Do we have any controls that will tell the drive to sleep when it can? it seems like the second HDD is always spinning.
I already set the options in "energy saver" to sleep when possible, but the drives still spin even when I am not using them.
I been noticing my MacBook pro getting very slow in games like diablo 3 and Starcraft. This MacBook pro was bought a year ago. It is running i7 sandy bridge with a 128 Ssd. I did install optibay with a monetux xt hard drive in it.It could run ultra setting on Starcraft no problem and is very smooth when I first got it. Lately I got diablo 3, and it gets very slow. I had to change all the graphics setting to low. It is not slow in the beginning, but it gets very slow after a while. It is like slow motion!!! Even when is low, it is still very laggy in game. I tried to repair the disk and clean up the laptop with onyx and still doing the same thing. I even try to reboot when is slow, but same thing after I reboot. I guess the MBP still hot.
View 1 Replies View RelatedI recently upgraded my stock HDD to a SSD and moved the HDD into the optibay. I was hoping that using the command pmset -a disksleep 1 would mean the 5400rpm drive would go to sleep after 1 minute of inactivity and I would get nice SSD silence It usually does but something is making it spin up again all the time. I am hardly running anything on my MBP.
View 5 Replies View RelatedI think this has been discussed but can't find it. In a SSD+HDD setup, should I put the SSD in the primary bay or in the optibay (replacing the superdrive). I believe there is a setup that has issues with sleep or motion sensor whatever, but I can't recall what the preferred setup is.
View 8 Replies View RelatedI'm using a Corsair 120 GB Force SSD, a MCE OptiBay Kit, and a Hitachi 500 GB 7200 rpm drive. Everything works great when the SSD is in the hard drive bay, and the Hitachi is in the OptiBay. I'd prefer to swap the arrangement so the Hitachi can be protected by the sudden motion sensor, but when the SSD is in the OptiBay OS X won't recognize it. I've tried booting from the install disc to use Disk Utility, but it only shows the Hitachi drive as if the SSD isn't in the machine. I've throughly checked the installation; it appears correct, and as I said everything works fine with the drives swapped. I've also tried resetting the PRAM and the SMC, per the instructions in Apple's KB.
View 6 Replies View RelatedI am looking for optibay recommendations for my MBP 17" mid-2010. I am not sure which one to get. MCE offers one, which I have looked at, but they are pretty pricy at almost 100 bucks. Then I saw another website, [URL] selling optical bay caddies for almost half that (~50 dollar range); and lastly even some on eBay for the 12$ range from US sellers.
View 7 Replies View RelatedIn need of a good video guide so i can get my optibay installed! I ordered the one from SMK something on ebay as per recommendations on searching this forum.
View 3 Replies View RelatedI have an SSD in place of the usual hard disk my MBP 13" came with to which i placed in the optibay. Since i did this (yesterday) ive noticed how noisy the drive is over just using the SSD alone.
Is there a way to either powerdown the optibay drive or 'eject' it when not in use for silence and prolonged battery life? Would you recommend it? Most of the time i will just use it as a netbook unless i download media to the optibay.
This is the future home of the optibay thorough guide.
First of, your here to add a second SSD/HDD to your notebook computer.
This article will cover your many issues / install problems / choices to me made:
1.1 - What laptop have
1.2 - What options do i have
1.3 - Installation and Setup
1.4 - RAID Arrays & Possible Issues
1.5 - Bootcamp !
Just got an optibay
[URL]
I had a problem with the computer not mounting the disc.
But solved this by swapping the locations. ie put the old hard drive in the optibay holder into the superdrive. Put the new one in the native bay.
I copied my entire system onto the new disc in the native bay, and am booting from that as its faster.
Its a 320gig 7200rpm disc.
The old drive in the optibay/superdrive bay is 120gig 3200rpm.
Still having troubles like:
occasional system freeze. Wake from sleep very slow. Sometimes 10 secs or more. Sometimes need to push power button.
The MacBook Pro is 2.26ghz 4gigs ram, only 1 or 2 gigs of my files on it. Up to date software (snow leopard 10.6.1).
MCE has virtually no tech support. Still waiting for a reply about why my disc didn't mount a week later (even though I already solved that).
Any ideas on why the bad performance?
Do you think the different speed drives is messing things up?
i've got an optibay installed in my uMBP for about 3 months now. In the optibay I have a 60 GB SSD, from which i boot. My other harddrive contains my OS X home folder & a bootcamp partition. I really love my setup, it's perfect for my, until I saw a buddy in my class boot his MBP: after he pressed the button, it took about 2 sec to show the apple logo. He doesn't have a SSD, and the exact same machine, and yet me manages to boot faster then me. (We also both have 10.6). I searched about this problem, and the only thing i could find was to make sure that your OS X partition is set as boot drive. Here is a screenshot of my boot drive menu: I found it strange that my bootcamp doesn't show up there. I always boot in bootcamp holding the alt key, not using this preference pane. Here is a video of my macbook booting: [URL] I found this ting called rEFIt?
View 13 Replies View RelatedSpent hours searching on MRoogle etc, couldn't find anything helpful, wondering if anyone else is having this problem.
I recently installed an Optibay in my new 2010 i5 2.4 MBP using Lifehacker's guide, which can be found here:
[URL]
I have an 80GB Intel X-25 SSD in the main hard drive slot, and a 500 GB Seagate Momentus XT in the Optibay. The OS and applications are installed on the SSD in the main slot, while my home folder and some Pro Tools session files are located on the Momentus XT connected via Optibay in the optical drive slot.
I installed a second HD in my Macbook Pro via Optibay.1st drive is SSD and second "normal" HD for data.When I boot I get a strange loop with the apple logo appearing and disappearing. It looks like my Mac does not know which of the two drives to choose for booting. Only when I press the options button before booting do I get the Bootcamp selector for Mac or Win which are both on the SSD.
As I use the second drive only for data, I want to make the SSD drive the "primary boot drive" without me having to press the option button on startup every time.
I am looking to do the optibay or DIY version, but what I want is a ssd for the boot drive, how big of one do I really need? Do all of the applications need to be on the boot drive as well or can some of them run off the secondary drive, which will be the 1TB WD Scorpio?
View 24 Replies View RelatedI've got an SSD in the HDD space, and a newmodeus HDD bay in the optical drive (same thing as the optibay). So what I was thinking was to install windows in a partition on the 500gb HDD. My SSD is only 80GB so I wanted to save space on that. Here is what I have tried:
Macbook set up with SDD and HDD, no optical drive.
Bootcamp will not let me install windows using an ISO image, needs a CD to install.
So I put my HDD in the HDD bay and put the optical drive back in. I then started up the macbook using a firewire drive (HDD has no OS on it, only the SDD does). Bootcamp then tells me it can't partition an external disk and I have to boot up using an internal disk (even though I WANT to partition the internal disk... bootcamp wouldnt let me get to that option running off a firewire drive). It seems like the only thing left is to just install windows on an SSD partition.
What are you guys using them for? I'm thinking strongly about going this route and using one for streaming my multi-sample library and audio files into Logic Pro and as an interim quick-bounce-while-composing drive before I dump the project file to an external drive.
Anybody using the Intel X-25M G2 (160GB, currently using for apps, OS,m and a most-used samples) with an OCZ Vertex 120GB? That would be more than enough internal storage for me as I make use of my external HDD via ExpressCard->eSATA all the time.
I just did the whole SSD/optibay upgrade, and now i have a question about booting from the SSD.I used CCC to clone my HD to the new SSD. After it was cloned, I installed the drives into my macbook pro, placing the SSD in the original HD bay, and the old HD into the optibay. When i turned on my computer, i think my laptop was still booting from the old HD. How do i set things so that i boot from the new SSD? I plan to use the old HD for music/movies/documents. I tried a search but didn't come across anything.
View 5 Replies View RelatedCouldn't find the answer on Mroogle.1. Removed optical drive from 2007 MacBook Pro2. Installed Optibay alternative in MacBook Pro3. Installed 320 GB HDD in "Optibay"4. Attempted to watch a VIDEO_TS folder with DVD Player5. Upon dragging folder to DVD Player icon this message appears:There was an initialization error
A valid DVD drive could not be found [-70012]6. Attempted to load with VLC, no luck. 7. Videos are located on HDD in "Optibay", FYI.I've found a little program that apparently switches the optical drive DVD player looks for to an external one, which I posses, but I don't want to have to unhook my USB dvd drive from its happy little resting place at my desk, just to watch a movie on my TV, sitting in bed, at a friends' house or on a plane or something.
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
I'm curious if you can install windows 7 or any windows for that matter on the hdd installed in the optibay and boot via bootcamp?
Has anyone tried this and if so does it work well?
I decided to keep my 15" mbp as today is the last day for the exchange so I'm going to go ahead and install the optibay and stick my 500gb hitachi drive in there.
I have a smoothly working MBP2010 with an optibay carrying 500gb HDD and an Intel SSD in the original HDD port.
I also have an USB2.0 DVD-RW.
Today I received my Optibay-clone and hard drive, and tried to install it. Unfortunately, I messed it up and don't think I can finish the job now. Using driver bits supplied by ifixit, I managed to ruin the screws in step 10 of this guide: [URL] Tight, tiny screws are the bane of my existence. I don't understand what on earth I was supposed to do to remove these particular screws, when all the other screws in the computer didn't pose a problem at all. See awesome attached pics of mutilated screw, and the 10 or so different Phillips screwdrivers, none of which managed to do the job. So, am I completely screwed, or does someone out there have a magnificent suggestion to aid me in my plight?
View 7 Replies View RelatedI had a trojaner-but i deleted everything from the Harddisk-
During the deleted HD the Fann was running too!
Info:
MacBook Pro, Mac OS X (10.4.10)
why is my mackbook air fan running all the time?
View 1 Replies View RelatedHow do you stop the optibay from automounting? I already tried modifying the fstab file and its not doing anything unless im messing up the drive name.
View 4 Replies View RelatedI just installed a 160gb Gen2 Intel in my 15" macbook pro, and its flooring me with its speed. Amazing upgrade. All editors, designers, etc... should do this upgrade.
Optibay Alternative ----
Now I want to put another SSD in there for Raid0 or just the stock 500gb for now.. for storage.. but the cost of the Optibay is pretty high. I saw a link to an alternative, called USCaddy or something, I forgot. Can someone link that one in, and comment if its ok?
Slim Superdrive Enclosure -----
And what are people putting their old superdrives in? I want something slim lined, USB bus powered.. etc... Any comments on one that works really well and looks cool
I bought an i5 15" MBP last week and instantly through my 80GB SSD into it. I've been doing my best to keep a lot of unnecessary data off the SSD but I'm still running out of space. I'm thinking about throwing the stock 5400rpm 320GB drive into an Optibay tray and using that to hold the data. I use Photoshop and Illustrator quite a bit and I would like to use the 5400rpm drive as the scratch disk as well.
However, I'm not to familiar with read/write processes and I'm wondering if I will see a speed decrease if I use the 5400rpm drive to house the data while leaving the SSD open for the OS and all applications. Should I expect a noticeable decrease in battery life with both hard drives installed as well?
Last summer my MBP 2.3 GHz C2D was heating up so much, you barely could touch it. So I decided to give it a little hardware checkup. Finding the fans completely stuffed with dust
But after a while i recognized that the fans went on high rpms (around 6000) already at startup and did not lessen anymore. I do not have any high capacity processes running and the temperatures are not just not warm buth rather chilly, so no need for high fan speed. Now I want to solve this problem as well but seemingly nothing will work.
[code]...
Info:MacBookPro, Mac OS X (10.7.3)
at the sms Fan Controll Tempreture 51, 1999 rpqm-using only Safari- in the activity window CPU 7%-No other Pocesses!!!
Info:
MacBook
Pro, Mac OS X (10.4.10)
Have installed all possible updates and run such Drobo utilities as Time Tamer.
Info:MacBookPro, Mac OS X (10.7.4)
