MacBook Air :: Stays With The Apple Logo On The Screen And Is Processing?
Mar 12, 2012it stays with the apple logo on the screen and is processing, but nothing happens.
Info:
MacBook Air
it stays with the apple logo on the screen and is processing, but nothing happens.
Info:
MacBook Air
my emac wont start i stays on the apple logo with the spinning gear? can anyone tell me how to fix it?
View 3 Replies View RelatedMy ibook g4 when starting up stays on the grey logo screen with the loading circle , but won't do anything further I left it on for two days straight to see if it needed time to load but still nothing ... What do I do !?
Info:
iBook
My MacBook stays at the apple screen.What can I do to fix the problem?
Info:
MacBook
My wife's macbook will turn on, it stays on the gray screen with the apple. After a while it will just shutoff. I have tried removing the battery and holding down the power button for 5secs but did not work. I also reset the pram and also did nothing.
View 1 Replies View Relatedwhy my notebook screen goes blue sometimes and i can't do anything? even turn it off?
Info:
MacBook Pro, Mac OS X (10.7.4)
I noticed today that my apple logo is showing through my screen. Whenever I am on a white background or app, I see it. It is an outline of a backwards apple logo. There is a disk around it. It is located in the sampe place as my external logo.
Info:
MacBook Pro (13-inch Late 2011)
Mac book pro grey screen apple logo
Info:MacBook Pro (13-inch Early 2011), iOS 5.1.1, Mac book pro opening with grscreen
Today i discover that when my macbook pro screen is black and i place light behind the screen, i can see through apple logo. Is it normal ?
Info:
MacBook Pro, OS X Mavericks (10.9.4), Iphone 5s
I replaced my cracked LCD screen on my 17" macbook pro, and upon firing up you hear the chime, and the apple logo comes up just fine. Then after that it goes to horizontal lines, and no image on it. If I plug in an external, it shows up just fine on it, and if I put in the original cracked screen, I can see my desktop and everything as well.
View 16 Replies View RelatedHave you also noticed, that the apple logo can be seen on the screen if the lid is open during sleep/turned off, just a faint silouette. Normal?
View 4 Replies View RelatedMy Mac book pro is not starting , it's just showing the white screen with apple logo
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
Macbook: A1181 Core 2 Duo 2.0ghz 1GB RAM
DVD disk: Leopard 10.5 Retail install
Hard drive: dead (spins with clicks).
With regular startup I get the flashing question mark and can hear the failed hard drive click and spin. After getting the DVD to boot in the drive (it doesn't suck it in right away), I get an apple logo and pinwheel like I should, but after about 30 seconds it goes to a black (blank) screen and the DVD spins down, but not all the way. The computer is still on, but nothing happens.
Oddities:
<>If I start it with an iMac 10.4 DVD I can boot to the install screen just fine, but can't install because it's an iMac DVD. I can erase and partition the drive fine (not the dead one, another one I have).
<>Safe mode boot does the same thing, but takes 20 times as long to boot
<>Retail OSX 10.4 DVD does not boot at all, but that one might be for PowerPC computers. I get the flashing question mark folder.
My MacBook Pro will not boot up any more. It just suddenly happened. It turns on and comes up to the gray screen with the apple logo and then the circle progress icon comes up and spins.
View 1 Replies View Relatedi tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
My 13" macbook is stuck on the grey opening screen with the apple logo and progress circle.
Info:
MacBook
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I Have a MacBook pro 17" 2009 with OS 10.7 Lion, I was doing the updates in the middle of the updates give a error and say you need to restart, Now, when I restarted it is showing gray screen with apple logo and spinning gear and is not moving beyond that (even after 3 hours).I tried Resetting my mac PRAM and NVRAM, nothing, I tried Safe Mode, I tried verbose mode(command V) and is show me this,The system bootstrapper has crached: Trace/BPT trap: 5. I don't have originals cd I lose them when I move.and Lion I'm download from app store I don't Have DVD I don't care about information on my mac, I backup everything daily. I just want to make it work again.
Info:
MacBook Pro, Mac OS X (10.7.3), 17" 2009
My macbook is driving me insane now. Just recently, my macbook has occasionally flickering screen and freezes after that. Yesterday, when I was watching youtube on fullscreen, it first has flickering screen, then freezes. So I hard booted it pressing the power button. Then, when I try to restart it, it won't boot pass the apple logo no matter what. Here's my macbook spec2007 Summer Macbook Pro 15"Snow Leopard 10.6 OS XI cracked my screen once, and got a replacement, don't know if that matters.
I've tried the following:Safe mood reboot, the progress bar goes about half, then disappears and stalls again.Booted in verbose mode but it gives a warning message: 'com.apple.driver. internal modem support declares no kernel dependencies; using com.apple.kernal.6.0'. Booted in Single user mood, and typed fsck for disk repair. After checking said the volume Macintosh HD appears to be ok. But still won't boot pass the apple logo after restart.Boot with installation disk pressing C at startup.
Success after a few try: Opened Disk Utility and did disk repair (no problem found). Reinstalled Snow Leopard OS X 10.6. This time it booted with Finder and everything for a short while, then the screen flicker and freezes again (before I can backup anything!). Then, I can't reboot pass the apple logo again. When I try to reinstall Leopard OS X 10.5 with installation disk, the macbook seems to try to read the disk, but won't boot. I've got a CD stuck in the optical drive now.
Info:
MacBook Pro, Mac OS X (10.6.7), Bought 2007
when i start up my macbook it goes the the gray screen with apple logo then the logo turns in to a circle with a line in it
Info:
MacBook
There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?
Info:
MacBook Pro, Mac OS X (10.7.4)
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart. Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. I already tried the Command-Option-P-R keys trick like five times.
Info:
MacBook Pro
I was installing the Mac OS X Snow Leopard (family pack), haven't installed yet, due to a moving from USA to Brazil. I put the CD on and followed the instructions of installation. After is ready to install, a message showed that would take about 1 hour and 45 minutes. So I left the room and when I came back the screen was bright with an "apple" on it, and its frozen, and I can't take the CD from the slot or do anything in the computer. What that means, did my laptop crashed? I did turn the power off and turn back on, but still the same.
Info:
Mac OS X (10.5.8)
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
How do I reset or reboot a first version of MacBook Air? It crashed when I tried to restart it and now just shows white screen with Apple Logo ?
Info:
MacBook Air, iOS 5
I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."
I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View Related