I have been trying to use an audio interface unit, Lexicon Omega, with my macbook on garageband and have not been able to.
According to Lexicon, I should be able to connect the hardware and it will pop up in my audio devices...but this hasn't happened.
On a possibly related note, my audio/midi setup (under utilities) says 'output is not supported'.
When I'm at home, I usually use an E-MU 0404 USB audio interface to channel sounds from my MBP. The problem is that every time I turn on the interface, the sound is distorted and corrupt. It is not a problem with the hardware; my monitors and interface work properly. The only workaround is to restart the computer with the interface connected and on, which clears up the sound. However, this is very inconvenient to do every time and I think that it's most likely due to a sound driver issue.
Information:
2.66 15" unibody MBP,
10.6.1
I'm looking for a good quality Audio Interface for my iMac, i work with MIDI only so i won't be needing tons of ins & outs for vocals, mics, live instruments etc, the only thing I'll be needing to connect is a Digital Piano (MIDI ports) and a pair of Monitor Speakers. what are the best AI brands out there for a iMac ?
View 3 Replies View RelatedAnyone have a good recommendation for a USB audio interface for the 11" MBA?
I have some nice headphones and would prefer to get some decent D/A conversion in as small a package as possible.
did anyone ever got a chance to work with Saffire LE on XP using bootcamp? I searched all over the place, found some patches and solutions, but nothing works Just ridiculous.
View 4 Replies View RelatedI bought a new MacBook yesterday, downloaded Logic 9 and installed the USB drivers for my Saffire 6 USB audio interface but cannot locate it in either the system preferences or the Logic 9 audio preferences. How do I get this working ?
Info:
MacBook Pro (13-inch Late 2011)
I've recently purchased a spanking new macbook pro and am keen to lay some tracks down in garageband. I need a cheap but good quality audio interface so's I get get my guitar riffs onto the mac.
View 18 Replies View Relatedis anyone using their MBPs internal audio interface to convert and record audio into ProTools, Logic, or Record...?
if so how does it sound?
I just got a 21.5 in. iMac and it's not recognizing my firewire audio interface. I have a 400 to 800 cable from the interface to the iMac and it's simply not picking it up.
Info:
iMac
I've own an apogee duet for that last year, and have had zero problems. I just got the ensemble the other day for recording drums. I followed the install instruction carefully, updated all software, and firmware. And the interface wont show up in my system preferrences (the ensemble and the duet).
I swapped the firewire cables and still nothing shows up. I plugged the ensemble into my friends lab top, and it see's it right away.
So I thought maybe my firewire port isn't working...But when I go to the apple menu, and then "About this Mac" and hit "more info", "system report" under the Hardware tab at firewire... it says the ensemble is plugged in?
I have, since a couple of years ago, used a nice little gadget called Kanex XD. It is simply an HDMI to Mini Display port, which allows me to play Xbox 360 on my iMac 27 ". It has always been clear as a bell!
When I decided to buy the thing, I was not sure if it would work with my current sound system. But it did! I run all the audio from my mac through a firewire audio interface called Focusrite LS 56 (from the audio interface I have Yamaha HS80M, info for geeks like me).
The audio has functioned really well through my Focusrite. But when I updated to the latest OSX (10.7.4), the audio from my Xbox only plays through my internal speakers. Otherwise, the sound works as usual. It's only when I play my Xbox through my Kanex XD, the audio goes through the internal speakers.
I guess it's something that happened in the new update that makes it impossible to play the sound from my Xbox through my audio interface. I contacted the Kanex XD support. They said that there's nothing they can do and that it probably have something to do with the update.
Info:
iMac, Mac OS X (10.7.4)
I can’t record an audio (vocal) track. Here is my gear, DAW: Reason 8, Mac running Yosemite (version 10.10), mixer: Behringer 1204 USB (with built audio interface). I’ve also tried the following stand alone audio interfaces, TASCAM US 100 and M-Audio Fast track Pro. Key board Axiom 25. I gone into preferences and selected USB Audio CODEC for both output and input on the MAC, did the same under reason preference audio tab. when I create a audio track in Reason, in the audio input section I see “No audio input”.
When I select the drop down menu there is a section for Mono input and Stereo for me to check this is followed by a grayed out section that states “No audio input available, please check your sound card settings. The other funny thing is when I use Garage Band, I have no issues recording. I just recorded in garage band using the Behringer 1204. Am I missing some simple setting somewhere,missing a channel routing.
Info:
iMac, OS X Yosemite (10.10)
I'm wondering if I somehow have a bad firewire chip in my MBP. It hasn't been able to work with firewire audio interfaces.
- I tried a Metric Halo ULN 2 which loses sync with it's audio. It will be fine for a few minutes with itunes but then becomes distorted and ringy as if it's lost it's audio sync.
- Random kernel panics while using Logic 9, Garageband 11 with an Apogee Duet - all software fully updated. One time it froze while not doing anything - logic was simply open and sitting there. Using iTunes through the Duet seems fine.
- Pops and crackles using Presonus Firestudio.
I've tried wiping my software and reinstalling everything. I'm using a MBP 5,3 2.8Ghz Core 2 Duo 4GB RAM, Snow Leopard (10.6.5) with the latest updates. I'm going to try an Apogee One which is USB, but I'd really like to use a firewire interface. If there's something wrong with my firewire port, I'd like it taken care of. My machine is under applecare 3 year warranty. I don't think this is an easy thing to prove though.
I successfully installed XP via Bootcamp and my XP audio software Sampitude. I did also install the MOTU traveler using newest drivers. However, it does not comply perfectly. I was installed alright, but when using it, it doesn't work properly. MME seems to work, but doesn't. ASIO doesn't work at all.
Basically it crashes the program, but if you just unplug it, everything works fine again, using the internal audio.
I have an Audiobox USB audiointerface with KRKROKIT5 speakers and must turn up or down the volume on the interface. the Keyboard button wont work.
But my father uses Bose speakers but can do both! However, he does not use an audio interface.
Can I get my imac to do both? And if so, is this a good idea with such good speakers? Is the keyboard just turning it up digitally?
I only ask because it can be annoying reaching up over the speaker to turn the nob instead of just hitting a button on the keyboard.
just got happy about the fix for the audio / performance problem of the 09 mac pro's. Why should it be different, the next problem knocks at my door, hallelujah...
When I connect my external audio interface (apogee ensemble) to my mac pro, the mac begins to whistle...
As soon as I turn off my interface again, the whistle is away immediately . The sound is definitively coming from my mac pro and I couldn't locate the problem to a fan. I think it's maybe the firewire controller chip? When I connect my external lacie HD I have no problems at all. I have tried it on both ports on the back side with no success.
The whistle is not constantly on the same noise level. Sometimes it's away for a few seconds, it's high pitched and really annoying though. It does not matter if I playback audio or not. Nothing worked though. I experienced the whistle in the past few months sometimes but it was mostly just for a few minutes or so. But in the past few days it was constantly and it never really stopped. This drives me crazy when I have no audio playing and my room is silent !!
I have no other firewire cable (400 to 800) around to test it. Could this be the culprit also?
I am using iTunes with a Tascam US-122L audio interface. It worked perfectly fine until yesterday evening, and now iTunes absolutely refuses to play any music when the Tascam is connected. I click a song title and the diamond slider does not move, the song stays at 0:00, and the "play" button doesn't change to the "pause" button. It seemed to have started doing this after I exported a song into iTunes from Audio Hijack, which I downloaded to capture some audio from Logic Pro.
I've tried everything, from restarting my computer, to reinstalling the Tascam drivers to reinstalling iTunes.
iTunes works just fine except for the "playing songs" part, which is it's major selling point. It works perfectly fine when the Tascam isn't connected.
I've heard of a lot of people with similar problems but none of the solutions I've seen have worked. Anyone got any ideas?
Today I connected my Mackie Onyx Satellite Firewire audio interface to my 2.4 Ghz 13" Macbook Pro for the first time. After it had been running for a while, I looked at iStat Pro, and it reported a CPU temperature of 67C, which is about 15 to 25 degrees hotter than this machine usually idles. Now I've looked around a little bit and found that it's a known issue and associated with the Agere Firewire chipsets. Is there any solution for this? Does it make a difference if you use a daisy chain setup with an external hard drive in between the computer and the audio interface, or a repeater cable, or anything of that nature?
View 24 Replies View RelatedI hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
Tech Specs :
Mac OSX Mavericks Version 10.9.3
Processor: 2.5 GHz Intel Core i5
I am trying to rip my Audio CD's onto my Mac, but I am not able to do that. These CD's were burnt by me when I had the OSX 10.8 Mountain Lion. But when I insert these CD's into my Mac now, they say that it's a blank CD. I'd read an article on Cnet.com that you cannot read the CD's which were burnt in an older OS when you insert the CD when you upgraded to a new OS. They said that you can also try repeatedly inserting and ejecting the CD's.
Info:
iMac (21.5-inch Mid 2011), OS X Mavericks (10.9.3), Processor: 2.5 GHz Intel Core i5
I own a PowerMac G5 but for my anniversary my girlfriend got me a G4 Cube because she knew how much I loved 'em. I just found out that you need USB speakers.
1. (Even though I don't have speakers) When I put an audio cd in the CUBE.. it recognizes it, but when I hit the play button on iTunes, the swirling beach-ball will just sit there. What's up with that?
2. Can I upgrade the processor and boost the memory up to 1GB?
G4 Cube
450 MHz
512MB Memory
100 HDD
I enjoy books on CD. I have attempted multiple times to listen to Random House Audio CDs on the Macbook, but they are not recognized and the CD is ejected. Is there software that I need to download?
Info:
MacBook (13-inch), iOS 5
My Early 2009 aluminum macbook does not recognize headphones. when i plug in, noise continues to play through the speakers. When I sleep and wake it, the headphones are recognized. I am not sure about the other way around, but this is getting to be supremely annoying.
View 7 Replies View RelatedI have searched the forums and also the internet to find out how to uninstall the HUD interface mod. I have this mod on a few things. I would like to uninstall this mod, but really just don't know how?
View 1 Replies View RelatedLet's say I have my computer connected via Ethernet and WiFi at the same time. Is there any way to see which connection is the one that's actually being used, short of installing iftop?
View 4 Replies View RelatedI am a new iMac owner and am dealing with a big lack of Mac software knowledge. From what I have pieced together ShapeShifter is what I am looking for, but it doesnt work on 10.5. Need to customize my iMac?
View 4 Replies View RelatedI subscribed for a year to MobileMe. I like the benefits of it, but the online interface is possibly the worst I have ever used. Is there any way to use a basic HTML form instead of the current one? What are some alternatives?
View 3 Replies View RelatedI want to know if it's possible to play on my xbox by the osx interface. Actually, I plugged it with my vga MS cable but my samsung SyncMaster 2443bw did not show me right the 1920 by 1080 (1080p). The image hidded the side because the image are oversized by a full screen zooming. So, Can I plug with my x360 on my Mac Pro to have a 1080p. I tried the elgato hybrid but there is only a rca plug & s-video so no Full HD.
View 7 Replies View RelatedLooking for a web based interface with Mac. A Go To My Mac if you will. I was wondering if anyone knows of one or how to jury rig mac OS X into doing this? (the best solution I came up with was to share on my mac using VNC software and then GOTOMY PC to the windows machine.
View 2 Replies View RelatedI'm using 2 network interfaces. One wifi, which is fast, and one ethernet, which is my internal connection. I want to download and browse with the wifi one, and stream and sometimes browse through the ethernet one. How can I tell apps to use either wifi or ethernet?
View 6 Replies View Related