So with the lack of Gigabit ethernet options on the Macbook Air, I'm kinda hoping that some bright spark on here is going to shower me with suggestions on what 3rd party adaptors are available/been used. I've had a real good hunt around, and the only adaptor which I can find that people have got excited about (back in 2009!) was the Buffalo one... Annoyingly, this is pretty much nowhere to be found. The one thing stopping me from getting an MBA is the gig-e problem. As I use time-machine for backups, and transfer relatively large files around between offices<->datacentres<->home, it's rather important.
Just wanted to share how well the Monoprice USB 2 gigabit ethernet adapter works on the new MacBook Air. It costs only $20. The speed I get is 30Mbyte/s over my wired home network. Here is the link: [URL]. For Mac OS X, you must use the drivers on the enclosed mini-CD as the default Apple ones do not work. For Bootcamp/Windows 7, download from [URL] the chip manufacturer. Works great and much faster than Apple's fast Ethernet adapter or WLAN.
Has anyone had issues upgrading Thunderbolt to 1.2.1 to support the new gigabit Ethernet adapter? I have tried about 6 times to do the update but my ethernet adapter still isn't being detected.
As the new MBA has an accessory (Thunderbolt ethernet adapter), will its transmission speed be significantly faster than using an old USB ethernet adapter in one of the new MBA's USB ports?
I have my iMac (2009 model) and MacBook Pro (2011) connected to a D-Link Gigabit switch using CAT5E cables.Switch is connected to my router using gigabit connection. Switch is showing gigabit connections for the link to the router and the link to the MacBook Pro (MBP). Link to the iMac only shows 100 mbit connection.
Cables are ok since behaviour is exactely the same when I change/swap iMac and MBP.
When I go the network/ethernet settings in iMac and change from "automatic" to "manual" and select gigabit, the iMac claims there is no network cable connected at all. When changing back to "automatic", connection is re-established but again with 100mbit connection only.
[code]...
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8)
Is there such a thing for Macs? Can the network card be upgraded? I just browsed over a 100 on NewEgg and not a single one mentions OSX support. Does this work like alot of accessories where you just plug in (via PCI heh) and it just works or im stuck with 10/100? (all equipment in the house is N with Gigabit so if I could turn the PowerMac G5 into a Gigabit Machine, I could network files SOO much faster, other wise, its just a bottle neck)
Despite the prevalence of OS X in the Mac market place now, I've been unable to get OS X versions of some applications I use now and then, and a few games whose source-code no-one seems even willing to acknowledge ever existed, so I have an older blue and white G3 (300mhz) lying around. However, I no longer have any monitors I can really reliably use with it, so I was thinking I'd use VNC to remote-desktop into it instead. I got this all set-up, and it works okay-ish, but the main issue is speed. I'm connecting to it via a direct connection to my Mac Pro, which of course has gigabit ethernet, so I figured it might be possible to pick up a gigabit ethernet card somewhere, but with OS 9 being so old there is the issue of drivers. I'm hoping someone here might know where I can find a gigabit ethernet card for my G3? I may try firewire to see if that works at all, but I suspect that gigabit ethernet would be better overall if I can get that.
In my house there is a wired and wireless connection.
On my macbook (2008 Al) the port on the side is gigabit internet.
In my house the cables are all ethernet (blue cables). These do not fit in the port on the side. Is there a way or an adapter to convert the ethernet to a gigabit connection?
Our still photographic studio has a range of MACs all connected via a gigabit D-Link switch to a series of Buffalo NAS raids. Wiring is CAT5e, all devices have gigabit ethernet cards and the link lights on the switch suggest that all devices are connected at that speed. We currently get file transfer rates of between 5 and 12 MB/s depending on network traffic. We would like to upgrade our NAS to a NAS/SAN, preferably using the existing wiring (and avoid the expense of Fibrenet). 50 or 60MB/s would be great if possible. Any suitable architecture and Hardware. Cable lengths are a maximum of 30 metres.
I just got a MacPro at work and I will use this machine in conjunction with my Powerbook a lot. I realized that I could connect the Powerbook to the MacPro with an ethernet cable, given that the MacPro has two ethernet ports. I turned on internet sharing and I am able to browse from the Powerbook and connect to the MacPro as a server. I expected near Gigabit connection speeds when transfering files between machines
Anyone have good luck with a gig-e->USB adapter? I'm planning to get a MBA and cinema display, but I need the use of gigabit ethernet. Will it work well if I plug it into the USB hub on the display and will I be able to max out the USB connection?
I have a gigabit AEBS, that only gets 12 MB/sec MAX when I transfer files between my 2 macs via ethernet cable. I get 45 MB/sec MAX when I connect the 2 macs directly to each other via ethernet cable. What the hell is going on here? is this typical of the AEBS? I would expect these numbers from the 100Mbps AEBS, but not the gigabit version.
I've been looking around for an additional gigabit ethernet card for my single 1.8 G5 processor. I've read many of the postings but they relate to the 1.8 dual processor with pci-x. I only have pci slots (4 ram slot model - late 2004 revision) and am stumped.
The DGE-528T looked like it may work, then I read it hasnt been confirmed as working for the G5 sinle processor as of yet.
The next card that may work is the Intel PRO/1000MT.
Information: Single processor G5 Mac OS X (10.3.9)
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
I'm a PC guy (unfortunately), and I wanted to get my wife (graphic designer) a Mac present for our 3 year wedding anniversary (maybe a bad choice). As a cheep axx i looked on eBay for best deals... and happen to stumble upon an old G4 (Gigabit Ethernet) Dual 500MHz tower. I understand that is a old model, but the budget constrains gave me a no better choice... $300-400. For the first Apple it is a start.To make it up i got her a 23" Cinema Display.My dilemma as you see is the old vs new technology. I have not yet received the merchandise, but as i read I'm up for a surprise.
1. Do i need a power adapter for the display? 2. Do i need a ADC converter (or something like it)? 3. What (cheep) Graphic card will be a plausible fit to avoid conversions? 4. Will that card work with my motherboard (if there is one inside lol)
So far browsing i got: Recomendations RADEON 9800 Series
Requirements: Power Mac G4 or G5 with NVIDIA graphics card or ATI Radeon 7500 or better graphics card Limitations: The Power Mac G4 Cube computer must have a Nvidia Geforce 2MX graphics card to be compatible with the Apple Cinema Display HD or Apple Cinema Display (20-inch). he Power Mac G4 - (Gigabit Ethernet) video card does not support the Apple Cinema Display HD or Apple Cinema Display (20-inch) unless the original video card is updated to one that meets the specification for the display.
Am seriously considering the new AEBS but seems some confusion over whether the ports offer gigabit Ethernet, can someone with the router confirm or deny this? Also how is the range compared with similar N routers?
Just picked up the adaptor today and thought it was pretty much a no brainer: plug it in, it works. Not in this case, it keeps getting a self assigned IP address and I can't connect to the internet-although there is a green light next to the ethernet adaptor in System preferences. I have an Airport network set up as a normal scenario. I bought this adaptor only because I am about to take a trip and the hotel only has ethernet in the rooms. I've tried using the diagnostic tool, but it keeps hanging and crashing.
I have a Macbook.Recently the sound on my Macbook has become very quiet and lacking in bass. I have checked all sound settings. The issue persists in OSX and Windows. The issue occurs with both speakers. Laptop has not been dropped or abused.Sound
In preparation for leaving MobileMe, I was clearing out my iDisk. Im noticing there are some old sync files in the Library/Application Support/ that cant be deleted (Contacts, Bookmarks, etc.).Â
I get the error: "The operation can’t be completed because you don’t have permission to access some of the items."Â
I believe these might be old sync files from back in the .Mac days. Not a catastrophe by any stretch, but I'd like to be able to clear everything out before being completely disconnected from MobileMe if possible.
Why is time machine saying that it cannot restore a file due to access persmissions when all I'm trying to do is restore a single file for my one and only user on the same computer that created the backup? Shouldn't that just work?
I bought a new Sandisk Extreme SSD 240GB and installed it. In System Information, the Link Speed is shown as 3 Gigabit but the Negotiated Link Speed is only 1.5 Gigabit. What's the difference between the two values? And why is the Negotiated Link Speed is only 1.5 Gigabit?
I was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
I just bought an airport extreme w/gigabit, and I'm wondering if it's possible to connect an ethernet switch to one of my pro's ethernet ports and have things like my xbox 360 and ps3 run off it, however, my mac pro would be connected to my airport extreme via 802.11n. is that possible?
i been reading up on the drive limitations of a powermac g4 gigabit models and it seems the most it can handle with out any user intervention is a 120gig hdd. now i wanna put a 320gig in that sucker how would i go about doing it?
