MacBook :: Black Screen After Apple Logo Boot From OS X Leopard DVD

Dec 3, 2010

Macbook: A1181 Core 2 Duo 2.0ghz 1GB RAM

DVD disk: Leopard 10.5 Retail install

Hard drive: dead (spins with clicks).

With regular startup I get the flashing question mark and can hear the failed hard drive click and spin. After getting the DVD to boot in the drive (it doesn't suck it in right away), I get an apple logo and pinwheel like I should, but after about 30 seconds it goes to a black (blank) screen and the DVD spins down, but not all the way. The computer is still on, but nothing happens.

Oddities:

<>If I start it with an iMac 10.4 DVD I can boot to the install screen just fine, but can't install because it's an iMac DVD. I can erase and partition the drive fine (not the dead one, another one I have).

<>Safe mode boot does the same thing, but takes 20 times as long to boot

<>Retail OSX 10.4 DVD does not boot at all, but that one might be for PowerPC computers. I get the flashing question mark folder.

View 2 Replies


ADVERTISEMENT

OS X :: Can't Boot From Leopard Install - Gray Screen Without Apple Logo?

Oct 20, 2009

So, today I tried to install windows through boot camp assistant on my mac. When it got to partitioning my drive I got an error that my hard drive needed repairing. So I opened up disk utility and clicked verify disk (I can't click repair) and got this error Disk Utility stopped verifying �Chris Hard Drive� because the following error was encountered: Filesystem verify or repair failed. I then researched this and learned to fix the problem I must boot from my leopard install disk and use the DU from their. Unfortunately I don't have access to the disk. But I have the install disk from my old macbook (the white one) so I used this. I put in the disk and shut down. When I turn it on I hold C but all I get is a grey screen but with out the apple logo. When I try turning it out holding alt I don't get the option of the CD just Chris Hard Drive. But when I boot up holding D i do get to the hardware test screen but I get the error that's something like "Hardware test does not support this hardware". Will the Leopard install of a different type of macbook not work on my new macbook pro (13" aluminium)?

View 1 Replies View Related

MacBook Pro :: Screen Is Black And See Through Apple Logo

Aug 24, 2014

Today i discover that when my macbook pro screen is black and i place light behind the screen, i can see through apple logo. Is it normal ?

Info:
MacBook Pro, OS X Mavericks (10.9.4), Iphone 5s

View 2 Replies View Related

PowerPC :: Load Up The Blue Screen With The Apple Logo, But Then The Screen Goes Black Or Flickers?

Feb 4, 2008

I am looking at purchasing an Ibook G4 but the description of the item includes this:"When you switch it on it begins to load up i.e. the blue screen with the Apple logo, but then the screen goes black or flickers. Said friend has kindly wiped the hard drive for me so now when you switch it on it makes the �opening� noise then you get a blue screen with alternating �?� and the Finder logo."

I have a feeling this may have been a temporary fault with the screen connector being loose and possibly damaged.But i assume the alternating "?" and the "finder logo" is simply a lack of OS?

View 1 Replies View Related

Windows :: Normal Grey Screen Appears With No Apple Logo, Then It Goes To Black Screen?

Mar 17, 2009

I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).

View 14 Replies View Related

Software :: MacBook Pro Won't Boot / Grey Screen With The Apple Logo?

Jul 11, 2009

My MacBook Pro will not boot up any more. It just suddenly happened. It turns on and comes up to the gray screen with the apple logo and then the circle progress icon comes up and spins.

View 1 Replies View Related

MacBook Pro :: Flickering Screen And Freezes - Won't Boot Pass Apple Logo

May 5, 2012

My macbook is driving me insane now. Just recently, my macbook has occasionally flickering screen and freezes after that. Yesterday, when I was watching youtube on fullscreen, it first has flickering screen, then freezes. So I hard booted it pressing the power button. Then, when I try to restart it, it won't boot pass the apple logo no matter what. Here's my macbook spec2007 Summer Macbook Pro 15"Snow Leopard 10.6 OS XI cracked my screen once, and got a replacement, don't know if that matters.

I've tried the following:Safe mood reboot, the progress bar goes about half, then disappears and stalls again.Booted in verbose mode but it gives a warning message: 'com.apple.driver. internal modem support declares no kernel dependencies; using com.apple.kernal.6.0'. Booted in Single user mood, and typed fsck for disk repair. After checking said the volume Macintosh HD appears to be ok. But still won't boot pass the apple logo after restart.Boot with installation disk pressing C at startup.

Success after a few try: Opened Disk Utility and did disk repair (no problem found). Reinstalled Snow Leopard OS X 10.6. This time it booted with Finder and everything for a short while, then the screen flicker and freezes again (before I can backup anything!). Then, I can't reboot pass the apple logo again. When I try to reinstall Leopard OS X 10.5 with installation disk, the macbook seems to try to read the disk, but won't boot. I've got a CD stuck in the optical drive now.

Info:
MacBook Pro, Mac OS X (10.6.7), Bought 2007

View 5 Replies View Related

MacBook :: Won't Boot Past Gray Screen With Apple Logo And Then Shuts Off

May 29, 2012

This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart. Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. I already tried the Command-Option-P-R keys trick like five times.

Info:
MacBook Pro

View 4 Replies View Related

MacBook :: (2008) Won't Boot / Work - Stuck On Gray Apple Logo Screen

Jul 25, 2010

For several weeks, my black MacBook (2008) has been acting odd. Certain applications won't open, and when I attempt to open them, the computer makes a quiet clicking noise, like the drive is failing. Last week, when trying to boot it, the thing just wouldn't. Stuck on the grey Apple logo screen. Assuming a hard drive problem or failure, I ran the tests. I ran Disk Utility from the Snow Leopard install disk, checked & repaired permissions, checked & repaired disk. All okay. I ran the Apple Hardware Test from the install disk that came with the computer, using the test that runs for an hour or so, and all appears to be fine. The computer won't boot into safe mode. I've tried flashing the PRAM. I doubt I could achieve much through target disk mode, as I've already run Disk Utility. What's left to do? Something doesn't add up here.

View 1 Replies View Related

IMac (Intel) :: Screen Goes To Normal Gray With Apple Logo And Spinner Then Goes Black

Jun 5, 2014

Upon start up my screen goes to normal gray w/apple logo and spinner then goes black. Cursor is visible and still is moveable but nothing else. I safe booted and bar came up also but then back to black screen. 

Info:
iMac, Mavericks upgrade

View 1 Replies View Related

MacBook Pro :: System Hangs At Apple Logo Boot Screen / RAM Not Allowing System To Boot

Jan 5, 2011

I've been reading this site for a while now, first time I'm posting. I recently purchased 8 GB of RAM for my 2010 13" MBP. There are two 4 GB DDR3 PC3-10500 1333mhz sticks. When I install them in the laptop my computer does not get past the apple logo boot screen (the spinning disc freezes). However, I can boot into Windows (boot camp) without issues.

Also, when I pair either of the 4 GB sticks with one of my old 2 GB stock sticks the laptop boots up fine in OS X. The system profiler registers it as 6 GB of 1067 mhz RAM (the stock sticks are 1067 mhz)

View 7 Replies View Related

Power Mac G5 :: Won't Boot Past Apple Logo Screen?

Nov 23, 2007

I'm trying to repair a Powermac G5 (dual 2.0, the first model I believe, with a new Radeon 9800 graphics card) that won't boot and I'm having some problems that I can't seem to diagnose.

The machine will boot to the openfirmware prompt or target disc mode and will show the 'OS not found' icon if left to boot from the HD (which has been wiped). If I try to boot from either the included restore disc or a retail 10.4 DVD I've tried it will show the boot screen with the Apple logo on it but no spinning status indicator underneath. It just freezes on that screen. Once it showed the status indicator but it just continued to spin for about 30 mins, at which point I gave up. Same issue if I try to boot the hardware test (except it freezes on the hardware test loading icon rather than the Apple icon). The superdrive appears to work as it is accessible in target disc mode.

I've reset the SMU and reset the PRAM via the keyboard shortcut. The one thing that leads me to think it's a firmware fault is that when I run the 'reset-nvram' command it gives an OK, but when I then run 'reset-all' it freezes rather than rebooting. Any ideas anyone?

Information:
Powermac G5 Dual 2GHz

View 19 Replies View Related

OS X :: IMac Won't Boot And Stuck On The Apple Logo Screen?

Jan 14, 2011

I have Time Capsule and everything is backed up on there. My data is on a separate USB HD + Drobo, but for now I need my iMac to boot but it won't. It won't even get into the Desktop. all the guides online says double click the Install Icon this and that...I would if I can get into the Desktop !

It is just stuck on the Apple Logo screen with the spinny thing, that stops spinning!

View 2 Replies View Related

OS X :: Apple Logo Not Appearing At Grey Boot Screen?

Jan 25, 2010

Sometimes, when I turn on my iMac (10.6.2), the system will not load, you can see the grey screen but empty, no apple logo there. I have to force a shutdown pressing the power button and when I turn it on for the second time it will work properly.

It only happens once in a while but I cannot understand why, since nothing changes.

PS.- I have verified my disk with the disk utility and everything seems fine.

View 4 Replies View Related

OS X :: IMac Won't Boot - Apple Logo And Lingering Grey Screen

Oct 30, 2008

I had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").

I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.

I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!

View 24 Replies View Related

OS X :: Snow Leopard Hangs On Boot At Apple Logo?

Oct 11, 2009

After recently doing a fresh install of Snow Leopard, it was working great for about a week, and now it hangs at boot and flashes the Apple Logo, a NO sign, and a folder sign. I booted in verboose mode and it say that it could not load drivers.

I had this problem before and I used Leopard's (10.5) Archive and Install feature to fix it.

Where is this located on SL (10.6) ? I DO NOT want to loose my data

View 1 Replies View Related

MacBook Pro :: Screen With Apple Logo Is Frozen During Installation Of OSX Snow Leopard?

Jun 5, 2012

I was installing the Mac OS X Snow Leopard (family pack), haven't installed yet, due to a moving from USA to Brazil. I put the CD on and followed the instructions of installation. After is ready to install, a message showed that would take about 1 hour and 45 minutes. So I left the room and when I came back the screen was bright with an "apple" on it, and its frozen, and I can't take the CD from the slot or do anything in the computer. What that means, did my laptop crashed? I did turn the power off and turn back on, but still the same.

Info:
Mac OS X (10.5.8)

View 1 Replies View Related

OS X :: Unable To Boot System / Grey Screen With Apple Logo At Startup

Jan 12, 2011

I own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.

Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.

I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:

1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now

This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.

What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).

View 1 Replies View Related

OS X Yosemite :: During Boot It Shows A Gray Screen With Apple Logo And A Progress Bar

Dec 6, 2014

During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?

Info:
iPad 2, iOS 7.0.3, 64 Ghz. 3G

View 2 Replies View Related

Mac Mini :: The Black Strip Around The Edges Just Above The Black Apple Logo?

Oct 18, 2008

Do any of you have a sensor-type looking thing on your iMac's? It's on the black strip around the edges just above the black Apple Logo.See my picture for what it looks like (you'll have to look closely to see it):I'm interested to see your responses of what it could be/is. I've only had the machine for going on for 3 days now so I'm new to the whole iMac thing.

View 4 Replies View Related

OS X :: MacBook Air Gets To Apple Logo, Turns Black?

Feb 19, 2009

Disk Utility in OS X gave me a Invalid key length after checking Catalog file, so I restarted to OS X Install DVD. It did the same thing on the OS X Install DVD. I went to Startup Disk, changed it back to the Mac OS X on Macintosh HD option - so I could go in and back my stuff up. It just goes to apple logo, does the spin thing at the bottom, and goes black. I can't even boot from DVD anymore.

View 1 Replies View Related

OS X V10.6 Snow Leopard :: Gray Screen With Apple Logo Display For 10 Mins Then MBA Shutdown

Apr 4, 2012

My computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. Sometimes it refuses to shut down. This issues started after installing OS lion. What do I do?

Info:
MacBook Air, Mac OS X (10.7.3)

View 4 Replies View Related

IMac (Intel) :: Screen Is White With No Spiral And Apple Logo - Snow Leopard OS X 10.6.8

Dec 11, 2014

Why is my  Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on?  There is no spiral and no Apple logo and the desktop does not appear.  The screen is just white.  

Prior to this, we had a wind storm in our area with some power glitches today.  After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.   I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it.  Now what should I do?

Info:
iMac, Mac OS X (10.6.8)

View 1 Replies View Related

OS X :: Mac Mini Won't Boot / Getting Gray Screen With The Gray Apple Logo

May 8, 2007

Unfortunately I bumped the switch on the power strip that my Mac Mini (1.42ghz G4, OS X 10.3) is plugged into while it was running. Now it won't boot up. All I get is the gray screen with the gray apple logo and the spinning wheel but no OSX.

View 14 Replies View Related

MacBook :: Won't Boot - Stuck On Apple Logo

Mar 25, 2009

So this morning i turned on my alu macbook (2.0ghz, 2gb ram) and i'm stuck on the apple logo and spinny thing at the bottom, i've searched here and the apple site but can't find a solution.

View 24 Replies View Related

MacBook Pro :: Stuck At Apple Logo (no CD Boot Either)

Jan 22, 2010

I have a major problem with my first Generation MacBook Pro. It won't boot anymore: it just turns on and gets stuck at the Apple logo. There is no spinning wheel and nothing else happens. Pressing 'C' for booting from CD or pressing ALT and choosing the CD as an alternative boot source does not work either: it just does exactly the same, gets stuck at the apple logo. I already tried resetting the PRAM and NVRAM, as well as the SMC. This also did not change anything. CMD+V mode starts up then stops at the line "ACPI: System State [S0 S3 S4 S5] (S3)"

What can I do? I really need to save my Mac, there is some really important stuff on there

View 12 Replies View Related

MacBook Pro :: Does Not Boot And Stuck On The Apple Logo

Apr 27, 2012

It is getting stuck on the Apple Logo in white page with spinning gear. The apple logo keep disappearing and come again endlessly.

Info:
MacBook Pro, Mac OS X (10.0.x), Actually I only know it is OS X.

View 14 Replies View Related

MacBook Pro :: Will Not Boot Up Stops At Apple Logo?

Aug 20, 2014

My daughter's 3 year old MacBook Pro will not boot up. The grey screen with Apple logo comes up and it looks and sounds like it is going to boot up but after 30 seconds it goes black and turns off. 

Info:
MacBook Pro (15-inch Early 2011), iOS 5.0.1

View 6 Replies View Related

Intel Mac :: Boot Partition Error Message - Mid 2010 I7 Will Not Boot Past The Apple Logo

Apr 8, 2012

My mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok.  

Info:
iMac, Mac OS X (10.7.3)

View 7 Replies View Related

MacBook :: Apple Logo Takes A While To Show Up During Boot Up

Dec 12, 2010

I noticed that when I restarted my MacBook today, the Apple logo takes a while (20-30 seconds) to just show up before the spinning gear shows up.

Things I've tried

1. Repair disk permissions

2. Verify disk

3. Reset PRAM

4. Boot into Safe Mode

5. Make sure Mac OS X 10.6.5 is the startup disk

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved