Software :: Emac Won't Start - Stays On The Apple Logo?
Jul 12, 2010my emac wont start i stays on the apple logo with the spinning gear? can anyone tell me how to fix it?
View 3 Repliesmy emac wont start i stays on the apple logo with the spinning gear? can anyone tell me how to fix it?
View 3 Repliesit stays with the apple logo on the screen and is processing, but nothing happens.Â
Info:
MacBook Air
Ok a g3/4 emac pc, boot it up, it makes the mac noise, screen turns on, you see the apple logo, then nothing, just doesn't load or anything, it just dies. I cant seem to hear any hard drive noise, but its impossible to know for sure, nut unless I take it all to bits.
View 4 Replies View Relatedmy Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around
Info:
iMac, iOS 4.3
My Mac was working perfectly fine until my charger broke. I ordered a new one online that took about a week to arrive. When I got the new charger the first time I used it my Mac was so slow some apps wouldn't even open. The 3rd time I had to force shutdown and now it turns on but won't pass the apple logo. My only worries are saving the things that were on my Mac, is there any way it can save it on a hard drive even tho it won't pass the apple sign?
Info:
MacBook Pro
When i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
View 2 Replies View Relatedwhen i start my imac it shows the apple logo, then the circle starts spinning and after a couple minutes it just shuts off. BTW i have windows on it as well so when i hold option it lets me open windows but not os
View 8 Replies View RelatedI am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
i just get the apple logo and a turning wheel on start up.
Info:MacBookPro
My MacBook Pro won't load past the start up page when I turn it on.
Info:
MacBook Pro
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
My 3-month old iMac was responding very slowly when I used the latest version of Safari. So I forced quit the program. From then on, whenever I turned on the iMac, it would get stuck at the Apple logo start up screen. I had to unplug the power since the machine is getting very hot after 15 mins.
View 3 Replies View RelatedThis situation began when I put my Imac on sleep. After, the screen turned on in black whit the cursor but I couldn't do anything.
Then to rebooted the machine, the apple logo and sound began fine but the screen turned off, so moving the mouse the screen turned on in black with cursor.Â
I'd tried many ways, resetting the PRAM, SMC, repairing the disk and permission, analyzing hardware, repairing fsck files.
Suddenly, when I entered in Verbose mode, mi imac brought into user choose screen and worked fine, but when I shut down and tried to start my mac in the next day, it didn´t work again.Â
Info:
iMac, OS X Mavericks (10.9.3)
I have an Early 2008 Mac Pro 3.2 GHz dual CPU (8 Cores in total) one day I started the system as usual and the system start till the Apple Gray Logo appears and then it reboots and keep doing this in (loop)
I started the Apple Hardware Diagnose and it hangs in the middle! the Apple Authorized shop/repair people told me (after the tried to fix it) it is mostly the Logic Board
Can it be the RAM or the CPUs? my mac is out of warranty and the cost to fix it is crazy! so I was thinking I can buy the parts and replace it my self.
My Macbook Pro is not starting past the grey screen and the apple logo and the rolling circle. I have tried every method and I am desperate to do anything to start my computer even erase the entire disc. I have contacted the Apple store and they told me the cost will be equivalent to $600 to just repair it and no way I will be able to afford it. I am willing to do anything and even erase my entire disc. However, for that the instructions on the Apple page state that 'Insert your Mac OS X 10.4 or 10.5 installation disc'. However, I do not have my installation disc Is there any other way I can erase the OS system and at least reboot my Macbook?
Info:
MacBook Pro
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies View RelatedMy daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data? Â
Info:
iMac, Mac OS X (10.4.4)
My ibook g4 when starting up stays on the grey logo screen with the loading circle , but won't do anything further I left it on for two days straight to see if it needed time to load but still nothing ... What do I do !?
Info:
iBook
Today just woke up and turned on my iMac. It started with apple logo then I saw a cancel logo which shocked me..
View 10 Replies View RelatedI am a high school teacher and in my lab, for the first time, I have an eMac (1 GHz G4), that, when I turn it on, all that shows is a grey screen with an apple in the middle. I tried doing a "mac-boot" to no avail.
View 1 Replies View Relatedmy macboook pro won't start and the caps light stays on, what can i do?
Info:
Mac Pro
My 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can I fix this? I have tried:
• safe mode reboot
• restart using p, r , command and option (resetting the pram)
• restart using the original Mac OS 10.4 disc
• restart so I get the image of the HD but I can't click on it to continue and restart again!    • single user mode (CMD+s keys at bootup, and then /sbin/fsck -fy)Â
It just doesn't do anything else than display the grey screen, the apple and the spinning wheel (sometime, I do get a scrolling bar also!). I managed to perform a hardware test from the Mac OS disc and there seems to be no hardware problem. Nothing works.It stays stuck on the grey screen, with the apple and the wheel turning endlessly.Â
Info:
iMac, Mac OS X (10.4)
When I close my Mac Book Pro the apple stays lit. What do I do?
Info:
MacBook Pro
My MacBook stays at the apple screen.What can I do to fix the problem?
Info:
MacBook
When I hit the power button it gets stuck in the Apple. Being that I have an older powerbook g4 I would need a way to get to the first aid application for a command prompt or an original 10.4 disk which I don't have.
Info:
PowerBook, Mac OS X (10.4)
I know this is kind of off topic and the logo does not make the product any different but I found it a little odd that Apple decided to not to put their logo on the remote. It's made out of aluminum and has enough space on the back for a logo to be present. Apple put's their logo on everything that has enough space for one. The old remote had it, mouse, keyboard, MacBook/MacBook Pro, iMac, Mac mini, Mac Pro, iPod's, iPhone, docks, and gift cards all have it. Their earphones don't have it because they are to small to put a logo without making them look stupid. I wonder what Jonathan Ive and Jobs were thinking when they decided to not put the logo. The back of the remote almost seems bare without it.
View 2 Replies View RelatedMy wife's macbook will turn on, it stays on the gray screen with the apple. After a while it will just shutoff. I have tried removing the battery and holding down the power button for 5secs but did not work. I also reset the pram and also did nothing.
View 1 Replies View Relatedwhy my notebook screen goes blue sometimes and i can't do anything? even turn it off?
Info:
MacBook Pro, Mac OS X (10.7.4)
My setup location for internet has five locations and I want to erase them and start over.
Info:
Mac OS X (10.4.11)
MacBook mac OS will not start. Just white screen no logo. All was well until I went through aiorport security?
Info:
MacBook, Mac OS X (10.7.4)