MacBook Pro :: 3TB Drive Only Shows Up On It As 750GB?
Apr 9, 2012
I have a new Western Digital 3TB drive that I am using as an external drive in a NexStar Hard Drive Dock to connect to my computer. I formatted it in Disk Utility but it only shows up as 746.5 GB and not the full 3TB. I formatted it through Guid Partition but the info says there is 0 partition. I don't actually need a partition, I am trying to use it as backup and copy about 2.5TB of files onto it.I have a Macbook Pro and am running Mac OS 10.5.8?
Info:
MacBook Pro 5,1, Mac OS X (10.5.8)
View 6 Replies
ADVERTISEMENT
Jul 19, 2010
I have a White MacBook version 3,1 made in 2008 w/ the intel ICH8-M AHCI SATA controller. Unfortunately this controller is only 1.5gb/sec. I picked up a WD7500BPVT, WD Scorpio Blue 750gb, with a spec of 3gb/sec. Western Digital tech support assured me it would step down to 1.5gb/sec, no jumpers needed (as it isn't configurable by a hardware jumper). So I install it in my MacBook, boot up from the Snow Leopard install disc but it doesn't see my fancy, schmancy 750gb drive. Is the drive not seen because of a compatibility issue w/ the SATA controller? If so, what is the largest capacity 9.5mm drive someone has installed in a MacBook w/ the intel ICH8-M AHCI SATA controller?
View 2 Replies
View Related
Aug 7, 2009
The press release info implies that the 750GB version uses 333GB/platter technology, but they don't come right out and say it. They seem to be referring mainly to the 1TB version.
Assuming they are using the larger platters, do they simply block off the excess capacity? Does this mean the 750GB might actually be faster on average, assuming they disable the slowest blocks?I really want to put one of these in my 17" MBPRo, but I'd hate to find out later that the 750GB version is actually using "old tech" 250Gb platters.
View 4 Replies
View Related
Jul 21, 2010
Just to give anybody who doesn't know a heads up. The 750gb passport se drive is too tall for a macbook. At least my model (3,1).
Can anybody point me in the direction of another good external drive that is 750 or bigger that will fit?
Also carbon copier reformatted the drive for the mac. How do I change it back and reset it to factory settings?
View 5 Replies
View Related
Jun 15, 2012
So I just got a Toshiba Canvio 3.0 750 gb and I have a late 2011 Macbook Pro 15 inch running lion. When I plug it in the light apears in the hard drive, but it doesn't show up in finder or disk utility, so I can't use it or reformat it.
Info:
MacBook
Pro, Mac OS X (10.7.2)
View 1 Replies
View Related
Oct 13, 2009
I have a 2009 MB Pro CTO 500GB looking to upgrade it to 750GB, I have heard that Western Digital Makes a 750GB drive 5400 that will work, part #WDG WD7500KEVT, has anyone heard about this or had experience or know of another drive that will work.
View 1 Replies
View Related
Oct 19, 2009
I bought a new WD 750GB Scorpio Blue and popped it into a 2009 MBP 15". Everything went fine on the hardware side, but when it came time to install the OS on the new drive everything went downhill. Leopard said it couldn't install because something was wrong with the drive. Snow Leopard just never gets past "30 minutes" remaining. I'm not sure what I'm doing wrong, but I'm guessing I have a bad HDD unless I'm somehow missing a step. Both versions of Leopard can see the HDD and can partition it and say that it's OK when I have them check it. I never had much trouble installing Windows, but for some reason installing OSX is eluding me. Any thoughts besides just sending the drive back? I've already disconnected and reconnected it without any improvement.
View 4 Replies
View Related
Mar 24, 2012
Can I upgrade hard-disk 750GB 7000rpm and Memory 8Gb?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 17, 2010
looking to purchase this hd and use it inside my macbook bc i can get an amazing deal on it vs buying the WD blue 750gb..will this work or is it setup like the new passport essentials are where the micro-usb port is part of the hard drive?
View 1 Replies
View Related
Apr 22, 2012
I installed a Momentus XT 750 (ST750LX003-1AC154 firmware SM12) into my MacBook Pro (late 2009). I then did a full clean install of OSX 10.7 and updated to 10.7.3. Lately I have been getting odd hangs of applications and eventually the OS, finally I have to hard-power it down and reboot.
No SMART errors reported, PRAM and SMC have been reset. I am on the latest firmware and EFI for this particular MacBook Pro. I do not think that this drive is spinning down if idle.
As far as I know there is not a firmware update for the XT 750 drive and I am on SM12.
What else can I try to get this machine stable? This is a 750GB hybrid SSD drive and I read about lots of issues with SSD and hybrid-SSD drives in previous generation MacBook Pros, particularly with Lion.
Info:
MacBook Pro, Mac OS X (10.7.3), seagate momentus XT 750GB
View 13 Replies
View Related
Jun 18, 2012
Can I upgrade the HDD in the 2012 13" MBP to 750GB 7200 rpm to improve performance?
View 5 Replies
View Related
Jun 22, 2010
When I start my macbook If I don't hold the options key it goes straight to an apple than circle with line through it. If I hold options key I get two hard drives one that says just hard drive one that says windows. Windows seems to work fine other than the missing drivers for the Ethernet, wireless airport, and a few others. I have tried everything. I for some reason cannot get to the mac side. It doesn't even show up and nothing relating to bootcamp shows up. I split the partitions 35G to windows the rest to "mac" side. I would be just as happy with installing the drivers if I could get them installed I know very little about Mac's and should have left well enough alone.
View 2 Replies
View Related
Jun 8, 2012
So I bought a 2tb external drive to save space on my main drive - I copied all my movies and have been dropping a bunch of mini dv tapes onto it - but when I open the drive none of them show up
When I get info in disk utility I get one that shows I have avaialble 1.99TB of 2 TB - and right below it says 890 MB are used - don't get it
Tried the disk utility and it says they are working fine .... repair did not seem to do anything
Info:
iMac, Mac OS X (10.6.8)
View 8 Replies
View Related
Jun 24, 2012
I have just purchased a MacBook pro. When I put a blank DVD into my MacBook, a blank disk was shown on the desktop. On the MacBook Pro I get a File DVD.fpbf which when I try to burn a disc shows error code 0x80020063. How can I go back to the blank disc display?
Info:
MacBook, Mac OS X (10.6.8)
View 2 Replies
View Related
Aug 21, 2014
My MacBook Pro 13", running on latest update, is showing a completely blue, plain blue, desktop background. It changed all by itself. When I tried to reset it by right clicking on the image I want on my desktop and selecting "Set Desktop Picture" nothing changes. When I go into my settings and try to change it that way, the image I want as my background shows as already being my background, yet my desktop is still blue. Tried rebooting already.
Info:
MacBook Pro (13-inch Early 2011), iOS 7.1.2
View 1 Replies
View Related
Apr 24, 2012
I and several people are reporting that the Seagate Momentus XT 750GB does not spinning down at idle under MacOS Lion. Do any of you have this drive and have similar problems? This is a notebook hard drive and I have it in my MacBook Pro (late 2009), but others report this in other models, like the late 2011 and mid 2010 MacBook Pros. The drive will only spin down when I force the laptop to sleep by choosing Sleep under the Apple menu or closing the lid. However it does not spin down under normal use, nor does it seem to let the laptop go to sleep.
Info:
MacBook Pro, Mac OS X (10.7.3), seagate momentus XT 750GB
View 14 Replies
View Related
Feb 11, 2012
So I've just purchased a mid 2011 Macbook Pro 13" used via eBay. Was advertised as having 500gb hard drive and 6gb ram. I checked the ram and it was all legit, checked the hd capacity and it was all correct as well. So I made a new login for myself and deleted the previous owner's. Now my hard drive shows up as 320gb. Even in disk utility and terminal.
View 2 Replies
View Related
Mar 7, 2009
I just installed a new Samsung Lightscribe drive from OWC and now neither my Super Drive nor the new drive shows up. When I check my Sys Profile under Disc Burning this is what is showing up. No burning device was found. If you are using an external device please make sure that it is connected and powered properly.
View 4 Replies
View Related
Aug 14, 2010
I have a Intel Dual-Core Intel Xeon. I boot from FW drives all the time. A client came in with their OS on a WD My Book Studio LX. I plug in via FW 800, but holding the option key on boot does not display the clients FW/OS drive. I can go into startup disk, select their drive from there, but when the computer restarts I get to the grey Apple screen and it just stays there spinning and then the Mac restarts itself.
One strange addition; when I boot to my good OS, their drive shows up with an internal drive icon as opposed to the regular FW icon. they brought their new 8-core system off their bus and we are able to boot off that computer from the FW drive no problem.
View 4 Replies
View Related
Sep 6, 2014
I have 3 macs, Macbook Pro, iMac 27" and iMac 20". The drive shows up on the Macbook Pro and the 27" but when I plug it into any of the USB ports on the 20" I get nothing. Nothing in the disk utility, nothing on the desktop and nothing in finder. I have already tried PRAM and SMC resets with no change in status.
iMac 20" - 10.9.4
iMac 27" - 10.9.4
MacBook Pro - 10.6.8
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
View 1 Replies
View Related
Feb 22, 2010
Where did the other gigs go? Is it possible someone installed a hidden disk partition and this accts for the missing 3 gigs? What can I do to locate the hidden disk partition? I have formatted the drive multiple times yet the gigs remain unaccounted. How does one go about doing a hard reboot? Do I need to change the rpms of the drive and the reformat
View 8 Replies
View Related
Jan 8, 2011
Is it possible to put a password on a flash drive/eternal drive? I know many companies sell drives that have encryption software built in, but is it possible to just simply password protect. So basically it asks for a password before it shows the content of the drive?
View 6 Replies
View Related
Jun 14, 2012
I'm using a 500GB WD external hard drive to store a lot of data. It's been working fine, plugged into a USB hub. Suddenly, today, the drive stopped appearing when I plugged it in. I've tried plugging it in directly to the computer, it doesn't help. In system profiler, the USB port shows up as : Vendor Specific Device. The ID is confirmed as being from Initio, so I was rather dismayed. Upon trying the drive with another computer, same thing. The drive just shows up as an Initio device, not my external drive. I've rebooted and changed cables many times.
MBP 2010, Core2Duo.
OSX 10.6.8
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Feb 25, 2008
I uninstalled boot camp, by restoring the drive using the BootCamp Assistant. Well... when I turn my computer on, and hold down option, it still gives 2 drives named "Windows" as a choice to boot to, even though they "don't exist." This really scared me when it tried to boot to one of those automatically after a restart, and it said that it could not load the operating system.
View 5 Replies
View Related
Jan 16, 2009
I have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
View 2 Replies
View Related
Jan 3, 2010
I've done a byte to byte clone of my original 320GB bootcamp drive to a 750GB drive (connected via USB). So I remove the 320GB from bay 4 (MacPro) and slot in the 750GB into bay 4. I fire up my MacPro hit the Option key during power up and all I get is an option to select my Mac drive not my new 750GB Windows drive.
So I boot into OSX (since I have no other option) and I can see my "Untitled" Windows drive on my desktop. I can select it and browse it and I see all my Windows files. Also, under System Preferences - Startup Disk, I can see my "Windows on Untitled" listed.
View 14 Replies
View Related
Apr 4, 2012
My itunes is eating up available disk space, and there are some TV shows I seldom watch. Can I store them on an auxiliary drive? Can I delete them on my MacBook and get them back from the cloud?
Info:
MacBook Air (13-inch Late 2010)
View 2 Replies
View Related
Sep 8, 2009
I have two 1.5TB HDs, RAID 0, as my itunes library. I use Time Machine to back up all my drive, but I also wanted to clone the RAID but only use a single drive as the clone. Will this cause any potential problems since its going from a 2 drive RAID to a single drive.
View 6 Replies
View Related
Oct 7, 2009
Uhh hard to fit the title, but in System Profiler - Sata device tree, normally you see <hard drive name> and underneath it <partition 1 (IE Macintosh HD)>, however since installing my SSD, everything shows <SSD NAME> and then the SSD partition but also shows hard drive partitions there?
View 5 Replies
View Related
Dec 26, 2009
I have 2 Ibooks: one has OSX and the other is on the highest version of the old OS9. Something odd happened the other day with a new USB flash drive I started using. I was transfering files (word docs) onto a flash drive. When I inserted the flash drive in the old iBook, each file (and document) showed the date Dec 9, even though the docs were from Dec. 16. When I inserted the flash drive in the newer iBook, it showed the correct dates for each doc. I tried this back and forth, and found the same thing. Yet, all the dates are correct on everything on my hard drive on the old iBook. It only is a problem with this new flash drive I'm using. It never happened before.
View 1 Replies
View Related
