MacBook Pro :: 13" Won't Recognize SSD In OptiBay
Sep 15, 2010
I'm using a Corsair 120 GB Force SSD, a MCE OptiBay Kit, and a Hitachi 500 GB 7200 rpm drive. Everything works great when the SSD is in the hard drive bay, and the Hitachi is in the OptiBay. I'd prefer to swap the arrangement so the Hitachi can be protected by the sudden motion sensor, but when the SSD is in the OptiBay OS X won't recognize it. I've tried booting from the install disc to use Disk Utility, but it only shows the Hitachi drive as if the SSD isn't in the machine. I've throughly checked the installation; it appears correct, and as I said everything works fine with the drives swapped. I've also tried resetting the PRAM and the SMC, per the instructions in Apple's KB.
View 6 Replies
ADVERTISEMENT
Dec 7, 2010
I recently upgraded my stock HDD to a SSD and moved the HDD into the optibay. I was hoping that using the command pmset -a disksleep 1 would mean the 5400rpm drive would go to sleep after 1 minute of inactivity and I would get nice SSD silence It usually does but something is making it spin up again all the time. I am hardly running anything on my MBP.
View 5 Replies
View Related
Aug 16, 2010
I think this has been discussed but can't find it. In a SSD+HDD setup, should I put the SSD in the primary bay or in the optibay (replacing the superdrive). I believe there is a setup that has issues with sleep or motion sensor whatever, but I can't recall what the preferred setup is.
View 8 Replies
View Related
Oct 4, 2010
I am looking for optibay recommendations for my MBP 17" mid-2010. I am not sure which one to get. MCE offers one, which I have looked at, but they are pretty pricy at almost 100 bucks. Then I saw another website, [URL] selling optical bay caddies for almost half that (~50 dollar range); and lastly even some on eBay for the 12$ range from US sellers.
View 7 Replies
View Related
Dec 23, 2010
In need of a good video guide so i can get my optibay installed! I ordered the one from SMK something on ebay as per recommendations on searching this forum.
View 3 Replies
View Related
Dec 30, 2010
I have an SSD in place of the usual hard disk my MBP 13" came with to which i placed in the optibay. Since i did this (yesterday) ive noticed how noisy the drive is over just using the SSD alone.
Is there a way to either powerdown the optibay drive or 'eject' it when not in use for silence and prolonged battery life? Would you recommend it? Most of the time i will just use it as a netbook unless i download media to the optibay.
View 1 Replies
View Related
Apr 3, 2009
This is the future home of the optibay thorough guide.
First of, your here to add a second SSD/HDD to your notebook computer.
This article will cover your many issues / install problems / choices to me made:
1.1 - What laptop have
1.2 - What options do i have
1.3 - Installation and Setup
1.4 - RAID Arrays & Possible Issues
1.5 - Bootcamp !
View 24 Replies
View Related
Sep 29, 2009
Just got an optibay
[URL]
I had a problem with the computer not mounting the disc.
But solved this by swapping the locations. ie put the old hard drive in the optibay holder into the superdrive. Put the new one in the native bay.
I copied my entire system onto the new disc in the native bay, and am booting from that as its faster.
Its a 320gig 7200rpm disc.
The old drive in the optibay/superdrive bay is 120gig 3200rpm.
Still having troubles like:
occasional system freeze. Wake from sleep very slow. Sometimes 10 secs or more. Sometimes need to push power button.
The MacBook Pro is 2.26ghz 4gigs ram, only 1 or 2 gigs of my files on it. Up to date software (snow leopard 10.6.1).
MCE has virtually no tech support. Still waiting for a reply about why my disc didn't mount a week later (even though I already solved that).
Any ideas on why the bad performance?
Do you think the different speed drives is messing things up?
View 5 Replies
View Related
Dec 30, 2009
i've got an optibay installed in my uMBP for about 3 months now. In the optibay I have a 60 GB SSD, from which i boot. My other harddrive contains my OS X home folder & a bootcamp partition. I really love my setup, it's perfect for my, until I saw a buddy in my class boot his MBP: after he pressed the button, it took about 2 sec to show the apple logo. He doesn't have a SSD, and the exact same machine, and yet me manages to boot faster then me. (We also both have 10.6). I searched about this problem, and the only thing i could find was to make sure that your OS X partition is set as boot drive. Here is a screenshot of my boot drive menu: I found it strange that my bootcamp doesn't show up there. I always boot in bootcamp holding the alt key, not using this preference pane. Here is a video of my macbook booting: [URL] I found this ting called rEFIt?
View 13 Replies
View Related
Jun 20, 2010
Do we have any controls that will tell the drive to sleep when it can? it seems like the second HDD is always spinning.
I already set the options in "energy saver" to sleep when possible, but the drives still spin even when I am not using them.
View 4 Replies
View Related
Jul 14, 2010
Spent hours searching on MRoogle etc, couldn't find anything helpful, wondering if anyone else is having this problem.
I recently installed an Optibay in my new 2010 i5 2.4 MBP using Lifehacker's guide, which can be found here:
[URL]
I have an 80GB Intel X-25 SSD in the main hard drive slot, and a 500 GB Seagate Momentus XT in the Optibay. The OS and applications are installed on the SSD in the main slot, while my home folder and some Pro Tools session files are located on the Momentus XT connected via Optibay in the optical drive slot.
View 5 Replies
View Related
Jan 3, 2011
I installed a second HD in my Macbook Pro via Optibay.1st drive is SSD and second "normal" HD for data.When I boot I get a strange loop with the apple logo appearing and disappearing. It looks like my Mac does not know which of the two drives to choose for booting. Only when I press the options button before booting do I get the Bootcamp selector for Mac or Win which are both on the SSD.
As I use the second drive only for data, I want to make the SSD drive the "primary boot drive" without me having to press the option button on startup every time.
View 2 Replies
View Related
Mar 26, 2010
I am looking to do the optibay or DIY version, but what I want is a ssd for the boot drive, how big of one do I really need? Do all of the applications need to be on the boot drive as well or can some of them run off the secondary drive, which will be the 1TB WD Scorpio?
View 24 Replies
View Related
Apr 26, 2010
I've got an SSD in the HDD space, and a newmodeus HDD bay in the optical drive (same thing as the optibay). So what I was thinking was to install windows in a partition on the 500gb HDD. My SSD is only 80GB so I wanted to save space on that. Here is what I have tried:
Macbook set up with SDD and HDD, no optical drive.
Bootcamp will not let me install windows using an ISO image, needs a CD to install.
So I put my HDD in the HDD bay and put the optical drive back in. I then started up the macbook using a firewire drive (HDD has no OS on it, only the SDD does). Bootcamp then tells me it can't partition an external disk and I have to boot up using an internal disk (even though I WANT to partition the internal disk... bootcamp wouldnt let me get to that option running off a firewire drive). It seems like the only thing left is to just install windows on an SSD partition.
View 2 Replies
View Related
Apr 28, 2010
What are you guys using them for? I'm thinking strongly about going this route and using one for streaming my multi-sample library and audio files into Logic Pro and as an interim quick-bounce-while-composing drive before I dump the project file to an external drive.
Anybody using the Intel X-25M G2 (160GB, currently using for apps, OS,m and a most-used samples) with an OCZ Vertex 120GB? That would be more than enough internal storage for me as I make use of my external HDD via ExpressCard->eSATA all the time.
View 3 Replies
View Related
Aug 3, 2010
I just did the whole SSD/optibay upgrade, and now i have a question about booting from the SSD.I used CCC to clone my HD to the new SSD. After it was cloned, I installed the drives into my macbook pro, placing the SSD in the original HD bay, and the old HD into the optibay. When i turned on my computer, i think my laptop was still booting from the old HD. How do i set things so that i boot from the new SSD? I plan to use the old HD for music/movies/documents. I tried a search but didn't come across anything.
View 5 Replies
View Related
Aug 17, 2010
Couldn't find the answer on Mroogle.1. Removed optical drive from 2007 MacBook Pro2. Installed Optibay alternative in MacBook Pro3. Installed 320 GB HDD in "Optibay"4. Attempted to watch a VIDEO_TS folder with DVD Player5. Upon dragging folder to DVD Player icon this message appears:There was an initialization error
A valid DVD drive could not be found [-70012]6. Attempted to load with VLC, no luck. 7. Videos are located on HDD in "Optibay", FYI.I've found a little program that apparently switches the optical drive DVD player looks for to an external one, which I posses, but I don't want to have to unhook my USB dvd drive from its happy little resting place at my desk, just to watch a movie on my TV, sitting in bed, at a friends' house or on a plane or something.
View 4 Replies
View Related
Apr 1, 2010
I'm curious if you can install windows 7 or any windows for that matter on the hdd installed in the optibay and boot via bootcamp?
Has anyone tried this and if so does it work well?
I decided to keep my 15" mbp as today is the last day for the exchange so I'm going to go ahead and install the optibay and stick my 500gb hitachi drive in there.
View 3 Replies
View Related
Jul 18, 2010
I have a smoothly working MBP2010 with an optibay carrying 500gb HDD and an Intel SSD in the original HDD port.
I also have an USB2.0 DVD-RW.
View 24 Replies
View Related
Jul 30, 2010
Today I received my Optibay-clone and hard drive, and tried to install it. Unfortunately, I messed it up and don't think I can finish the job now. Using driver bits supplied by ifixit, I managed to ruin the screws in step 10 of this guide: [URL] Tight, tiny screws are the bane of my existence. I don't understand what on earth I was supposed to do to remove these particular screws, when all the other screws in the computer didn't pose a problem at all. See awesome attached pics of mutilated screw, and the 10 or so different Phillips screwdrivers, none of which managed to do the job. So, am I completely screwed, or does someone out there have a magnificent suggestion to aid me in my plight?
View 7 Replies
View Related
Nov 29, 2010
How do you stop the optibay from automounting? I already tried modifying the fstab file and its not doing anything unless im messing up the drive name.
View 4 Replies
View Related
Oct 7, 2009
I just installed a 160gb Gen2 Intel in my 15" macbook pro, and its flooring me with its speed. Amazing upgrade. All editors, designers, etc... should do this upgrade.
Optibay Alternative ----
Now I want to put another SSD in there for Raid0 or just the stock 500gb for now.. for storage.. but the cost of the Optibay is pretty high. I saw a link to an alternative, called USCaddy or something, I forgot. Can someone link that one in, and comment if its ok?
Slim Superdrive Enclosure -----
And what are people putting their old superdrives in? I want something slim lined, USB bus powered.. etc... Any comments on one that works really well and looks cool
View 3 Replies
View Related
Jun 21, 2010
I bought an i5 15" MBP last week and instantly through my 80GB SSD into it. I've been doing my best to keep a lot of unnecessary data off the SSD but I'm still running out of space. I'm thinking about throwing the stock 5400rpm 320GB drive into an Optibay tray and using that to hold the data. I use Photoshop and Illustrator quite a bit and I would like to use the 5400rpm drive as the scratch disk as well.
However, I'm not to familiar with read/write processes and I'm wondering if I will see a speed decrease if I use the 5400rpm drive to house the data while leaving the SSD open for the OS and all applications. Should I expect a noticeable decrease in battery life with both hard drives installed as well?
View 14 Replies
View Related
May 15, 2010
I made a mockup of what the MBP 13" would be like if Apple ditched the superdrive, used a bigger battery, and added a dedicated GPU:
(actual) 2010 MBP 13"
(mockup) 2011 MBP 13"
I figure the larger battery would add another 5 hours to the current 10 hour battery life, totaling about 15 hours, although that could change with the addition of the more powerful GPU.
View 14 Replies
View Related
May 19, 2010
think this guide will be useful to anyone looking to install an SSD to accompany a larger capacity drive but is a little unsure how to tackle the cloning/file organization side of things with two drives.
View 1 Replies
View Related
May 21, 2012
I been noticing my MacBook pro getting very slow in games like diablo 3 and Starcraft. This MacBook pro was bought a year ago. It is running i7 sandy bridge with a 128 Ssd. I did install optibay with a monetux xt hard drive in it.It could run ultra setting on Starcraft no problem and is very smooth when I first got it. Lately I got diablo 3, and it gets very slow. I had to change all the graphics setting to low. It is not slow in the beginning, but it gets very slow after a while. It is like slow motion!!! Even when is low, it is still very laggy in game. I tried to repair the disk and clean up the laptop with onyx and still doing the same thing. I even try to reboot when is slow, but same thing after I reboot. I guess the MBP still hot.
View 1 Replies
View Related
Oct 13, 2010
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
View 8 Replies
View Related
Jan 14, 2010
I installed a x25-m, of course, transfering the HDD to the optibay. Here is my problem: Whenever I shutdown, restart or hibernate, I hear, right as the fans shutoff, a loud, almost sharp click. It is obviously the HDD. As many of us know,(that have this set up, or have read the optibay thread) this "hard shutdown" is probably due to the lack of sudden motion sensor for the HDD in the optibay setup. What to do, what to do...especially considering the fact that I boot frequently between Win 7 and OS X. Well, after some research on the interwebs, I have come to the conclusion that ejecting the poor thing prior to shutdown, much like any external device, nets a happy HDD. In the process I came to the conclusion that there should be some automation to this, and sure enough, in terminal, you can augment the volume to not mount on boot. It is a beautifully simple process as noted in this post: [URL] This is all very good news, except that I've only found a solution for OSX. I was expecting to find an equally elegant process in windows. Lo and behold, the process, script and/or command are/is evading me. If anyone out there is on a similar path, could they be so bold as to link their findings? Possibly we could collaborate to right this terrible wrong. To specify, I am hoping to make it so that the drive in question is never "mounted" until chosen to do so, hopefully something similar to the approach in OSX.
View 3 Replies
View Related
Mar 28, 2010
I run SSD/HDD, my HDD in the optibay is broken, I stuck it in a external and it makes finder freeze, it got bumped around too much so I want to put a new one back in the 'correct place' for a spinner, and stick the SSD in the optibay.(I figure the extra 2% of shock protection offered by the orange rubber circle things is worth the trouble of moving everything).
I am also going to buy a WD 3 platter 1TB laptop drive, and I read that they fit fine in the regular spot in MBP's (I'm going to open and measure in a min.)Anyways, there's no BIOS, only EFI, so how to I pick what drive to boot from? with 10.6 is it as simple as holding option down on boot, and picking my 'OSX' HDD, and then it will auto boot from that until I specify otherwise? (I ask because before 10.6 people on here were always talking about how to switch boot drives.)
View 10 Replies
View Related
Oct 19, 2010
I bought an optibay clone and put it in my 2010 Macbook i5. I have an SSD residing in my standard hard drive bay (because of potential hibernate issues) and the 5400rpm Apple drive + optibay clone in the Superdrive bay. How do I sleep/spin down the 5400rpm drive ? Unmounting doesn't seem to help. Put disk to sleep option in preferences is selected, but it keeps spinning and spinning. What options do we have for sleeping/spinning down this drive within OSX ?
View 3 Replies
View Related
