OS X Yosemite :: Mac Not Recognizing Mixer / Audio Interface
Nov 30, 2014
I can’t record an audio (vocal) track. Here is my gear, DAW: Reason 8, Mac running Yosemite (version 10.10), mixer: Behringer 1204 USB (with built audio interface). I’ve also tried the following stand alone audio interfaces, TASCAM US 100 and M-Audio Fast track Pro. Key board Axiom 25. I gone into preferences and selected USB Audio CODEC for both output and input on the MAC, did the same under reason preference audio tab. when I create a audio track in Reason, in the audio input section I see “No audio input”.
When I select the drop down menu there is a section for Mono input and Stereo for me to check this is followed by a grayed out section that states “No audio input available, please check your sound card settings. The other funny thing is when I use Garage Band, I have no issues recording. I just recorded in garage band using the Behringer 1204. Am I missing some simple setting somewhere,missing a channel routing.
Info:
iMac, OS X Yosemite (10.10)
View 1 Replies
ADVERTISEMENT
May 5, 2012
I bought a new MacBook yesterday, downloaded Logic 9 and installed the USB drivers for my Saffire 6 USB audio interface but cannot locate it in either the system preferences or the Logic 9 audio preferences. How do I get this working ?
Info:
MacBook Pro (13-inch Late 2011)
View 2 Replies
View Related
Mar 14, 2012
I just got a 21.5 in. iMac and it's not recognizing my firewire audio interface. I have a 400 to 800 cable from the interface to the iMac and it's simply not picking it up.
Info:
iMac
View 3 Replies
View Related
Jan 20, 2009
audio mixer for the Mac Pro? I primarily use the Mac Pro as my Final Cut Editing system (as well as listening to music), so it would be great to finally get balanced audio. I just got a pair of KRK speakers, which can accept XLR, TRS, and RCA.recommended mixers that can work directly with Final Cut Pro?Here are a couple that I have been curious about...(posted in an earlier thread I started)
View 24 Replies
View Related
May 31, 2009
I just purchased a Behringer Eurorack UBB1002 from a friend and i'm looking to use it with my new MacBook Pro to do some recording. I'm eventually going to be investing in ProTools but I wanted to make sure that the mixer I have will be recognized by my Mac and
View 3 Replies
View Related
Jan 25, 2007
I'm having trouble getting sound out of Garageband - I've boiled it down to simply trying to play simple Apple loops or use musical typing to play software instruments. Sound is working properly in all other applications, including iTunes, Peak and Final Cut Pro. Audio input/output is set to Built-In in both GB preferences and Audio-Midi preferences. The MIDI is recording (ie, I can see a track appear when I play, and I see levels in the track) but for some reason the audio is not getting down to the mixer below (volume is up all the way on individual track and bottom right main, mute is off). I'm running OS 10.4.8 with Garageband 3.0.2.
View 7 Replies
View Related
Oct 2, 2009
When I'm at home, I usually use an E-MU 0404 USB audio interface to channel sounds from my MBP. The problem is that every time I turn on the interface, the sound is distorted and corrupt. It is not a problem with the hardware; my monitors and interface work properly. The only workaround is to restart the computer with the interface connected and on, which clears up the sound. However, this is very inconvenient to do every time and I think that it's most likely due to a sound driver issue.
Information:
2.66 15" unibody MBP,
10.6.1
View 1 Replies
View Related
Sep 9, 2009
I'm looking for a good quality Audio Interface for my iMac, i work with MIDI only so i won't be needing tons of ins & outs for vocals, mics, live instruments etc, the only thing I'll be needing to connect is a Digital Piano (MIDI ports) and a pair of Monitor Speakers. what are the best AI brands out there for a iMac ?
View 3 Replies
View Related
Nov 4, 2010
Anyone have a good recommendation for a USB audio interface for the 11" MBA?
I have some nice headphones and would prefer to get some decent D/A conversion in as small a package as possible.
View 5 Replies
View Related
Aug 11, 2009
did anyone ever got a chance to work with Saffire LE on XP using bootcamp? I searched all over the place, found some patches and solutions, but nothing works Just ridiculous.
View 4 Replies
View Related
Jan 16, 2009
I have been trying to use an audio interface unit, Lexicon Omega, with my macbook on garageband and have not been able to.
According to Lexicon, I should be able to connect the hardware and it will pop up in my audio devices...but this hasn't happened.
On a possibly related note, my audio/midi setup (under utilities) says 'output is not supported'.
View 2 Replies
View Related
Jul 23, 2009
I've recently purchased a spanking new macbook pro and am keen to lay some tracks down in garageband. I need a cheap but good quality audio interface so's I get get my guitar riffs onto the mac.
View 18 Replies
View Related
Jun 23, 2010
is anyone using their MBPs internal audio interface to convert and record audio into ProTools, Logic, or Record...?
if so how does it sound?
View 5 Replies
View Related
May 23, 2012
I've own an apogee duet for that last year, and have had zero problems. I just got the ensemble the other day for recording drums. I followed the install instruction carefully, updated all software, and firmware. And the interface wont show up in my system preferrences (the ensemble and the duet).
I swapped the firewire cables and still nothing shows up. I plugged the ensemble into my friends lab top, and it see's it right away.
So I thought maybe my firewire port isn't working...But when I go to the apple menu, and then "About this Mac" and hit "more info", "system report" under the Hardware tab at firewire... it says the ensemble is plugged in?
View 1 Replies
View Related
Jun 7, 2012
I have, since a couple of years ago, used a nice little gadget called Kanex XD. It is simply an HDMI to Mini Display port, which allows me to play Xbox 360 on my iMac 27 ". It has always been clear as a bell!
When I decided to buy the thing, I was not sure if it would work with my current sound system. But it did! I run all the audio from my mac through a firewire audio interface called Focusrite LS 56 (from the audio interface I have Yamaha HS80M, info for geeks like me).
The audio has functioned really well through my Focusrite. But when I updated to the latest OSX (10.7.4), the audio from my Xbox only plays through my internal speakers. Otherwise, the sound works as usual. It's only when I play my Xbox through my Kanex XD, the audio goes through the internal speakers.
I guess it's something that happened in the new update that makes it impossible to play the sound from my Xbox through my audio interface. I contacted the Kanex XD support. They said that there's nothing they can do and that it probably have something to do with the update.
Info:
iMac, Mac OS X (10.7.4)
View 6 Replies
View Related
Dec 1, 2014
Since upgrading to Mac OS X Yosemite, when I open Time Machine on a folder, I can't navigate backwards in time anymore, on any folder. The arrows are grayed out. Usually, this is because Time Machine needs a bit of time to load older backups, but I have given it a few minutes to load and it still does not work.
Strangely enough, the only time that there is no problem is when I restart my Mac. Once I restart, then I open a folder and open Time Machine, then I can navigate backwards in time, almost immediately, too. But after that, no folder that I open in Time Machine in the future will allow me to move back in time, until I restart once again, then I am able to only navigate a single folder.
Things I have already tried:
- Repair Disk Permissions on Macintosh HD
- Repair Disk on Time Machine drive.
Info:
Mac mini (Late 2012), OS X Mountain Lion (10.8.4), 2.3 GHz i7, 16 GB RAM, 256 GB SSD
View 8 Replies
View Related
Dec 28, 2010
I'm wondering if I somehow have a bad firewire chip in my MBP. It hasn't been able to work with firewire audio interfaces.
- I tried a Metric Halo ULN 2 which loses sync with it's audio. It will be fine for a few minutes with itunes but then becomes distorted and ringy as if it's lost it's audio sync.
- Random kernel panics while using Logic 9, Garageband 11 with an Apogee Duet - all software fully updated. One time it froze while not doing anything - logic was simply open and sitting there. Using iTunes through the Duet seems fine.
- Pops and crackles using Presonus Firestudio.
I've tried wiping my software and reinstalling everything. I'm using a MBP 5,3 2.8Ghz Core 2 Duo 4GB RAM, Snow Leopard (10.6.5) with the latest updates. I'm going to try an Apogee One which is USB, but I'd really like to use a firewire interface. If there's something wrong with my firewire port, I'd like it taken care of. My machine is under applecare 3 year warranty. I don't think this is an easy thing to prove though.
View 1 Replies
View Related
Dec 13, 2006
I successfully installed XP via Bootcamp and my XP audio software Sampitude. I did also install the MOTU traveler using newest drivers. However, it does not comply perfectly. I was installed alright, but when using it, it doesn't work properly. MME seems to work, but doesn't. ASIO doesn't work at all.
Basically it crashes the program, but if you just unplug it, everything works fine again, using the internal audio.
View 5 Replies
View Related
Aug 19, 2010
I have an Audiobox USB audiointerface with KRKROKIT5 speakers and must turn up or down the volume on the interface. the Keyboard button wont work.
But my father uses Bose speakers but can do both! However, he does not use an audio interface.
Can I get my imac to do both? And if so, is this a good idea with such good speakers? Is the keyboard just turning it up digitally?
I only ask because it can be annoying reaching up over the speaker to turn the nob instead of just hitting a button on the keyboard.
View 3 Replies
View Related
Dec 2, 2014
Problem started after updating to Yosemite. I am running 10.10.1. I can find all my backups, going back to 2010 in fact, when browsing my external FW800 hard drive directly in the Finder. But if I click the menubar icon and choose "Enter Time Machine," I can see some recent backups for some folders, but I cannot access some older backups that I know are there on that same drive. The window title bars in the TM interface are totally grayed out for those older backups. But again, there are all on the same FW800 external HD, and I can search them just fine and extract the files just fine using the Finder.
Is the Time Machine interface totally broken in Yosemite?
Clearly there is nothing wrong with my external FW800 HD, otherwise I wouldn't be able to manually browse and extract files via the Finder. And yes, it makes regular TM backups every day too. It's only the "Enter Time Machine" UI that is partly broken. I say "partly" because some backups (very recent) display, but I cannot access all the backups. It's very strange.
Info:
iMac, OS X Yosemite (10.10), March 2009 DuoCore, 8GB RAM, 1TB HD
View 14 Replies
View Related
Jan 6, 2011
just got happy about the fix for the audio / performance problem of the 09 mac pro's. Why should it be different, the next problem knocks at my door, hallelujah...
When I connect my external audio interface (apogee ensemble) to my mac pro, the mac begins to whistle...
As soon as I turn off my interface again, the whistle is away immediately . The sound is definitively coming from my mac pro and I couldn't locate the problem to a fan. I think it's maybe the firewire controller chip? When I connect my external lacie HD I have no problems at all. I have tried it on both ports on the back side with no success.
The whistle is not constantly on the same noise level. Sometimes it's away for a few seconds, it's high pitched and really annoying though. It does not matter if I playback audio or not. Nothing worked though. I experienced the whistle in the past few months sometimes but it was mostly just for a few minutes or so. But in the past few days it was constantly and it never really stopped. This drives me crazy when I have no audio playing and my room is silent !!
I have no other firewire cable (400 to 800) around to test it. Could this be the culprit also?
View 24 Replies
View Related
Jun 24, 2009
I am using iTunes with a Tascam US-122L audio interface. It worked perfectly fine until yesterday evening, and now iTunes absolutely refuses to play any music when the Tascam is connected. I click a song title and the diamond slider does not move, the song stays at 0:00, and the "play" button doesn't change to the "pause" button. It seemed to have started doing this after I exported a song into iTunes from Audio Hijack, which I downloaded to capture some audio from Logic Pro.
I've tried everything, from restarting my computer, to reinstalling the Tascam drivers to reinstalling iTunes.
iTunes works just fine except for the "playing songs" part, which is it's major selling point. It works perfectly fine when the Tascam isn't connected.
I've heard of a lot of people with similar problems but none of the solutions I've seen have worked. Anyone got any ideas?
View 4 Replies
View Related
May 12, 2010
Today I connected my Mackie Onyx Satellite Firewire audio interface to my 2.4 Ghz 13" Macbook Pro for the first time. After it had been running for a while, I looked at iStat Pro, and it reported a CPU temperature of 67C, which is about 15 to 25 degrees hotter than this machine usually idles. Now I've looked around a little bit and found that it's a known issue and associated with the Agere Firewire chipsets. Is there any solution for this? Does it make a difference if you use a daisy chain setup with an external hard drive in between the computer and the audio interface, or a repeater cable, or anything of that nature?
View 24 Replies
View Related
Apr 14, 2004
I hope I'm not double posting. Have any of the other new iMac owners experienced weird frequencies coming from external speakers that are connected to their iMacs?
For example: I have a set of studio monitors that are hooked up to my iMac using a firewire audio interface. Whenever I'm copying data I get an extremely high-pitched frequency coming from my speakers that sounds like my hard drive spinning. Also, whenever I'm scrolling or moving the magic mouse I get a loud buzzing coming from the speakers (especially when scrolling). None of this stuff happened with my previous 20" iMac C2D. I have experienced this issue with all three of the 27" iMacs that I have gone through thus far (due to the yellow tint issue). Does this sound like something I'm just going to have to live with. All of these high pitched frequencies are driving me batty!
View 10 Replies
View Related
Dec 13, 2010
I have a presonus firebox and want to use it on my mac pro when I'm running windows XP, but windows doesnt seem to recognize it. I downloaded drivers, followed the instructions to disconnect and reconnect the device, looked through control panel, etc....
Presonus says that sometimes they dont like bootcamp, but I dont understand why that would be. Anything I can do to try and get it working?
View 1 Replies
View Related
Dec 11, 2014
I have upgraded to Yosemite from lion now mac wont recognize any usb drives?
View 1 Replies
View Related
May 9, 2012
I thought simply plugging my mixer via USB cable into my MacBook Pro would start a sequence to allow me to record. Using Audacity, it says that a problem occurs when I try to record.I would first just like to make certain the mixer sound is connecting with the laptop. The unit didn't come with any driver.
Info:MacBookPro, Mac OS X (10.7.3)
View 2 Replies
View Related
Dec 7, 2006
I'm going to be djaying some events for my church and want to use my Powerbook to play the music through a sound system. I'll be running it to a mixer first and then to 2 monitors. What will I need to configure on my Powerbook to do this? Or will I be able to just hook up the cables and play music from iTunes? I will be looking at the actual mixer this coming Sunday to see what type of cables I'll need.
View 2 Replies
View Related
Dec 2, 2014
After I wake the Mac from sleep, the audio volume from my external speakers is very low and the keyboard volume controls do not work. The volume is low and cannot be adjusted. After a restart everything works correctly -- until the Mac goes to sleep again.
Computer: Mac Pro - late 2013 - 6,1
System: OS X Yosemite (10.10.1)
Speakers: Bose Companion 2 Series II (plugged into audio output of my Mac Pro).
Info:
Mac Pro (Late 2013), OS X Yosemite (10.10.1), Thunderbolt Monitor
View 6 Replies
View Related
Dec 11, 2014
I'm talking about iTunes, YouTube, Facebook videos.. you name it, it isn't working. I can't load any videos or play any music. Nor can I hear any audio on things that were pre-loaded before the problem started. And it just happened out of the blue maybe an hour ago! I've tried reinstalling iTunes, my Shockwave player, my QuickTime player to no avail.
And just to be clear, I did check to see if my speakers were muted or not (they were/are not) and if my audio output's were funky (they don't seem to be). I'm about to restart my computer and see what happens then.
Info:
MacBook Pro, OS X Yosemite (10.10)
View 1 Replies
View Related
