My ibook g4 when starting up stays on the grey logo screen with the loading circle , but won't do anything further I left it on for two days straight to see if it needed time to load but still nothing ... What do I do !?
Info:
iBook
before I went to bed, I was playing the Sims 2, when my iBook G4 crashed. Our power cord can be a bit dodgy, so sometimes that happens. I didn't really think about it much, just closed the laptop and went to sleep.Last Monday morning, I opened it and pressed the power button. It began turning on, and got as far as the grey screen with the apple and the spinning circle. And then it just froze. The circle stopped turning.
I freaked out a bit, and restarted it a bunch of times, each time with the same result. (One time it stopped spinning, and then told me a restart was required. Huh. The rest of the times the exact same thing happened though.) I even tried unplugging and removing the battery, but it made no difference. So eventually I just shut it and decided to try again later.Last Tuesday I opened it and pressed the power button without much hope, and again the apple and circle came up just fine, then stopped, but then a bunch of words and numbers popped up.I'm a complete computer noob, but they don't look good to me... or are they good?
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/REEASE_PPC
I have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)Â
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.Â
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.Â
when i start up my macbook it goes the the gray screen with apple logo then the logo turns in to a circle with a line in it
Info:
MacBook
it stays with the apple logo on the screen and is processing, but nothing happens.Â
Info:
MacBook Air
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
My Macbook Pro is not starting past the grey screen and the apple logo and the rolling circle. I have tried every method and I am desperate to do anything to start my computer even erase the entire disc. I have contacted the Apple store and they told me the cost will be equivalent to $600 to just repair it and no way I will be able to afford it. I am willing to do anything and even erase my entire disc. However, for that the instructions on the Apple page state that 'Insert your Mac OS X 10.4 or 10.5 installation disc'. However, I do not have my installation disc Is there any other way I can erase the OS system and at least reboot my Macbook?
Info:
MacBook Pro
iMac os x Mavericks 10.9.3. I tried to boot up yesterday morning after completely shutting dwn the night before. Stays on grey screen with Apple logo. I tried safe mode, no luck, will not boot up in safe mode. I tried backing up to external hard drive from utilities, but it stopped and said something like couldn't perform function... I never used or set up Time Machine.
View 8 Replies View RelatedMy macbook pro will not start. It just goes to the white screen with the apple and the circular loading section but doesn't go further than that it just stays.
Info:
MacBook Pro, iOS 5.1
When I press the power button on my macbook it goes to the loading screen and stays there. It don't freeze it just keeps loading. I dropped it on the floor today but it worked after that.
View 10 Replies View RelatedI was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies View RelatedI have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable. Â
Info:
iMac, Mac OS X (10.6.8)
My 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can I fix this? I have tried:
• safe mode reboot
• restart using p, r , command and option (resetting the pram)
• restart using the original Mac OS 10.4 disc
• restart so I get the image of the HD but I can't click on it to continue and restart again!    • single user mode (CMD+s keys at bootup, and then /sbin/fsck -fy)Â
It just doesn't do anything else than display the grey screen, the apple and the spinning wheel (sometime, I do get a scrolling bar also!). I managed to perform a hardware test from the Mac OS disc and there seems to be no hardware problem. Nothing works.It stays stuck on the grey screen, with the apple and the wheel turning endlessly.Â
Info:
iMac, Mac OS X (10.4)
I deleted the entire vm folder and now my MacBook Pro won't get beyond the grey screen with the apple logo. I don't have any recovery discs with me. What can I do to rescue my MacBook Pro?
Info:MacBookPro, Mac OS X (10.7)
Mac book pro grey screen apple logo
Info:MacBook Pro (13-inch Early 2011), iOS 5.1.1, Mac book pro opening with grscreen
I have a macbook intel core duo and it shut down in the middle of watching a youtube video. It will not startup freezes at grey screen with apple logo (no spinning disc). There are no abnormal sounds or extreme temperatures. The macbook is just over one year old.I have tried the following:Ran disk warrior 4 in target disc mode - no problems found
View 10 Replies View RelatedWhen i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
View 2 Replies View RelatedSometimes, when I turn on my iMac (10.6.2), the system will not load, you can see the grey screen but empty, no apple logo there. I have to force a shutdown pressing the power button and when I turn it on for the second time it will work properly.
It only happens once in a while but I cannot understand why, since nothing changes.
PS.- I have verified my disk with the disk utility and everything seems fine.
Hoping someone can help - my imac (approx 15-18 months old , intel) won't start.
Last night on shutting down DPP (canon Digital image software) was hanging and system asked me if I wanted to force quit it...sadly I had switched off my bluetooth mouse and , as usually once mouse turned off switching it back on it never re connects - why did I buy the bletooth mouse and keyboard ?, so I could not confirm yes force quit - is there no way of selecting with keyboard like there is in windows ?
So I switched off at power switch. Tried to re switch on - grey screen came up, apple logo, the little timer circle but after a while timer circle stopped and nothing further happened.
have tried several more times and now don't even get timer.
Well I have managed to get the g5 tower dual 2.5ghz to boot up to the grey screen with the apple logo then it shuts itself down.
View 1 Replies View RelatedMacbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
I had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").
I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.
I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!
My MacBook Pro will not boot up any more. It just suddenly happened. It turns on and comes up to the gray screen with the apple logo and then the circle progress icon comes up and spins.
View 1 Replies View RelatedMy computer died last night with each application not responding. I couldn't shut down normally so I held the power button to turn it off.Â
Next morning, I tried to boot the MacBook Pro and the boot process stalled at the grey screen with the Apple Logo and spinning wheel. I let it go for an hour and there was no change on the screen. Based on Apple's desk I ran Hardware diagnostics (extended with looping disabled) and got the following errorÂ
4HDD/11/40000000: SATA (0,0) Â
The screen shot is belowÂ
I ran this again with standard testing (no looping) and standard with looping and all gave the same results.Â
Info:
MacBook Pro with Retina display, OS X Mountain Lion (10.8.2)
The computer is stuck on the apple screen with the spinning wheel. I can manage to boot up in safe mode but that is it. This arose from an apple security software download recently and when the machine went to reboot it could not. Now on a normal boot up it just sits on the grey screen with the spinning wheel for hours (if let). I have booted up in safe mode and removed anything from the Accounts that was other than the iTunes helper - rebooted - nothing
I have attempted an SMC and PRAM - again on reboot - nothing. I have also started in option mode but there are only two symbols that I can use one is a circular arrow, which does nothing when clicked and the other is a right pointing arrow that appears to attempt to launch OS X, to no avail. I have also tried the option of rebooting with the install disk in the drive and holding down the C key - again nothing.
I own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.
Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.
I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:
1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now
This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.
What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
View 1 Replies View RelatedOSX 10.4.11 (Tiger) PPC G4 733 MHz
My Tiger volume gets stuck when starting up, it doesn't get further then the grey screen with the Apple logo. The clock with stripes keeps working but it doesn't get me to the blue screen.
For compatibility reasons concerning different softwares i use (Protools, Reason etc...) i keep changing the internal HD's for years now, thus changing the OS's (10.3.9, 10.4.11 etc). Never caused any problem.
When i boot from another 'master' volume (f.e. 10.3.9) OR from the OSX install CD, putting the Tiger volume as 'slave', in order to verify its disk permissions or the disk itself to be able to repair them, it's 'invisible', not 'seen' by the other volume.
So no 'verify disk permissions' nor Combo Update possible, maybe those things could solve my problem.
My cables are working perfectly: making the exact same connections and jumper settings with all my other volumes, is no problem at all: every volume is correctly seen by the others.
Also, there is no USB or external firewire device connected while trying to start up.
Remark: never had any problem with this Tiger volume, starting problem only occured yesterday AFTER installing Toast Titanium (which worked normally), shutting down and trying to start up again.
Nevertheless, some minor problems occured beforehand these last days: some apps didn't work anymore, like Safari, itunes, installer and UnrarX. But i don't know if it's linked.
My power mac g5 has suddenly started to shut itself down in the early stages of boot up. The apple logo appears and the spinning timer logo spins befor a complete shut down.Â
I have used my o/s disc to access the disk utility. Repair disc is not an option. Verify disc is an option but this process fails due to " invalid nodes" Â
Info:
iPad 2, Mac OS X (10.5.8), G5 PPC 1.8ghz, iPhone4
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
