drivers. However, it does not comply perfectly. I was installed alright, but when using it, it doesn't work properly. MME seems to work, but doesn't. ASIO doesn't work at all.
Basically it crashes the program, but if you just unplug it, everything works fine again, using the internal audio.
I have an Audiobox USB audiointerface with KRKROKIT5 speakers and must turn up or down the volume on the interface. the Keyboard button wont work.
But my father uses Bose speakers but can do both! However, he does not use an audio interface.
Can I get my imac to do both? And if so, is this a good idea with such good speakers? Is the keyboard just turning it up digitally?
I only ask because it can be annoying reaching up over the speaker to turn the nob instead of just hitting a button on the keyboard.
I'm having trouble getting sound out of Garageband - I've boiled it down to simply trying to play simple Apple loops or use musical typing to play software instruments. Sound is working properly in all other applications, including iTunes, Peak and Final Cut Pro. Audio input/output is set to Built-In in both GB preferences and Audio-Midi preferences. The MIDI is recording (ie, I can see a track appear when I play, and I see levels in the track) but for some reason the audio is not getting down to the mixer below (volume is up all the way on individual track and bottom right main, mute is off). I'm running OS 10.4.8 with Garageband 3.0.2.
View 7 Replies View Relatedjust got happy about the fix for the audio / performance problem of the 09 mac pro's. Why should it be different, the next problem knocks at my door, hallelujah...
When I connect my external audio interface (apogee ensemble) to my mac pro, the mac begins to whistle...
As soon as I turn off my interface again, the whistle is away immediately . The sound is definitively coming from my mac pro and I couldn't locate the problem to a fan. I think it's maybe the firewire controller chip? When I connect my external lacie HD I have no problems at all. I have tried it on both ports on the back side with no success.
The whistle is not constantly on the same noise level. Sometimes it's away for a few seconds, it's high pitched and really annoying though. It does not matter if I playback audio or not. Nothing worked though. I experienced the whistle in the past few months sometimes but it was mostly just for a few minutes or so. But in the past few days it was constantly and it never really stopped. This drives me crazy when I have no audio playing and my room is silent !!
I have no other firewire cable (400 to 800) around to test it. Could this be the culprit also?
I am using iTunes with a Tascam US-122L audio interface. It worked perfectly fine until yesterday evening, and now iTunes absolutely refuses to play any music when the Tascam is connected. I click a song title and the diamond slider does not move, the song stays at 0:00, and the "play" button doesn't change to the "pause" button. It seemed to have started doing this after I exported a song into iTunes from Audio Hijack, which I downloaded to capture some audio from Logic Pro.
I've tried everything, from restarting my computer, to reinstalling the Tascam drivers to reinstalling iTunes.
iTunes works just fine except for the "playing songs" part, which is it's major selling point. It works perfectly fine when the Tascam isn't connected.
I've heard of a lot of people with similar problems but none of the solutions I've seen have worked. Anyone got any ideas?
I plug in an audio input on my mac ibook G4 and go on system preferences which allows me to select my audio input as a source of sound input BUT when i then proceed to go onto Garageband, Garageband detects my audio input on its preferences but will not allow me to select and therefore leaving me unable to record from an audio input.
View 1 Replies View RelatedI hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
I am trying to open this app but keep getting this message.
Info:
GarageBand (Mac) '11, Mac OS X (10.7.4)
sleep the missing keyboard window decided to popped up, not something I'd expect from a laptop! And if you think that's bad, the mouse one appeared right after!!
So I can only guess the damn trackpad packed in resulting to a non-functioning keyboard ; and to verify, the USB device has vanished from the system profiler along with the preference control panel!!! Thankfully Apple had some sense, they didn't wire everything through the trackpad as the blue-tooth and power button still functions
First of all, is the interface for the MBA HDD PATA or ZIF or is it the same thing? I'm looking to get rid of my 80GB HDD and would love to get a 160GB but I'm willing to settle for 120GB.
View 2 Replies View RelatedMost of the results were OK but the "User Interface" one. It got a 13 at 61 refresh/sec.
This computer is a Macbook Pro (Early 2008) C2D 2.6 with 4gb of RAM and the 7200rpm HD, and comparing the results in the xbench site there is clearly something wrong.
The problem is that I don't have a clue of what exactly is "User interface" testing and how to fix it, does anybody know something about this?
I'm having problems with Mail 5.2. I can't seem to get back to widescreen layout in my mac mail. I'm not sure what I did, but is there a way to get the 3-way split screen back? I went into Preferences and tried that, but nothing changes. I've read that once you go back to classic mail, you cannot get the widescreen layout back. Anyway, tried the Letterbox app. as well, is not working on Mail 5.2.
Info:
MacBook Pro, Mac OS X (10.7.2)
I work NOC Support / Operations for a decent sized provider in the midwest-ish area. I configure radios, routers, switches, etc CONSTANTLY. I need an ethernet interface. So I have the ThunderBolt Gig Ethernet adapters.
I plug one in every day, running DHCP, no issues. Then I roll it over to a private IP to setup a radio. At this point, the interface is dropping (because I am rebooting the radio over and over), and I have to change the IP on it consistently. After making four to six changes, the interface just stops responding. In the network prefs, its red, as if it doesn't have a good working connection. I open the network anaylizer, and it shows me that the interface is up, with no IP.
I've disabled the interface by turning it off, nothing. I have unplugged the adapter and the cable, network anaylizer still shows the port up and negotiated at 100/1000, but theres nothing there...
if anyone has written anything to make it work with other Macs yet? Anyone figure out what restricts it from working with other machines? I would love to replace the beast of an external drive I have with this beautiful piece of work. I don't use the external a lot but enough I want one around. At the same time anyone figure out how to make the GUI interface of remote disk work with other machines? I know there is way to remote disk anything and have done it before but the GUI they added to this service is beatiful for the MBA. I would love to be able to use either of these things with out the MBA.
View 8 Replies View RelatedI have a MacBook Pro (just got it this year) and I need a portable external hard drive. I also want to use it on my PC. Which interface would you suggest? I am not sure which connections my PC has but I know it has USB 3.0. Is there an interface on my MacBook that's faster than USB 3.0? If so, I might forget about connecting it to my PC, assuming it's significantly faster.
Info:
MacBookPro, Mac OS X (10.7.3)
